From: Dave Chinner <david@fromorbit.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH 07/42] mkfs: factor inode subopts parser
Date: Wed, 30 Aug 2017 09:50:17 +1000 [thread overview]
Message-ID: <20170829235052.21050-8-david@fromorbit.com> (raw)
In-Reply-To: <20170829235052.21050-1-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
---
mkfs/xfs_mkfs.c | 94 +++++++++++++++++++++++++++++----------------------------
1 file changed, 48 insertions(+), 46 deletions(-)
diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index c92abc9a6bf3..d702010c2854 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -1566,6 +1566,37 @@ inode_opts_parser(
char *value,
struct cli_params *cli)
{
+ int inodelog;
+
+ switch (subopt) {
+ case I_ALIGN:
+ cli->sb_feat.inode_align = getnum(value, &iopts, I_ALIGN);
+ break;
+ case I_LOG:
+ inodelog = getnum(value, &iopts, I_LOG);
+ cli->inodesize = 1 << inodelog;
+ break;
+ case I_MAXPCT:
+ cli->imaxpct = getnum(value, &iopts, I_MAXPCT);
+ break;
+ case I_PERBLOCK:
+ cli->inopblock = getnum(value, &iopts, I_PERBLOCK);
+ break;
+ case I_SIZE:
+ cli->inodesize = getnum(value, &iopts, I_SIZE);
+ break;
+ case I_ATTR:
+ cli->sb_feat.attr_version = getnum(value, &iopts, I_ATTR);
+ break;
+ case I_PROJID32BIT:
+ cli->sb_feat.projid16bit = !getnum(value, &iopts, I_PROJID32BIT);
+ break;
+ case I_SPINODES:
+ cli->sb_feat.spinodes = getnum(value, &iopts, I_SPINODES);
+ break;
+ default:
+ return -EINVAL;
+ }
return 0;
}
@@ -1780,6 +1811,7 @@ main(
};
struct cli_params cli = {
.xi = &xi,
+ .sb_feat = sb_feat,
};
platform_uuid_generate(&uuid);
@@ -1863,53 +1895,19 @@ main(
/* end temp don't break code */
break;
case 'i':
- p = optarg;
- while (*p != '\0') {
- char **subopts = (char **)iopts.subopts;
- char *value;
+ parse_subopts(c, optarg, &cli);
- switch (getsubopt(&p, subopts, &value)) {
- case I_ALIGN:
- sb_feat.inode_align = getnum(value,
- &iopts, I_ALIGN);
- break;
- case I_LOG:
- inodelog = getnum(value, &iopts, I_LOG);
- isize = 1 << inodelog;
- ilflag = 1;
- break;
- case I_MAXPCT:
- imaxpct = getnum(value, &iopts,
- I_MAXPCT);
- imflag = 1;
- break;
- case I_PERBLOCK:
- inopblock = getnum(value, &iopts,
- I_PERBLOCK);
- ipflag = 1;
- break;
- case I_SIZE:
- isize = getnum(value, &iopts, I_SIZE);
- inodelog = libxfs_highbit32(isize);
- isflag = 1;
- break;
- case I_ATTR:
- sb_feat.attr_version =
- getnum(value, &iopts, I_ATTR);
- break;
- case I_PROJID32BIT:
- sb_feat.projid16bit =
- !getnum(value, &iopts,
- I_PROJID32BIT);
- break;
- case I_SPINODES:
- sb_feat.spinodes = getnum(value,
- &iopts, I_SPINODES);
- break;
- default:
- unknown('i', value);
- }
- }
+ /* temp don't break code */
+ isize = cli.inodesize;
+ inodelog = libxfs_highbit32(isize);
+ inopblock = cli.inopblock;
+ ilflag = cli_opt_set(&iopts, I_LOG);
+ isflag = cli_opt_set(&iopts, I_SIZE);
+ ipflag = cli_opt_set(&iopts, I_PERBLOCK);
+
+ imaxpct = cli.imaxpct;
+ imflag = cli_opt_set(&iopts, I_MAXPCT);
+ /* end temp don't break code */
break;
case 'l':
p = optarg;
@@ -2157,6 +2155,10 @@ main(
} else
dfile = xi.dname;
+ /* temp don't break code */
+ sb_feat = cli.sb_feat;
+ /* end temp don't break code */
+
/*
* Blocksize and sectorsize first, other things depend on them
* For RAID4/5/6 we want to align sector size and block size,
--
2.13.3
next prev parent reply other threads:[~2017-08-29 23:51 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-29 23:50 [PATCH 00/42] mkfs: factor the crap out of the code Dave Chinner
2017-08-29 23:50 ` [PATCH 01/42] mkfs: can't specify sector size of internal log Dave Chinner
2017-08-29 23:50 ` [PATCH 02/42] mkfs: make subopt table const Dave Chinner
2017-08-29 23:50 ` [PATCH 03/42] mkfs: introduce a structure to hold CLI options Dave Chinner
2017-08-29 23:50 ` [PATCH 04/42] mkfs: add generic subopt parsing table Dave Chinner
