From: Brian Foster <bfoster@redhat.com>
To: Nick Bowler <nbowler@draconx.ca>
Cc: linux-xfs@vger.kernel.org
Subject: Re: Enlarging w/ xfs_growfs: XFS_IOC_FSGROWFSDATA xfsctl failed: Inappropriate ioctl for device
Date: Mon, 10 Dec 2018 11:11:22 -0500 [thread overview]
Message-ID: <20181210161121.GC8356@bfoster> (raw)
In-Reply-To: <CADyTPEw_RZCC2yodbJ6W0e9mwJgQW19UXCHhcw1-tF4b0=hMjg@mail.gmail.com>
On Mon, Dec 10, 2018 at 10:39:14AM -0500, Nick Bowler wrote:
> Hi Brian,
>
> On 12/10/18, Brian Foster <bfoster@redhat.com> wrote:
> > The only thing that comes to mind while poking through the code is
> > perhaps xfsprogs is sending the traditional XFS_IOC_GROWFSDATA command
> > into the compat_ioctl() path somehow or another (assuming
> > BROKEN_X86_ALIGNMENT is set).
> >
> > What arch is your kernel/xfsprogs?
>
> This system is running an amd64 kernel with x32 userspace (including
> xfsprogs).
>
Ok, so I think that means BROKEN_X86_ALIGNMENT should be set since XFS
defines it as:
#if defined(CONFIG_IA64) || defined(CONFIG_X86_64)
#define BROKEN_X86_ALIGNMENT
...
> > What does 'cat /sys/kernel/debug/trace/trace' show if you run
> > 'trace-cmd start -e xfs:xfs_file*ioctl*' and then attempt the growfs?
>
> Looks like I don't have the required tracing enabled in my kernel
> configuration, but I can build a new one if needed. Is CONFIG_FTRACE
> sufficient for this?
>
Not sure. I think you need to have CONFIG_TRACING enabled, which may
require FTRACE and/or some other options. Hmm, perhaps you'd be covered
if you make sure you have CONFIG_DYNAMIC_FTRACE enabled.
>From your strace output:
ioctl(3, _IOC(_IOC_WRITE, 0x58, 0x6e, 0x10), 0xffcc9a80) = -1 ENOTTY (Inappropriate ioctl for device)
0x6e corresponds to the GROWFSDATA[_32] cmd and I think 0x10 is the
size, which is 16 bytes as opposed to the 12 bytes expected for
GROWFSDATA_32 for struct compat_xfs_growfs_data:
typedef struct compat_xfs_growfs_data {
__u64 newblocks; /* new data subvol size, fsblocks */
__u32 imaxpct; /* new inode space percentage limit */
} __attribute__((packed)) compat_xfs_growfs_data_t;
On a 64-bit kernel, that packed attribute is the difference between
expecting a padded 16 byte struct vs. a 12 byte version presumably from
a 32-bit application. So if you are calling into the ->compat_ioctl()
path I think the question is why is your xfsprogs sending the 16 byte
structure?
Brian
> Thanks,
> Nick
next prev parent reply other threads:[~2018-12-10 16:11 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-10 4:29 Enlarging w/ xfs_growfs: XFS_IOC_FSGROWFSDATA xfsctl failed: Inappropriate ioctl for device Nick Bowler
2018-12-10 14:33 ` Brian Foster
2018-12-10 15:39 ` Nick Bowler
2018-12-10 16:11 ` Brian Foster [this message]
2018-12-10 16:50 ` Darrick J. Wong
2018-12-10 16:55 ` Darrick J. Wong
2018-12-10 17:46 ` Brian Foster
2018-12-10 20:54 ` Nick Bowler
2018-12-10 21:41 ` Dave Chinner
2018-12-11 7:04 ` Nick Bowler
2018-12-11 12:27 ` Brian Foster
2018-12-11 20:13 ` Nick Bowler
2018-12-11 20:20 ` Nick Bowler
2018-12-12 13:09 ` Brian Foster
2018-12-13 0:21 ` Nick Bowler
2018-12-12 4:56 ` Nick Bowler
2018-12-13 3:53 ` Dave Chinner
2018-12-13 4:14 ` Nick Bowler
2018-12-13 4:49 ` Nick Bowler
2018-12-13 21:39 ` Dave Chinner
2018-12-13 21:53 ` Nick Bowler
2018-12-14 1:43 ` Dave Chinner
2018-12-14 3:35 ` Nick Bowler
2018-12-14 3:40 ` [RFC PATCH xfstests] xfs: add tests to validate ioctl structure layout Nick Bowler
2019-01-15 15:55 ` Luis Chamberlain
2018-12-13 16:30 ` Enlarging w/ xfs_growfs: XFS_IOC_FSGROWFSDATA xfsctl failed: Inappropriate ioctl for device Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181210161121.GC8356@bfoster \
--to=bfoster@redhat.com \
--cc=linux-xfs@vger.kernel.org \
--cc=nbowler@draconx.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox