From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: Dave Chinner <david@fromorbit.com>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [PATCH 1/7] mkfs: use opts parameter during option parsing
Date: Tue, 19 Dec 2017 18:47:31 -0800 [thread overview]
Message-ID: <20171220024731.GJ12613@magnolia> (raw)
In-Reply-To: <20171218091158.14537-2-david@fromorbit.com>
On Mon, Dec 18, 2017 at 08:11:52PM +1100, Dave Chinner wrote:
> From: Dave Chinner <dchinner@redhat.com>
>
> Rather than hard coding the global table variable into the
> parsing functions.
>
> Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Looks ok,
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
> ---
> mkfs/xfs_mkfs.c | 60 ++++++++++++++++++++++++++++-----------------------------
> 1 file changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
> index e38810f53386..f79062da4ff4 100644
> --- a/mkfs/xfs_mkfs.c
> +++ b/mkfs/xfs_mkfs.c
> @@ -1533,29 +1533,29 @@ inode_opts_parser(
>
> switch (subopt) {
> case I_ALIGN:
> - cli->sb_feat.inode_align = getnum(value, &iopts, I_ALIGN);
> + cli->sb_feat.inode_align = getnum(value, opts, I_ALIGN);
> break;
> case I_LOG:
> - inodelog = getnum(value, &iopts, I_LOG);
> + inodelog = getnum(value, opts, I_LOG);
> cli->inodesize = 1 << inodelog;
> break;
> case I_MAXPCT:
> - cli->imaxpct = getnum(value, &iopts, I_MAXPCT);
> + cli->imaxpct = getnum(value, opts, I_MAXPCT);
> break;
> case I_PERBLOCK:
> - cli->inopblock = getnum(value, &iopts, I_PERBLOCK);
> + cli->inopblock = getnum(value, opts, I_PERBLOCK);
> break;
> case I_SIZE:
> - cli->inodesize = getnum(value, &iopts, I_SIZE);
> + cli->inodesize = getnum(value, opts, I_SIZE);
> break;
> case I_ATTR:
> - cli->sb_feat.attr_version = getnum(value, &iopts, I_ATTR);
> + cli->sb_feat.attr_version = getnum(value, opts, I_ATTR);
> break;
> case I_PROJID32BIT:
> - cli->sb_feat.projid16bit = !getnum(value, &iopts, I_PROJID32BIT);
> + cli->sb_feat.projid16bit = !getnum(value, opts, I_PROJID32BIT);
> break;
> case I_SPINODES:
> - cli->sb_feat.spinodes = getnum(value, &iopts, I_SPINODES);
> + cli->sb_feat.spinodes = getnum(value, opts, I_SPINODES);
> break;
> default:
> return -EINVAL;
> @@ -1574,40 +1574,40 @@ log_opts_parser(
>
> switch (subopt) {
> case L_AGNUM:
> - cli->logagno = getnum(value, &lopts, L_AGNUM);
> + cli->logagno = getnum(value, opts, L_AGNUM);
> break;
> case L_FILE:
> - cli->xi->lisfile = getnum(value, &lopts, L_FILE);
> + cli->xi->lisfile = getnum(value, opts, L_FILE);
> break;
> case L_INTERNAL:
> - cli->loginternal = getnum(value, &lopts, L_INTERNAL);
> + cli->loginternal = getnum(value, opts, L_INTERNAL);
> break;
> case L_SU:
> - cli->lsu = getstr(value, &lopts, L_SU);
> + cli->lsu = getstr(value, opts, L_SU);
> break;
> case L_SUNIT:
> - cli->lsunit = getnum(value, &lopts, L_SUNIT);
> + cli->lsunit = getnum(value, opts, L_SUNIT);
> break;
> case L_NAME:
> case L_DEV:
> - cli->xi->logname = getstr(value, &lopts, L_NAME);
> + cli->xi->logname = getstr(value, opts, L_NAME);
> cli->loginternal = 0;
> break;
> case L_VERSION:
> - cli->sb_feat.log_version = getnum(value, &lopts, L_VERSION);
> + cli->sb_feat.log_version = getnum(value, opts, L_VERSION);
> break;
> case L_SIZE:
> - cli->logsize = getstr(value, &lopts, L_SIZE);
> + cli->logsize = getstr(value, opts, L_SIZE);
> break;
> case L_SECTLOG:
> - lsectorlog = getnum(value, &lopts, L_SECTLOG);
> + lsectorlog = getnum(value, opts, L_SECTLOG);
> cli->lsectorsize = 1 << lsectorlog;
> break;
> case L_SECTSIZE:
> - cli->lsectorsize = getnum(value, &lopts, L_SECTSIZE);
> + cli->lsectorsize = getnum(value, opts, L_SECTSIZE);
> break;
> case L_LAZYSBCNTR:
> - cli->sb_feat.lazy_sb_counters = getnum(value, &lopts, L_LAZYSBCNTR);
> + cli->sb_feat.lazy_sb_counters = getnum(value, opts, L_LAZYSBCNTR);
> break;
