From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: sandeen@redhat.com
Cc: linux-xfs@vger.kernel.org
Subject: [PATCH 07/27] xfs_scrub: find XFS filesystem geometry
Date: Fri, 5 Jan 2018 19:50:51 -0800 [thread overview]
Message-ID: <20180106035051.GP5602@magnolia> (raw)
In-Reply-To: <151520348769.2027.9860697266310422360.stgit@magnolia>
From: Darrick J. Wong <darrick.wong@oracle.com>
Discover the geometry of the XFS filesystem that we've been told to
scan, and set up some common functions that will be used by the
scrub phases.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
scrub/Makefile | 5 +
scrub/common.c | 72 +++++++++++++++++
scrub/common.h | 10 ++
scrub/disk.c | 3 +
scrub/phase1.c | 223 +++++++++++++++++++++++++++++++++++++++++++++++++++++
scrub/xfs_scrub.c | 35 ++++++++
scrub/xfs_scrub.h | 29 +++++++
7 files changed, 376 insertions(+), 1 deletion(-)
create mode 100644 scrub/phase1.c
diff --git a/scrub/Makefile b/scrub/Makefile
index c3a9986..5239dae 100644
--- a/scrub/Makefile
+++ b/scrub/Makefile
@@ -23,6 +23,7 @@ xfs_scrub.h
CFILES = \
common.c \
disk.c \
+phase1.c \
xfs_scrub.c
LLDLIBS += $(LIBHANDLE) $(LIBFROG) $(LIBPTHREAD)
@@ -33,6 +34,10 @@ ifeq ($(HAVE_MALLINFO),yes)
LCFLAGS += -DHAVE_MALLINFO
endif
+ifeq ($(HAVE_SYNCFS),yes)
+LCFLAGS += -DHAVE_SYNCFS
+endif
+
default: depend $(LTCOMMAND)
include $(BUILDRULES)
diff --git a/scrub/common.c b/scrub/common.c
index 75c6df5..252809d 100644
--- a/scrub/common.c
+++ b/scrub/common.c
@@ -20,8 +20,11 @@
#include <stdio.h>
#include <pthread.h>
#include <stdbool.h>
+#include <sys/statvfs.h>
#include "platform_defs.h"
#include "xfs.h"
+#include "xfs_fs.h"
+#include "path.h"
#include "xfs_scrub.h"
#include "common.h"
@@ -248,3 +251,72 @@ scrub_nproc_workqueue(
x = 0;
return x;
}
+
+/*
+ * Check if the argument is either the device name or mountpoint of a mounted
+ * filesystem.
+ */
+#define MNTTYPE_XFS "xfs"
+static bool
+find_mountpoint_check(
+ struct stat *sb,
+ struct mntent *t)
+{
+ struct stat ms;
+
+ if (S_ISDIR(sb->st_mode)) { /* mount point */
+ if (stat(t->mnt_dir, &ms) < 0)
+ return false;
+ if (sb->st_ino != ms.st_ino)
+ return false;
+ if (sb->st_dev != ms.st_dev)
+ return false;
+ if (strcmp(t->mnt_type, MNTTYPE_XFS) != 0)
+ return NULL;
+ } else { /* device */
+ if (stat(t->mnt_fsname, &ms) < 0)
+ return false;
+ if (sb->st_rdev != ms.st_rdev)
+ return false;
+ if (strcmp(t->mnt_type, MNTTYPE_XFS) != 0)
+ return NULL;
+ /*
+ * Make sure the mountpoint given by mtab is accessible
+ * before using it.
+ */
+ if (stat(t->mnt_dir, &ms) < 0)
+ return false;
+ }
+
+ return true;
+}
+
+/* Check that our alleged mountpoint is in mtab */
+bool
+find_mountpoint(
+ char *mtab,
+ struct scrub_ctx *ctx)
+{
+ struct mntent_cursor cursor;
+ struct mntent *t = NULL;
+ bool found = false;
+
+ if (platform_mntent_open(&cursor, mtab) != 0) {
+ fprintf(stderr, "Error: can't get mntent entries.\n");
+ exit(1);
+ }
+
+ while ((t = platform_mntent_next(&cursor)) != NULL) {
+ /*
+ * Keep jotting down matching mount details; newer mounts are
+ * towards the end of the file (hopefully).
+ */
+ if (find_mountpoint_check(&ctx->mnt_sb, t)) {
+ ctx->mntpoint = strdup(t->mnt_dir);
+ ctx->blkdev = strdup(t->mnt_fsname);
+ found = true;
+ }
+ }
+ platform_mntent_close(&cursor);
+ return found;
+}
diff --git a/scrub/common.h b/scrub/common.h
index 41b3ea7..fed95df 100644
--- a/scrub/common.h
+++ b/scrub/common.h
@@ -62,4 +62,14 @@ double auto_units(unsigned long long number, char **units);
unsigned int scrub_nproc(struct scrub_ctx *ctx);
unsigned int scrub_nproc_workqueue(struct scrub_ctx *ctx);
+#ifndef HAVE_SYNCFS
+static inline int syncfs(int fd)
+{
+ sync();
+ return 0;
+}
+#endif
+
+bool find_mountpoint(char *mtab, struct scrub_ctx *ctx);
+
#endif /* XFS_SCRUB_COMMON_H_ */
diff --git a/scrub/disk.c b/scrub/disk.c
index d4bf81f..546a06c 100644
--- a/scrub/disk.c
+++ b/scrub/disk.c
@@ -31,6 +31,9 @@
#include <linux/fs.h>
#include "platform_defs.h"
#include "libfrog.h"
+#include "xfs.h"
+#include "path.h"
+#include "xfs_fs.h"
#include "xfs_scrub.h"
#include "disk.h"
diff --git a/scrub/phase1.c b/scrub/phase1.c
new file mode 100644
index 0000000..65409d3
--- /dev/null
+++ b/scrub/phase1.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) 2018 Oracle. All Rights Reserved.
+ *
+ * Author: Darrick J. Wong <darrick.wong@oracle.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it would be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+#include <stdio.h>
+#include <mntent.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/statvfs.h>
+#include <sys/vfs.h>
+#include <fcntl.h>
+#include <dirent.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <pthread.h>
+#include <errno.h>
+#include <linux/fs.h>
+#include "libfrog.h"
+#include "workqueue.h"
+#include "input.h"
+#include "path.h"
+#include "handle.h"
+#include "bitops.h"
+#include "xfs_arch.h"
+#include "xfs_format.h"
+#include "avl64.h"
+#include "list.h"
+#include "xfs_scrub.h"
+#include "common.h"
+#include "disk.h"
+
+/* Phase 1: Find filesystem geometry (and clean up after) */
+
+/* Shut down the filesystem. */
+void
+xfs_shutdown_fs(
+ struct scrub_ctx *ctx)
+{
+ int flag;
+
+ flag = XFS_FSOP_GOING_FLAGS_LOGFLUSH;
+ str_info(ctx, ctx->mntpoint, _("Shutting down filesystem!"));
+ if (ioctl(ctx->mnt_fd, XFS_IOC_GOINGDOWN, &flag))
+ str_errno(ctx, ctx->mntpoint);
+}
+
+/* Clean up the XFS-specific state data. */
+bool
+xfs_cleanup_fs(
+ struct scrub_ctx *ctx)
+{
+ if (ctx->fshandle)
+ free_handle(ctx->fshandle, ctx->fshandle_len);
+ if (ctx->rtdev)
+ disk_close(ctx->rtdev);
+ if (ctx->logdev)
+ disk_close(ctx->logdev);
+ if (ctx->datadev)
+ disk_close(ctx->datadev);
+ fshandle_destroy();
+ close(ctx->mnt_fd);
+ fs_table_destroy();
+
+ return true;
+}
+
+/*
+ * Bind to the mountpoint, read the XFS geometry, bind to the block devices.
+ * Anything we've already built will be cleaned up by xfs_cleanup_fs.
