linux-xfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brian Foster <bfoster@redhat.com>
To: Dave Chinner <david@fromorbit.com>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [PATCH 1/7] xfs: zero length symlinks are not valid
Date: Wed, 21 Nov 2018 07:01:43 -0500	[thread overview]
Message-ID: <20181121120142.GA57715@bfoster> (raw)
In-Reply-To: <20181120211918.GR19305@dastard>

On Wed, Nov 21, 2018 at 08:19:18AM +1100, Dave Chinner wrote:
> On Tue, Nov 20, 2018 at 08:44:39AM -0500, Brian Foster wrote:
> > On Tue, Nov 20, 2018 at 08:04:53AM +1100, Dave Chinner wrote:
> > > From: Dave Chinner <dchinner@redhat.com>
> > > 
> > > A log recovery failure has been reproduced where a symlink inode has
> > > a zero length in extent form. It was caused by a shutdown during a
> > > combined fstress+fsmark workload.
> > > 
> > > The underlying problem is the issue in xfs_inactive_symlink(): the
> > > inode is unlocked between the symlink inactivation/truncation and
> > > the inode being freed. This opens a window for the inode to be
> > > written to disk before it xfs_ifree() removes it from the unlinked
> > > list, marks it free in the inobt and zeros the mode.
> > > 
> > > For shortform inodes, the fix is simple. xfs_ifree() clears the data
> > > fork state, so there's no need to do it in xfs_inactive_symlink().
> > > This means the shortform fork verifier will not see a zero length
> > > data fork as it mirrors the inode size through to xfs_ifree()), and
> > > hence if the inode gets written back and the fork verifiers are run
> > > they will still see a fork that matches the on-disk inode size.
> > > 
> > > For extent form (remote) symlinks, it is a little more tricky. Here
> > > we explicitly set the inode size to zero, so the above race can lead
> > > to zero length symlinks on disk. Because the inode is unlinked at
> > > this point (i.e. on the unlinked list) and unreferenced, it can
> > > never be seen again by a user. Hence when we set the inode size to
> > > zeor, also change the type to S_IFREG. xfs_ifree() expects S_IFREG
> > > inodes to be of zero length, and so this avoids all the problems of
> > > zero length symlinks ever hitting the disk. It also avoids the
> > > problem of needing to handle zero length symlink inodes in log
> > > recovery to replay the extent free intents and the remaining
> > > deferops to free the extents the symlink used.
> > > 
> > > Also add a couple of asserts to warn us if zero length symlinks end
> > > up in either the symlink create or inactivation paths.
> > > 
> > > Signed-off-by: Dave Chinner <dchinner@redhat.com>
> > > ---
> > 
> > Hmm, I saw this and thought this was something we had already fixed.
> > Looking back, I see this was actually posted[1] months ago and there was
> > a fairly nuanced discussion. On a quick skim, that appears to have
> > concluded with the patch being mostly sane, but requiring a couple minor
> > tweaks and commit log updates. This patch looks exactly the same to me,
> > however. Hm?
> 
> Hmmm, I did all that, months ago. The code barely changed, it was
> all just commit message updates. maybe I picked up the wrong version
> of the patch - it had been sitting around for a while. I had even
> gone back and checked the discussion before concluding that "it 
> doesn't need code changes" before adding it to this stack...
> 
> I'll go back and see if I can find a more recent version...
> 

It was mostly commit log changes except for an
s/xfs_difree()/xfs_ifree()/ needed in the code comment. IIRC, there was
additional context worth describing for log recovery in the commit log.

Brian

> Cheers,
> 
> Dave.
> -- 
> Dave Chinner
> david@fromorbit.com

  reply	other threads:[~2018-11-21 22:35 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-19 21:04 [PATCH 0/7] xfs: various fixes for 4.20 Dave Chinner
2018-11-19 21:04 ` [PATCH 1/7] xfs: zero length symlinks are not valid Dave Chinner
2018-11-20  8:12   ` Christoph Hellwig
2018-11-20 13:44   ` Brian Foster
2018-11-20 21:19     ` Dave Chinner
2018-11-21 12:01       ` Brian Foster [this message]
2018-11-19 21:04 ` [PATCH 2/7] xfs: uncached buffer tracing needs to print bno Dave Chinner
2018-11-20  8:12   ` Christoph Hellwig
2018-11-20 22:46   ` Darrick J. Wong
2018-11-19 21:04 ` [PATCH 3/7] xfs: fix transient reference count error in xfs_buf_resubmit_failed_buffers Dave Chinner
2018-11-20  8:13   ` Christoph Hellwig
2018-11-20 22:48   ` Darrick J. Wong
2018-11-19 21:04 ` [PATCH 4/7] xfs: finobt AG reserves don't consider last AG can be a runt Dave Chinner
2018-11-20  8:14   ` Christoph Hellwig
2018-11-20 22:49   ` Darrick J. Wong
2018-11-19 21:04 ` [PATCH 5/7] xfs: extent shifting doesn't fully invalidate page cache Dave Chinner
2018-11-20  8:18   ` Christoph Hellwig
2018-11-20 22:53   ` Darrick J. Wong
2018-11-19 21:04 ` [PATCH 6/7] xfs: don't ENOSPC on writeback when punching holes Dave Chinner
2018-11-20  8:20   ` Christoph Hellwig
2018-11-20  9:50     ` Dave Chinner
2018-11-20 16:28       ` Christoph Hellwig
2018-11-20 21:00         ` Dave Chinner
2018-11-21 18:09   ` Darrick J. Wong
2018-11-22  2:31     ` Dave Chinner
2018-11-19 21:04 ` [PATCH 7/7] xfs: flush removing page cache in xfs_reflink_remap_prep Dave Chinner
2018-11-20  8:32   ` Christoph Hellwig
2018-11-20 22:56   ` Darrick J. Wong
2018-11-20  6:36 ` [PATCH 8/7] xfs: delalloc -> unwritten COW fork allocation can go wrong Dave Chinner
2018-11-20 13:45   ` Brian Foster
2018-11-20 16:33     ` Christoph Hellwig
2018-11-20 21:08       ` Dave Chinner
2018-11-20 16:32   ` Christoph Hellwig
2018-11-20 22:58   ` Darrick J. Wong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181121120142.GA57715@bfoster \
    --to=bfoster@redhat.com \
    --cc=david@fromorbit.com \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).