> default:
> return -EINVAL;
> @@ -1624,12 +1624,12 @@ meta_opts_parser(
> {
> switch (subopt) {
> case M_CRC:
> - cli->sb_feat.crcs_enabled = getnum(value, &mopts, M_CRC);
> + cli->sb_feat.crcs_enabled = getnum(value, opts, M_CRC);
> if (cli->sb_feat.crcs_enabled)
> cli->sb_feat.dirftype = true;
> break;
> case M_FINOBT:
> - cli->sb_feat.finobt = getnum(value, &mopts, M_FINOBT);
> + cli->sb_feat.finobt = getnum(value, opts, M_FINOBT);
> break;
> case M_UUID:
> if (!value || *value == '\0')
> @@ -1638,10 +1638,10 @@ meta_opts_parser(
> illegal(value, "m uuid");
> break;
> case M_RMAPBT:
> - cli->sb_feat.rmapbt = getnum(value, &mopts, M_RMAPBT);
> + cli->sb_feat.rmapbt = getnum(value, opts, M_RMAPBT);
> break;
> case M_REFLINK:
> - cli->sb_feat.reflink = getnum(value, &mopts, M_REFLINK);
> + cli->sb_feat.reflink = getnum(value, opts, M_REFLINK);
> break;
> default:
> return -EINVAL;
> @@ -1690,20 +1690,20 @@ rtdev_opts_parser(
> {
> switch (subopt) {
> case R_EXTSIZE:
> - cli->rtextsize = getstr(value, &ropts, R_EXTSIZE);
> + cli->rtextsize = getstr(value, opts, R_EXTSIZE);
> break;
> case R_FILE:
> - cli->xi->risfile = getnum(value, &ropts, R_FILE);
> + cli->xi->risfile = getnum(value, opts, R_FILE);
> break;
> case R_NAME:
> case R_DEV:
> - cli->xi->rtname = getstr(value, &ropts, R_NAME);
> + cli->xi->rtname = getstr(value, opts, R_NAME);
> break;
> case R_SIZE:
> - cli->rtsize = getstr(value, &ropts, R_SIZE);
> + cli->rtsize = getstr(value, opts, R_SIZE);
> break;
> case R_NOALIGN:
> - cli->sb_feat.nortalign = getnum(value, &ropts, R_NOALIGN);
> + cli->sb_feat.nortalign = getnum(value, opts, R_NOALIGN);
> break;
> default:
> return -EINVAL;
> @@ -1725,7 +1725,7 @@ sector_opts_parser(
> case S_SECTLOG:
> if (cli->sectorsize)
> conflict('s', opts->subopts, S_SECTSIZE, S_SECTLOG);
> - sectorlog = getnum(value, &sopts, S_SECTLOG);
> + sectorlog = getnum(value, opts, S_SECTLOG);
> cli->sectorsize = 1 << sectorlog;
> cli->lsectorsize = cli->sectorsize;
> break;
> @@ -1733,7 +1733,7 @@ sector_opts_parser(
> case S_SECTSIZE:
> if (cli->sectorsize)
> conflict('s', opts->subopts, S_SECTLOG, S_SECTSIZE);
> - cli->sectorsize = getnum(value, &sopts, S_SECTSIZE);
> + cli->sectorsize = getnum(value, opts, S_SECTSIZE);
> cli->lsectorsize = cli->sectorsize;
> break;
> default:
> --
> 2.15.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-12-20 2:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-18 9:11 [PATCH 0/7] mkfs: various cleanups Dave Chinner
2017-12-18 9:11 ` [PATCH 1/7] mkfs: use opts parameter during option parsing Dave Chinner
2017-12-20 2:47 ` Darrick J. Wong [this message]
2017-12-18 9:11 ` [PATCH 2/7] mkfs: simplify minimum log size calculation Dave Chinner
2017-12-20 3:02 ` Darrick J. Wong
2017-12-18 9:11 ` [PATCH 3/7] mkfs: protofile only needs to be set up once Dave Chinner
2017-12-20 2:48 ` Darrick J. Wong
2017-12-18 9:11 ` [PATCH 4/7] mkfs: support arbitrary conflict specification Dave Chinner
2017-12-20 2:53 ` Darrick J. Wong
2017-12-20 3:52 ` Dave Chinner
2017-12-24 20:45 ` Eric Sandeen
2017-12-28 21:45 ` Eric Sandeen
2017-12-18 9:11 ` [PATCH 5/7] mkfs: convert subopt name,val pairs to enums and declared arrays Dave Chinner
2017-12-20 2:56 ` Darrick J. Wong
2017-12-18 9:11 ` [PATCH 6/7] mkfs: resolve sector size CLI conflicts Dave Chinner
2017-12-20 2:59 ` Darrick J. Wong
2017-12-20 3:56 ` Dave Chinner
2017-12-28 21:36 ` Eric Sandeen
2017-12-18 9:11 ` [PATCH 7/7] mkfs: remove logarithm based CLI options Dave Chinner
2017-12-20 3:01 ` Darrick J. Wong
2017-12-20 4:01 ` Dave Chinner
2017-12-20 5:21 ` Darrick J. Wong
2017-12-28 21:35 ` Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171220024731.GJ12613@magnolia \
--to=darrick.wong@oracle.com \
--cc=david@fromorbit.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).