+ */
+bool
+xfs_setup_fs(
+ struct scrub_ctx *ctx)
+{
+ struct fs_path *fsp;
+ int error;
+
+ /*
+ * Open the directory with O_NOATIME. For mountpoints owned
+ * by root, this should be sufficient to ensure that we have
+ * CAP_SYS_ADMIN, which we probably need to do anything fancy
+ * with the (XFS driver) kernel.
+ */
+ ctx->mnt_fd = open(ctx->mntpoint, O_RDONLY | O_NOATIME | O_DIRECTORY);
+ if (ctx->mnt_fd < 0) {
+ if (errno == EPERM)
+ str_info(ctx, ctx->mntpoint,
+_("Must be root to run scrub."));
+ else
+ str_errno(ctx, ctx->mntpoint);
+ return false;
+ }
+
+ error = fstat(ctx->mnt_fd, &ctx->mnt_sb);
+ if (error) {
+ str_errno(ctx, ctx->mntpoint);
+ return false;
+ }
+ error = fstatvfs(ctx->mnt_fd, &ctx->mnt_sv);
+ if (error) {
+ str_errno(ctx, ctx->mntpoint);
+ return false;
+ }
+ error = fstatfs(ctx->mnt_fd, &ctx->mnt_sf);
+ if (error) {
+ str_errno(ctx, ctx->mntpoint);
+ return false;
+ }
+
+ ctx->nr_io_threads = nproc;
+ if (verbose) {
+ fprintf(stdout, _("%s: using %d threads to scrub.\n"),
+ ctx->mntpoint, scrub_nproc(ctx));
+ fflush(stdout);
+ }
+
+ if (!platform_test_xfs_fd(ctx->mnt_fd)) {
+ str_error(ctx, ctx->mntpoint,
+_("Does not appear to be an XFS filesystem!"));
+ return false;
+ }
+
+ /*
+ * Flush everything out to disk before we start checking.
+ * This seems to reduce the incidence of stale file handle
+ * errors when we open things by handle.
+ */
+ error = syncfs(ctx->mnt_fd);
+ if (error) {
+ str_errno(ctx, ctx->mntpoint);
+ return false;
+ }
+
+ /* Retrieve XFS geometry. */
+ error = ioctl(ctx->mnt_fd, XFS_IOC_FSGEOMETRY, &ctx->geo);
+ if (error) {
+ str_errno(ctx, ctx->mntpoint);
+ return false;
+ }
+
+ ctx->agblklog = log2_roundup(ctx->geo.agblocks);
+ ctx->blocklog = highbit32(ctx->geo.blocksize);
+ ctx->inodelog = highbit32(ctx->geo.inodesize);
+ ctx->inopblog = ctx->blocklog - ctx->inodelog;
+
+ error = path_to_fshandle(ctx->mntpoint, &ctx->fshandle,
+ &ctx->fshandle_len);
+ if (error) {
+ perror(_("getting fshandle"));
+ return false;
+ }
+
+ /* Go find the XFS devices if we have a usable fsmap. */
+ fs_table_initialise(0, NULL, 0, NULL);
+ errno = 0;
+ fsp = fs_table_lookup(ctx->mntpoint, FS_MOUNT_POINT);
+ if (!fsp) {
+ str_error(ctx, ctx->mntpoint,
+_("Unable to find XFS information."));
+ return false;
+ }
+ memcpy(&ctx->fsinfo, fsp, sizeof(struct fs_path));
+
+ /* Did we find the log and rt devices, if they're present? */
+ if (ctx->geo.logstart == 0 && ctx->fsinfo.fs_log == NULL) {
+ str_error(ctx, ctx->mntpoint,
+_("Unable to find log device path."));
+ return false;
+ }
+ if (ctx->geo.rtblocks && ctx->fsinfo.fs_rt == NULL) {
+ str_error(ctx, ctx->mntpoint,
+_("Unable to find realtime device path."));
+ return false;
+ }
+
+ /* Open the raw devices. */
+ ctx->datadev = disk_open(ctx->fsinfo.fs_name);
+ if (error) {
+ str_errno(ctx, ctx->fsinfo.fs_name);
+ return false;
+ }
+
+ if (ctx->fsinfo.fs_log) {
+ ctx->logdev = disk_open(ctx->fsinfo.fs_log);
+ if (error) {
+ str_errno(ctx, ctx->fsinfo.fs_name);
+ return false;
+ }
+ }
+ if (ctx->fsinfo.fs_rt) {
+ ctx->rtdev = disk_open(ctx->fsinfo.fs_rt);
+ if (error) {
+ str_errno(ctx, ctx->fsinfo.fs_name);
+ return false;
+ }
+ }
+
+ /*
+ * Everything's set up, which means any failures recorded after
+ * this point are most probably corruption errors (as opposed to
+ * purely setup errors).
