From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: Eryu Guan <guaneryu@gmail.com>
Cc: linux-xfs@vger.kernel.org, fstests@vger.kernel.org
Subject: Re: [PATCH 6/6] xfs: make sure pretty printed geometry output matches
Date: Thu, 7 Jun 2018 08:13:50 -0700 [thread overview]
Message-ID: <20180607151350.GH25007@magnolia> (raw)
In-Reply-To: <20180607124853.GC1103@desktop>
On Thu, Jun 07, 2018 at 08:48:53PM +0800, Eryu Guan wrote:
> On Tue, Jun 05, 2018 at 09:43:33AM -0700, Darrick J. Wong wrote:
> > From: Darrick J. Wong <darrick.wong@oracle.com>
> >
> > Make sure that all of our commands that can print geometry information
> > all print the /same/ information.
> >
> > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> > ---
> > common/xfs | 41 +++++++++++++++++++++++++
> > tests/xfs/710 | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> > tests/xfs/710.out | 2 +
> > tests/xfs/group | 1 +
> > 4 files changed, 132 insertions(+)
> > create mode 100755 tests/xfs/710
> > create mode 100644 tests/xfs/710.out
> >
> >
> > diff --git a/common/xfs b/common/xfs
> > index 3e34b118..bc35cd87 100644
> > --- a/common/xfs
> > +++ b/common/xfs
> > @@ -710,3 +710,44 @@ _require_xfs_db_write_array()
> > rm -f $TEST_DIR/$seq.img
> > [ $supported -eq 0 ] && _notrun "xfs_db write can't support array"
> > }
> > +
> > +_require_xfs_spaceman_command()
> > +{
> > + if [ -z "$1" ]
> > + then
> > + echo "Usage: _require_xfs_spaceman_command command [switch]" 1>&2
> > + exit 1
> > + fi
> > + local command=$1
> > + shift
> > + local param="$*"
> > + local param_checked=0
> > + local opts=""
> > +
> > + _require_command "$XFS_SPACEMAN_PROG" "xfs_spaceman"
> > +
> > + testfile=$TEST_DIR/$$.xfs_spaceman
> > + case $command in
> > + *)
> > + testio=`$XFS_SPACEMAN_PROG -c "help $command" $TEST_DIR 2>&1`
> > + esac
> > +
> > + rm -f $testfile 2>&1 > /dev/null
> > + echo $testio | grep -q "not found" && \
> > + _notrun "xfs_spaceman $command support is missing"
> > + echo $testio | grep -q "Operation not supported" && \
> > + _notrun "xfs_spaceman $command failed (old kernel/wrong fs?)"
> > + echo $testio | grep -q "Invalid" && \
> > + _notrun "xfs_spaceman $command failed (old kernel/wrong fs/bad args?)"
> > + echo $testio | grep -q "foreign file active" && \
> > + _notrun "xfs_spaceman $command not supported on $FSTYP"
> > + echo $testio | grep -q "Function not implemented" && \
> > + _notrun "xfs_spaceman $command support is missing (missing syscall?)"
> > +
> > + [ -n "$param" ] || return
> > +
> > + if [ $param_checked -eq 0 ]; then
> > + $XFS_IO_PROG -c "help $command" | grep -q "^ $param --" || \
> ^^^^^^^^^^^ XFS_SPACEMAN_PROG
>
> > + _notrun "xfs_spaceman $command doesn't support $param"
> > + fi
> > +}
> > diff --git a/tests/xfs/710 b/tests/xfs/710
> > new file mode 100755
> > index 00000000..b03d4836
> > --- /dev/null
> > +++ b/tests/xfs/710
> > @@ -0,0 +1,88 @@
> > +#! /bin/bash
> > +# FS QA Test No. 710
> > +#
> > +# Make sure pretty printed XFS geometry is the same across all programs.
> > +#
> > +#-----------------------------------------------------------------------
> > +# Copyright (c) 2018 Oracle, Inc.
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation.
> > +#
> > +# This program is distributed in the hope that it would be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write the Free Software Foundation,
> > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> > +#
> > +#-----------------------------------------------------------------------
> > +#
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1
> > +trap "_cleanup; rm -f $tmp.*; exit \$status" 0 1 2 3 15
>
> "rm -f $tmp.*" is done in _cleanup()
>
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.*
> > +}
> > +
> > +rm -f $seqres.full
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/xfs
>
> No need to source common/xfs, common/rc will source it automatically.
