From: Dave Chinner <david@fromorbit.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH 34/42] mkfs: factor rt device validation
Date: Wed, 30 Aug 2017 09:50:44 +1000 [thread overview]
Message-ID: <20170829235052.21050-35-david@fromorbit.com> (raw)
In-Reply-To: <20170829235052.21050-1-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
---
mkfs/xfs_mkfs.c | 109 ++++++++++++++++++++++++++++++++------------------------
1 file changed, 63 insertions(+), 46 deletions(-)
diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index 2fcc0d39a0a8..c6032e4af4c5 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -2661,6 +2661,64 @@ reported by the device (%u).\n"),
}
static void
+validate_rtdev(
+ struct mkfs_params *cfg,
+ struct cli_params *cli,
+ char **devname)
+{
+ struct libxfs_xinit *xi = cli->xi;
+
+ *devname = NULL;
+
+ if (!xi->rtdev) {
+ if (cli->rtsize) {
+ fprintf(stderr,
+_("size specified for non-existent rt subvolume\n"));
+ usage();
+ }
+
+ *devname = _("none");
+ cfg->rtblocks = 0;
+ cfg->rtextents = 0;
+ cfg->rtbmblocks = 0;
+ return;
+ }
+ if (!xi->rtsize) {
+ fprintf(stderr, _("Invalid zero length rt subvolume found\n"));
+ usage();
+ }
+
+ /* volume rtdev */
+ if (xi->volname)
+ *devname = _("volume rt");
+ else
+ *devname = xi->rtname;
+
+ if (cli->rtsize) {
+ if (cfg->rtblocks > DTOBT(xi->rtsize, cfg->blocklog)) {
+ fprintf(stderr,
+_("size %s specified for rt subvolume is too large, maxi->um is %lld blocks\n"),
+ cli->rtsize,
+ (long long)DTOBT(xi->rtsize, cfg->blocklog));
+ usage();
+ }
+ if (xi->rtbsize > cfg->sectorsize) {
+ fprintf(stderr, _(
+"Warning: the realtime subvolume sector size %u is less than the sector size\n\
+reported by the device (%u).\n"),
+ cfg->sectorsize, xi->rtbsize);
+ }
+ } else {
+ /* grab volume size */
+ cfg->rtblocks = DTOBT(xi->rtsize, cfg->blocklog);
+ }
+
+ cfg->rtextents = cfg->rtblocks / cfg->rtextblocks;
+ cfg->rtbmblocks = (xfs_extlen_t)howmany(cfg->rtextents,
+ NBBY * cfg->blocksize);
+}
+
+static void
print_mkfs_cfg(
struct mkfs_params *cfg,
char *dfile,
@@ -3333,7 +3391,6 @@ main(
xfs_extlen_t rtextblocks;
xfs_rtblock_t rtextents;
char *rtfile;
- char *rtsize;
xfs_sb_t *sbp;
int sectorlog;
uint64_t tmp_agsize;
@@ -3407,7 +3464,7 @@ main(
logagno = logblocks = rtblocks = rtextblocks = 0;
imaxpct = inodelog = inopblock = isize = 0;
dfile = logfile = rtfile = NULL;
- logsize = rtsize = protofile = NULL;
+ logsize = protofile = NULL;
dsunit = dswidth = lalign = lsunit = 0;
nodsflag = 0;
force_overwrite = 0;
@@ -3426,6 +3483,7 @@ main(
break;
case 'b':
case 'n':
+ case 'r':
case 's':
parse_subopts(c, optarg, &cli);
break;
@@ -3487,14 +3545,6 @@ main(
case 'q':
quiet = 1;
break;
- case 'r':
- parse_subopts(c, optarg, &cli);
-
- /* temp don't break code */
- rtsize = cli.rtsize;
- /* end temp don't break code */
- break;
- break;
case 'V':
printf(_("%s version %s\n"), progname, VERSION);
exit(0);
@@ -3550,6 +3600,7 @@ main(
open_devices(&cfg, &xi, (discard && !dry_run));
validate_datadev(&cfg, &cli);
validate_logdev(&cfg, &cli, &logfile);
+ validate_rtdev(&cfg, &cli, &rtfile);
/* temp don't break code */
sectorsize = cfg.sectorsize;
@@ -3569,48 +3620,14 @@ main(
logblocks = cfg.logblocks;
rtblocks = cfg.rtblocks;
rtextblocks = cfg.rtextblocks;
+ nbmblocks = cfg.rtbmblocks;
+ rtextents = cfg.rtextents;
dsunit = cfg.dsunit;
dswidth = cfg.dswidth;
lsunit = cfg.lsunit;
nodsflag = cfg.sb_feat.nodalign;
/* end temp don't break code */
- if (xi.rtname)
- rtfile = xi.rtname;
- else
- if (xi.volname && xi.rtdev)
- rtfile = _("volume rt");
- else if (!xi.rtdev)
- rtfile = _("none");
-
- if (rtsize && xi.rtsize > 0 && xi.rtbsize > sectorsize) {
- fprintf(stderr, _(
-"Warning: the realtime subvolume sector size %u is less than the sector size\n\
-reported by the device (%u).\n"),
- sectorsize, xi.rtbsize);
- }
-
- if (rtsize && xi.rtsize > 0 && rtblocks > DTOBT(xi.rtsize, blocklog)) {
- fprintf(stderr,
- _("size %s specified for rt subvolume is too large, "
- "maximum is %lld blocks\n"),
- rtsize, (long long)DTOBT(xi.rtsize, blocklog));
- usage();
- } else if (!rtsize && xi.rtsize > 0)
- rtblocks = DTOBT(xi.rtsize, blocklog);
- else if (rtsize && !xi.rtdev) {
- fprintf(stderr,
- _("size specified for non-existent rt subvolume\n"));
- usage();
- }
- if (xi.rtdev) {
- rtextents = rtblocks / rtextblocks;
- nbmblocks = (xfs_extlen_t)howmany(rtextents, NBBY * blocksize);
- } else {
- rtextents = rtblocks = 0;
- nbmblocks = 0;
- }
-
if (dasize) { /* User-specified AG size */
/*
* Check specified agsize is a multiple of blocksize.
--
2.13.3
next prev parent reply other threads:[~2017-08-29 23:51 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-29 23:50 [PATCH 00/42] mkfs: factor the crap out of the code Dave Chinner
2017-08-29 23:50 ` [PATCH 01/42] mkfs: can't specify sector size of internal log Dave Chinner
2017-08-29 23:50 ` [PATCH 02/42] mkfs: make subopt table const Dave Chinner
2017-08-29 23:50 ` [PATCH 03/42] mkfs: introduce a structure to hold CLI options Dave Chinner
2017-08-29 23:50 ` [PATCH 04/42] mkfs: add generic subopt parsing table Dave Chinner
2017-08-29 23:50 ` [PATCH 05/42] mkfs: factor block subopts parser Dave Chinner
2017-08-29 23:50 ` [PATCH 06/42] mkfs: factor data " Dave Chinner
2017-08-29 23:50 ` [PATCH 07/42] mkfs: factor inode " Dave Chinner
2017-08-29 23:50 ` [PATCH 08/42] mkfs: factor log " Dave Chinner
2017-08-29 23:50 ` [PATCH 09/42] mkfs: factor meta " Dave Chinner
2017-08-29 23:50 ` [PATCH 10/42] mkfs: factor naming " Dave Chinner
2017-08-29 23:50 ` [PATCH 11/42] mkfs: factor rt " Dave Chinner
2017-08-29 23:50 ` [PATCH 12/42] mkfs: factor sector " Dave Chinner
2017-08-29 23:50 ` [PATCH 13/42] mkfs: Introduce mkfs configuration structure Dave Chinner
2017-08-29 23:50 ` [PATCH 14/42] mkfs: factor printing of mkfs config Dave Chinner
2017-08-29 23:50 ` [PATCH 15/42] mkfs: factor in memory superblock setup Dave Chinner
2017-08-29 23:50 ` [PATCH 16/42] mkfs: factor out device preparation Dave Chinner
