From: Brian Foster <bfoster@redhat.com>
To: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [PATCH v2 0/7] xfs: fix [f]inobt magic value verification
Date: Thu, 31 Jan 2019 13:03:59 -0500 [thread overview]
Message-ID: <20190131180358.GA36239@bfoster> (raw)
In-Reply-To: <20190131175404.GC5761@magnolia>
On Thu, Jan 31, 2019 at 09:54:04AM -0800, Darrick J. Wong wrote:
> On Thu, Jan 31, 2019 at 10:46:01AM -0500, Brian Foster wrote:
> > Hi all,
> >
> > Here's v2 of the verifier magic value cleanup. This is generally the
> > same idea as the previous version. The primary difference is that v2
> > first converts verifiers that use cpu order magic comparisons to use
> > on-disk (big endian) order and then stores/compares the verifier magic
> > values in on-disk order. The purpose of this change is to reduce the
> > number of byte swaps required at runtime for verifier magic value
> > checks. Further changes include some cleanups, additional refactoring
> > and the inclusion of Darrick's scrub ->b_ops fix with some modifications
> > from the original version.
> >
> > This survives fstests on v4 and v5 filesystems on both little and big
> > endian systems without regressions. Thoughts, reviews, flames
> > appreciated.
>
> One thing I was expecting to see but didn't -- are you going to convert
> the bnobt/cntbt verifiers so that we have tree-specific magic number
> checking?
>
I originally skipped over that one because the hardcoded checks looked
convoluted. Looking again, we probably should include it simply because
it's a similar shared verifier case as for the inobt vs. finobt. We
might still have to keep around a couple hardcoded magic checks for the
pagf_levels thing, but I'll look into it and tack on a new patch for
xfs_allocbt_buf_ops.
Brian
> --D
>
> > Brian
> >
> > v2:
> > - Include djwong's ->b_ops patch w/ modifications.
> > - Added patch to fix up existing cpu endian magic checks, fold in typo
> > fix.
> > - Replace static inline magic verifier helper with out of line variant,
> > kill macro.
> > - Store on-disk byte order magics in ->b_ops.
> > - Added patch to refactor common xfs_da3_blkinfo checks.
> > v1: https://marc.info/?l=linux-xfs&m=154878684317178&w=2
> > - Remove endian conversion from helper.
> > - Drop finobt bad magic mitigation patch.
> > - Additional verifier magic fixups.
> > - Add verifier name typo fixup.
> > rfcv2: https://marc.info/?l=linux-xfs&m=154868884311668&w=2
> > - Split off finobt verifier into separate patch, assign it
> > appropriately.
> > - Created helpers for xfs_buf_ops magic value verification.
> > - Added error mitigation patch for problematic finobt blocks.
> > rfcv1: https://marc.info/?l=linux-xfs&m=154834528212262&w=2
> >
> > Brian Foster (6):
> > xfs: always check magic values in on-disk byte order
> > xfs: create a separate finobt verifier
> > xfs: distinguish between inobt and finobt magic values
> > xfs: use verifier magic field in dir2 leaf verifiers
> > xfs: miscellaneous verifier magic value fixups
> > xfs: factor xfs_da3_blkinfo verification into common helper
> >
> > Darrick J. Wong (1):
> > xfs: set buffer ops when repair probes for btree type
> >
> > fs/xfs/libxfs/xfs_ag.c | 2 +-
> > fs/xfs/libxfs/xfs_alloc.c | 12 ++--
> > fs/xfs/libxfs/xfs_attr_leaf.c | 21 ++----
> > fs/xfs/libxfs/xfs_attr_remote.c | 8 ++-
> > fs/xfs/libxfs/xfs_bmap_btree.c | 13 ++--
> > fs/xfs/libxfs/xfs_da_btree.c | 50 ++++++++++-----
> > fs/xfs/libxfs/xfs_da_format.h | 2 +
> > fs/xfs/libxfs/xfs_dir2_block.c | 10 +--
> > fs/xfs/libxfs/xfs_dir2_data.c | 12 ++--
> > fs/xfs/libxfs/xfs_dir2_leaf.c | 100 ++++++-----------------------
> > fs/xfs/libxfs/xfs_dir2_node.c | 11 ++--
> > fs/xfs/libxfs/xfs_ialloc.c | 3 +-
> > fs/xfs/libxfs/xfs_ialloc_btree.c | 25 +++++---
> > fs/xfs/libxfs/xfs_inode_buf.c | 2 +-
> > fs/xfs/libxfs/xfs_refcount_btree.c | 3 +-
> > fs/xfs/libxfs/xfs_rmap_btree.c | 3 +-
> > fs/xfs/libxfs/xfs_sb.c | 5 +-
> > fs/xfs/libxfs/xfs_shared.h | 1 +
> > fs/xfs/libxfs/xfs_symlink_remote.c | 3 +-
> > fs/xfs/scrub/agheader_repair.c | 2 +-
> > fs/xfs/scrub/repair.c | 11 +++-
> > fs/xfs/xfs_buf.c | 41 ++++++++++--
> > fs/xfs/xfs_buf.h | 4 +-
> > fs/xfs/xfs_log_recover.c | 6 +-
> > fs/xfs/xfs_trans_buf.c | 2 +-
> > 25 files changed, 183 insertions(+), 169 deletions(-)
> >
> > --
> > 2.17.2
> >
prev parent reply other threads:[~2019-01-31 18:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-31 15:46 [PATCH v2 0/7] xfs: fix [f]inobt magic value verification Brian Foster
2019-01-31 15:46 ` [PATCH v2 1/7] xfs: set buffer ops when repair probes for btree type Brian Foster
2019-01-31 15:46 ` [PATCH v2 2/7] xfs: always check magic values in on-disk byte order Brian Foster
2019-01-31 15:46 ` [PATCH v2 3/7] xfs: create a separate finobt verifier Brian Foster
2019-01-31 15:46 ` [PATCH v2 4/7] xfs: distinguish between inobt and finobt magic values Brian Foster
2019-01-31 15:46 ` [PATCH v2 5/7] xfs: use verifier magic field in dir2 leaf verifiers Brian Foster
2019-01-31 15:46 ` [PATCH v2 6/7] xfs: miscellaneous verifier magic value fixups Brian Foster
2019-01-31 15:46 ` [PATCH v2 7/7] xfs: factor xfs_da3_blkinfo verification into common helper Brian Foster
2019-01-31 17:51 ` Darrick J. Wong
2019-01-31 18:04 ` Brian Foster
2019-01-31 17:54 ` [PATCH v2 0/7] xfs: fix [f]inobt magic value verification Darrick J. Wong
2019-01-31 18:03 ` Brian Foster [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190131180358.GA36239@bfoster \
--to=bfoster@redhat.com \
--cc=darrick.wong@oracle.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).