2017-08-29 23:50 ` [PATCH 05/42] mkfs: factor block subopts parser Dave Chinner
2017-08-29 23:50 ` [PATCH 06/42] mkfs: factor data " Dave Chinner
2017-08-29 23:50 ` Dave Chinner [this message]
2017-08-29 23:50 ` [PATCH 08/42] mkfs: factor log " Dave Chinner
2017-08-29 23:50 ` [PATCH 09/42] mkfs: factor meta " Dave Chinner
2017-08-29 23:50 ` [PATCH 10/42] mkfs: factor naming " Dave Chinner
2017-08-29 23:50 ` [PATCH 11/42] mkfs: factor rt " Dave Chinner
2017-08-29 23:50 ` [PATCH 12/42] mkfs: factor sector " Dave Chinner
2017-08-29 23:50 ` [PATCH 13/42] mkfs: Introduce mkfs configuration structure Dave Chinner
2017-08-29 23:50 ` [PATCH 14/42] mkfs: factor printing of mkfs config Dave Chinner
2017-08-29 23:50 ` [PATCH 15/42] mkfs: factor in memory superblock setup Dave Chinner
2017-08-29 23:50 ` [PATCH 16/42] mkfs: factor out device preparation Dave Chinner
2017-08-29 23:50 ` [PATCH 17/42] mkfs: factor writing AG headers Dave Chinner
2017-08-29 23:50 ` [PATCH 18/42] mkfs: factor secondary superblock updates Dave Chinner
2017-08-29 23:50 ` [PATCH 19/42] mkfs: introduce default configuration structure Dave Chinner
2017-08-29 23:50 ` [PATCH 20/42] mkfs: rename top level CLI parameters Dave Chinner
2017-08-29 23:50 ` [PATCH 21/42] mkfs: factor sectorsize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 22/42] mkfs: factor blocksize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 23/42] mkfs: factor log sector size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 24/42] mkfs: factor superblock feature validation Dave Chinner
2017-08-29 23:50 ` [PATCH 25/42] mkfs: factor directory blocksize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 26/42] mkfs: factor inode size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 27/42] mkfs: factor out device size calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 28/42] mkfs: fix hidden parameter in DTOBT() Dave Chinner
2017-08-29 23:50 ` [PATCH 29/42] mkfs: factor rtdev extent size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 30/42] mkfs: rework stripe calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 31/42] mkfs: factor device opening Dave Chinner
2017-08-29 23:50 ` [PATCH 32/42] mkfs: factor data device validation Dave Chinner
2017-08-29 23:50 ` [PATCH 33/42] mkfs: factor log " Dave Chinner
2017-08-29 23:50 ` [PATCH 34/42] mkfs: factor rt " Dave Chinner
2017-08-29 23:50 ` [PATCH 35/42] mkfs: factor AG geometry calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 36/42] mkfs: factor AG alignment Dave Chinner
2017-08-30 23:44 ` Dave Chinner
2017-08-29 23:50 ` [PATCH 37/42] mkfs: rework imaxpct calculation Dave Chinner
2017-08-29 23:50 ` [PATCH 38/42] mkfs: factor initial mount setup Dave Chinner
2017-08-29 23:50 ` [PATCH 39/42] mkfs: factor log size calculations Dave Chinner
2017-09-05 5:23 ` Dave Chinner
2017-08-29 23:50 ` [PATCH 40/42] mkfs: cleanup redundant temporary code Dave Chinner
2017-08-29 23:50 ` [PATCH 41/42] mkfs: move error functions Dave Chinner
2017-08-29 23:50 ` [PATCH 42/42] mkfs: tidy up definitions Dave Chinner
2017-08-30 1:23 ` [PATCH 00/42] mkfs: factor the crap out of the code Darrick J. Wong
2017-08-30 1:57 ` Dave Chinner
2017-08-30 4:16 ` Luis R. Rodriguez
2017-08-30 5:44 ` Dave Chinner
2017-08-30 22:10 ` Luis R. Rodriguez
2017-08-30 23:22 ` Dave Chinner
2017-08-31 0:05 ` Luis R. Rodriguez
2017-08-31 16:23 ` Jan Tulak
2017-08-30 7:44 ` Martin Steigerwald
2017-09-04 12:31 ` Chandan Rajendra
2017-09-04 15:34 ` Eric Sandeen
2017-09-04 22:40 ` Dave Chinner
2017-09-07 10:31 ` Chandan Rajendra
2017-09-07 23:38 ` Dave Chinner
2017-09-09 10:24 ` Chandan Rajendra
2017-09-15 9:42 ` Jan Tulak
2017-09-16 11:29 ` Dave Chinner
2017-10-24 3:00 ` Eric Sandeen
2017-10-25 0:59 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170829235052.21050-8-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).