2017-08-29 23:50 ` [PATCH 17/42] mkfs: factor writing AG headers Dave Chinner
2017-08-29 23:50 ` [PATCH 18/42] mkfs: factor secondary superblock updates Dave Chinner
2017-08-29 23:50 ` [PATCH 19/42] mkfs: introduce default configuration structure Dave Chinner
2017-08-29 23:50 ` [PATCH 20/42] mkfs: rename top level CLI parameters Dave Chinner
2017-08-29 23:50 ` [PATCH 21/42] mkfs: factor sectorsize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 22/42] mkfs: factor blocksize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 23/42] mkfs: factor log sector size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 24/42] mkfs: factor superblock feature validation Dave Chinner
2017-08-29 23:50 ` [PATCH 25/42] mkfs: factor directory blocksize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 26/42] mkfs: factor inode size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 27/42] mkfs: factor out device size calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 28/42] mkfs: fix hidden parameter in DTOBT() Dave Chinner
2017-08-29 23:50 ` [PATCH 29/42] mkfs: factor rtdev extent size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 30/42] mkfs: rework stripe calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 31/42] mkfs: factor device opening Dave Chinner
2017-08-29 23:50 ` [PATCH 32/42] mkfs: factor data device validation Dave Chinner
2017-08-29 23:50 ` [PATCH 33/42] mkfs: factor log " Dave Chinner
2017-08-29 23:50 ` Dave Chinner [this message]
2017-08-29 23:50 ` [PATCH 35/42] mkfs: factor AG geometry calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 36/42] mkfs: factor AG alignment Dave Chinner
2017-08-30 23:44 ` Dave Chinner
2017-08-29 23:50 ` [PATCH 37/42] mkfs: rework imaxpct calculation Dave Chinner
2017-08-29 23:50 ` [PATCH 38/42] mkfs: factor initial mount setup Dave Chinner
2017-08-29 23:50 ` [PATCH 39/42] mkfs: factor log size calculations Dave Chinner
2017-09-05 5:23 ` Dave Chinner
2017-08-29 23:50 ` [PATCH 40/42] mkfs: cleanup redundant temporary code Dave Chinner
2017-08-29 23:50 ` [PATCH 41/42] mkfs: move error functions Dave Chinner
2017-08-29 23:50 ` [PATCH 42/42] mkfs: tidy up definitions Dave Chinner
2017-08-30 1:23 ` [PATCH 00/42] mkfs: factor the crap out of the code Darrick J. Wong
2017-08-30 1:57 ` Dave Chinner
2017-08-30 4:16 ` Luis R. Rodriguez
2017-08-30 5:44 ` Dave Chinner
2017-08-30 22:10 ` Luis R. Rodriguez
2017-08-30 23:22 ` Dave Chinner
2017-08-31 0:05 ` Luis R. Rodriguez
2017-08-31 16:23 ` Jan Tulak
2017-08-30 7:44 ` Martin Steigerwald
2017-09-04 12:31 ` Chandan Rajendra
2017-09-04 15:34 ` Eric Sandeen
2017-09-04 22:40 ` Dave Chinner
2017-09-07 10:31 ` Chandan Rajendra
2017-09-07 23:38 ` Dave Chinner
2017-09-09 10:24 ` Chandan Rajendra
2017-09-15 9:42 ` Jan Tulak
2017-09-16 11:29 ` Dave Chinner
2017-10-24 3:00 ` Eric Sandeen
2017-10-25 0:59 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170829235052.21050-35-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).