+ */
+ ctx->need_repair = true;
+ return true;
+}
diff --git a/scrub/xfs_scrub.c b/scrub/xfs_scrub.c
index a9c185b..a733b8f 100644
--- a/scrub/xfs_scrub.c
+++ b/scrub/xfs_scrub.c
@@ -23,9 +23,12 @@
#include <stdlib.h>
#include <sys/time.h>
#include <sys/resource.h>
+#include <sys/statvfs.h>
#include "platform_defs.h"
#include "xfs.h"
+#include "xfs_fs.h"
#include "input.h"
+#include "path.h"
#include "xfs_scrub.h"
#include "common.h"
@@ -345,6 +348,8 @@ run_scrub_phases(
{
{
.descr = _("Find filesystem geometry."),
+ .fn = xfs_setup_fs,
+ .must_run = true,
},
{
.descr = _("Check internal metadata."),
@@ -426,6 +431,7 @@ main(
struct phase_rusage all_pi;
unsigned long long total_errors;
bool moveon = true;
+ bool ismnt;
static bool injected;
int ret = 0;
@@ -522,6 +528,15 @@ _("Only one of the options -n or -y may be specified.\n"));
ctx.mntpoint = strdup(argv[optind]);
+ /* Find the mount record for the passed-in argument. */
+ if (stat(argv[optind], &ctx.mnt_sb) < 0) {
+ fprintf(stderr,
+ _("%s: could not stat: %s: %s\n"),
+ progname, argv[optind], strerror(errno));
+ ret |= 8;
+ goto out;
+ }
+
/*
* If the user did not specify an explicit mount table, try to use
* /proc/mounts if it is available, else /etc/mtab. We prefer
@@ -541,6 +556,15 @@ _("Only one of the options -n or -y may be specified.\n"));
if (!moveon)
goto out;
+ ismnt = find_mountpoint(mtab, &ctx);
+ if (!ismnt) {
+ fprintf(stderr,
+_("%s: Not a XFS mount point or block device.\n"),
+ ctx.mntpoint);
+ ret |= 8;
+ goto out;
+ }
+
/* How many CPUs? */
nproc = sysconf(_SC_NPROCESSORS_ONLN);
if (nproc < 1)
@@ -569,6 +593,11 @@ _("Only one of the options -n or -y may be specified.\n"));
if (debug_tweak_on("XFS_SCRUB_FORCE_ERROR"))
str_error(&ctx, ctx.mntpoint, _("Injecting error."));
+ /* Clean up scan data. */
+ moveon = xfs_cleanup_fs(&ctx);
+ if (!moveon)
+ ret |= 8;
+
out:
total_errors = ctx.errors_found + ctx.runtime_errors;
if (ctx.need_repair)
@@ -586,13 +615,17 @@ _("%s: %llu errors found.%s\n"),
fprintf(stderr,
_("%s: %llu warnings found.\n"),
ctx.mntpoint, ctx.warnings_found);
- if (ctx.errors_found)
+ if (ctx.errors_found) {
+ if (ctx.error_action == ERRORS_SHUTDOWN)
+ xfs_shutdown_fs(&ctx);
ret |= 1;
+ }
if (ctx.warnings_found)
ret |= 2;
if (ctx.runtime_errors)
ret |= 4;
phase_end(&all_pi, 0);
+ free(ctx.blkdev);
free(ctx.mntpoint);
return ret;
diff --git a/scrub/xfs_scrub.h b/scrub/xfs_scrub.h
index 7f1dcb1..2be7c65 100644
--- a/scrub/xfs_scrub.h
+++ b/scrub/xfs_scrub.h
@@ -51,15 +51,38 @@ struct scrub_ctx {
char *mntpoint;
char *blkdev;
+ /* Mountpoint info */
+ struct stat mnt_sb;
+ struct statvfs mnt_sv;
+ struct statfs mnt_sf;
+
+ /* Open block devices */
+ struct disk *datadev;
+ struct disk *logdev;
+ struct disk *rtdev;
+
/* What does the user want us to do? */
enum scrub_mode mode;
/* How does the user want us to react to errors? */
enum error_action error_action;
+ /* fd to filesystem mount point */
+ int mnt_fd;
+
/* Number of threads for metadata scrubbing */
unsigned int nr_io_threads;
+ /* XFS specific geometry */
+ struct xfs_fsop_geom geo;
+ struct fs_path fsinfo;
+ unsigned int agblklog;
+ unsigned int blocklog;
+ unsigned int inodelog;
+ unsigned int inopblog;
+ void *fshandle;
+ size_t fshandle_len;
+
/* Mutable scrub state; use lock. */
pthread_mutex_t lock;
unsigned long long max_errors;
@@ -67,6 +90,12 @@ struct scrub_ctx {
unsigned long long errors_found;
unsigned long long warnings_found;
bool need_repair;
+ bool preen_triggers[XFS_SCRUB_TYPE_NR];
};
+/* Phase helper functions */
+void xfs_shutdown_fs(struct scrub_ctx *ctx);
+bool xfs_cleanup_fs(struct scrub_ctx *ctx);
+bool xfs_setup_fs(struct scrub_ctx *ctx);
+
#endif /* XFS_SCRUB_XFS_SCRUB_H_ */
next prev parent reply other threads:[~2018-01-06 3:50 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-06 1:51 [PATCH v11 00/27] xfsprogs: online scrub/repair support Darrick J. Wong
2018-01-06 1:51 ` [PATCH 01/27] xfs_scrub: create online filesystem scrub program Darrick J. Wong
2018-01-12 0:16 ` Eric Sandeen
2018-01-12 1:08 ` Darrick J. Wong
2018-01-12 1:07 ` Eric Sandeen
2018-01-12 1:10 ` Darrick J. Wong
2018-01-06 1:51 ` [PATCH 02/27] xfs_scrub: common error handling Darrick J. Wong
2018-01-12 1:15 ` Eric Sandeen
2018-01-12 1:23 ` Darrick J. Wong
2018-01-06 1:51 ` [PATCH 03/27] xfs_scrub: set up command line argument parsing Darrick J. Wong
2018-01-11 23:39 ` Eric Sandeen
2018-01-12 1:53 ` Darrick J. Wong
2018-01-12 1:30 ` Eric Sandeen
2018-01-12 2:03 ` Darrick J. Wong
2018-01-06 1:51 ` [PATCH 04/27] xfs_scrub: dispatch the various phases of the scrub program Darrick J. Wong
2018-01-06 1:51 ` [PATCH 05/27] xfs_scrub: figure out how many threads we're going to need Darrick J. Wong
2018-01-06 1:52 ` [PATCH 06/27] xfs_scrub: create an abstraction for a block device Darrick J. Wong
2018-01-11 23:24 ` Eric Sandeen
2018-01-11 23:59 ` Darrick J. Wong
2018-01-12 0:04 ` Eric Sandeen
2018-01-12 1:27 ` Darrick J. Wong
2018-01-06 1:52 ` [PATCH 07/27] xfs_scrub: find XFS filesystem geometry Darrick J. Wong
2018-01-06 1:52 ` [PATCH 08/27] xfs_scrub: add inode iteration functions Darrick J. Wong
2018-01-06 1:52 ` [PATCH 09/27] xfs_scrub: add space map " Darrick J. Wong
2018-01-06 1:52 ` [PATCH 10/27] xfs_scrub: add file " Darrick J. Wong
2018-01-11 23:19 ` Eric Sandeen
2018-01-12 0:24 ` Darrick J. Wong
2018-01-06 1:52 ` [PATCH 11/27] xfs_scrub: filesystem counter collection functions Darrick J. Wong
2018-01-06 1:52 ` [PATCH 12/27] xfs_scrub: wrap the scrub ioctl Darrick J. Wong
2018-01-11 23:12 ` Eric Sandeen
2018-01-12 0:28 ` Darrick J. Wong
2018-01-06 1:52 ` [PATCH 13/27] xfs_scrub: scan filesystem and AG metadata Darrick J. Wong
2018-01-06 1:52 ` [PATCH 14/27] xfs_scrub: thread-safe stats counter Darrick J. Wong
2018-01-06 1:53 ` [PATCH 15/27] xfs_scrub: scan inodes Darrick J. Wong
2018-01-06 1:53 ` [PATCH 16/27] xfs_scrub: check directory connectivity Darrick J. Wong
2018-01-06 1:53 ` [PATCH 17/27] xfs_scrub: warn about suspicious characters in directory/xattr names Darrick J. Wong
2018-01-06 1:53 ` [PATCH 18/27] xfs_scrub: warn about normalized Unicode name collisions Darrick J. Wong
2018-01-16 23:52 ` Eric Sandeen
2018-01-16 23:57 ` Eric Sandeen
2018-01-16 23:59 ` Darrick J. Wong
2018-01-06 1:53 ` [PATCH 19/27] xfs_scrub: create a bitmap data structure Darrick J. Wong
2018-01-06 1:53 ` [PATCH 20/27] xfs_scrub: create infrastructure to read verify data blocks Darrick J. Wong
2018-01-06 1:53 ` [PATCH 21/27] xfs_scrub: scrub file " Darrick J. Wong
2018-01-11 23:25 ` Eric Sandeen
2018-01-12 0:29 ` Darrick J. Wong
2018-01-06 1:53 ` [PATCH 22/27] xfs_scrub: optionally use SCSI READ VERIFY commands to scrub data blocks on disk Darrick J. Wong
2018-01-06 1:53 ` [PATCH 23/27] xfs_scrub: check summary counters Darrick J. Wong
2018-01-06 1:54 ` [PATCH 24/27] xfs_scrub: fstrim the free areas if there are no errors on the filesystem Darrick J. Wong
2018-01-16 22:07 ` Eric Sandeen
2018-01-16 22:23 ` Darrick J. Wong
2018-01-06 1:54 ` [PATCH 25/27] xfs_scrub: progress indicator Darrick J. Wong
2018-01-11 23:27 ` Eric Sandeen
2018-01-12 0:32 ` Darrick J. Wong
2018-01-06 1:54 ` [PATCH 26/27] xfs_scrub: create a script to scrub all xfs filesystems Darrick J. Wong
2018-01-06 1:54 ` [PATCH 27/27] xfs_scrub: integrate services with systemd Darrick J. Wong
2018-01-06 3:50 ` Darrick J. Wong [this message]
2018-01-12 4:17 ` [PATCH v11 00/27] xfsprogs: online scrub/repair support Eric Sandeen
2018-01-17 1:31 ` Darrick J. Wong
2018-01-16 19:21 ` [PATCH 28/27] xfs_scrub: wire up repair ioctl Darrick J. Wong
2018-01-16 19:21 ` [PATCH 29/27] xfs_scrub: schedule and manage repairs to the filesystem Darrick J. Wong
-- strict thread matches above, loose matches on Subject: below --
2017-11-17 21:00 [PATCH v10 00/27] xfsprogs-4.15: online scrub/repair support Darrick J. Wong
2017-11-17 21:00 ` [PATCH 07/27] xfs_scrub: find XFS filesystem geometry Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180106035051.GP5602@magnolia \
--to=darrick.wong@oracle.com \
--cc=linux-xfs@vger.kernel.org \
--cc=sandeen@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).