>
> > +
> > +# real QA test starts here
> > +_supported_fs xfs
> > +_supported_os Linux
> > +
> > +_require_scratch_nocheck
> > +
> > +# Geometry printing wasn't unified until xfs_spaceman grew an 'info'
> > +# command, so skip this test if there is no spaceman or it doesn't
> > +# know what 'info' is.
> > +_require_xfs_spaceman_command "info"
> > +_require_command "$XFS_DB_PROG" xfs_db
> > +_require_command "$XFS_GROWFS_PROG" xfs_growfs
> > +_require_command "$XFS_INFO_PROG" xfs_info
>
> xfs_db and xfs_info (I fixed that up on commit) have been checked in
> common/rc, just need to check xfs_growfs here.
>
> These are all trivial and easy to fix, I'll just fix them on commit too.
Ok, thank you!
--D
>
> Thanks,
> Eryu
>
> > +
> > +_scratch_mkfs > $tmp.mkfs
> > +echo MKFS >> $seqres.full
> > +cat $tmp.mkfs >> $seqres.full
> > +
> > +_scratch_xfs_db -c "info" > $tmp.dbinfo
> > +echo DB >> $seqres.full
> > +cat $tmp.dbinfo >> $seqres.full
> > +diff -u $tmp.mkfs $tmp.dbinfo
> > +
> > +_scratch_mount
> > +
> > +$XFS_SPACEMAN_PROG -c "info" $SCRATCH_MNT > $tmp.spaceman
> > +echo SPACEMAN >> $seqres.full
> > +cat $tmp.spaceman >> $seqres.full
> > +diff -u $tmp.mkfs $tmp.spaceman
> > +
> > +$XFS_GROWFS_PROG -n $SCRATCH_MNT > $tmp.growfs
> > +echo GROWFS >> $seqres.full
> > +cat $tmp.growfs >> $seqres.full
> > +diff -u $tmp.mkfs $tmp.growfs
> > +
> > +$XFS_INFO_PROG $SCRATCH_MNT > $tmp.info
> > +echo INFO >> $seqres.full
> > +cat $tmp.info >> $seqres.full
> > +diff -u $tmp.mkfs $tmp.info
> > +
> > +echo "Silence is golden."
> > +status=0
> > +exit 0
> > diff --git a/tests/xfs/710.out b/tests/xfs/710.out
> > new file mode 100644
> > index 00000000..ae2659d5
> > --- /dev/null
> > +++ b/tests/xfs/710.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 710
> > +Silence is golden.
> > diff --git a/tests/xfs/group b/tests/xfs/group
> > index 2319f58f..9dd30ae0 100644
> > --- a/tests/xfs/group
> > +++ b/tests/xfs/group
> > @@ -445,3 +445,4 @@
> > 445 auto quick filestreams
> > 446 auto quick
> > 447 auto mount
> > +710 auto quick
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2018-06-07 15:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-05 16:42 [PATCH 0/6] fstests: fixes and new tests Darrick J. Wong
2018-06-05 16:42 ` [PATCH 1/6] xfs/439: don't check filesystem afterwards Darrick J. Wong
2018-06-05 16:43 ` [PATCH 2/6] xfs/122: fix sb_fname[XFSLABEL_MAX] in test Darrick J. Wong
2018-06-05 16:43 ` [PATCH 3/6] xfs/310: fix _require_scratch_nocheck ordering Darrick J. Wong
2018-06-05 16:43 ` [PATCH 4/6] generic: test swapfile creation, activation, and deactivation Darrick J. Wong
2018-06-07 12:34 ` Eryu Guan
2018-06-07 15:01 ` Darrick J. Wong
2018-06-07 15:17 ` [PATCH v2 " Darrick J. Wong
2018-06-05 16:43 ` [PATCH 5/6] xfs: abstract xfs_info into $XFS_INFO_PROG Darrick J. Wong
2018-06-07 11:37 ` Eryu Guan
2018-06-07 15:03 ` Darrick J. Wong
2018-06-05 16:43 ` [PATCH 6/6] xfs: make sure pretty printed geometry output matches Darrick J. Wong
2018-06-07 12:48 ` Eryu Guan
2018-06-07 15:13 ` Darrick J. Wong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180607151350.GH25007@magnolia \
--to=darrick.wong@oracle.com \
--cc=fstests@vger.kernel.org \
--cc=guaneryu@gmail.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox