* [PATCH] xfs: add missing error check in xfs_prepare_shift()
@ 2019-04-26 12:06 Brian Foster
2019-04-26 14:30 ` Darrick J. Wong
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Brian Foster @ 2019-04-26 12:06 UTC (permalink / raw)
To: linux-xfs
xfs_prepare_shift() fails to check the error return from
xfs_flush_unmap_range(). If the latter fails, that could lead to an
insert/collapse range operation over a delalloc range, which is not
supported.
Add an error check and return appropriately. This is reproduced
rarely by generic/475.
Signed-off-by: Brian Foster <bfoster@redhat.com>
---
fs/xfs/xfs_bmap_util.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
index 2db43ff4f8b5..06d07f1e310b 100644
--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -1193,6 +1193,8 @@ xfs_prepare_shift(
* about to shift down every extent from offset to EOF.
*/
error = xfs_flush_unmap_range(ip, offset, XFS_ISIZE(ip));
+ if (error)
+ return error;
/*
* Clean out anything hanging around in the cow fork now that
--
2.17.2
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] xfs: add missing error check in xfs_prepare_shift()
2019-04-26 12:06 [PATCH] xfs: add missing error check in xfs_prepare_shift() Brian Foster
@ 2019-04-26 14:30 ` Darrick J. Wong
2019-04-26 23:39 ` Allison Henderson
2019-04-28 22:41 ` Dave Chinner
2 siblings, 0 replies; 4+ messages in thread
From: Darrick J. Wong @ 2019-04-26 14:30 UTC (permalink / raw)
To: Brian Foster; +Cc: linux-xfs
On Fri, Apr 26, 2019 at 08:06:33AM -0400, Brian Foster wrote:
> xfs_prepare_shift() fails to check the error return from
> xfs_flush_unmap_range(). If the latter fails, that could lead to an
> insert/collapse range operation over a delalloc range, which is not
> supported.
>
> Add an error check and return appropriately. This is reproduced
> rarely by generic/475.
>
> Signed-off-by: Brian Foster <bfoster@redhat.com>
Looks ok,
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
--D
> ---
> fs/xfs/xfs_bmap_util.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
> index 2db43ff4f8b5..06d07f1e310b 100644
> --- a/fs/xfs/xfs_bmap_util.c
> +++ b/fs/xfs/xfs_bmap_util.c
> @@ -1193,6 +1193,8 @@ xfs_prepare_shift(
> * about to shift down every extent from offset to EOF.
> */
> error = xfs_flush_unmap_range(ip, offset, XFS_ISIZE(ip));
> + if (error)
> + return error;
>
> /*
> * Clean out anything hanging around in the cow fork now that
> --
> 2.17.2
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] xfs: add missing error check in xfs_prepare_shift()
2019-04-26 12:06 [PATCH] xfs: add missing error check in xfs_prepare_shift() Brian Foster
2019-04-26 14:30 ` Darrick J. Wong
@ 2019-04-26 23:39 ` Allison Henderson
2019-04-28 22:41 ` Dave Chinner
2 siblings, 0 replies; 4+ messages in thread
From: Allison Henderson @ 2019-04-26 23:39 UTC (permalink / raw)
To: Brian Foster, linux-xfs
Looks ok to me. You can add my review:
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
On 4/26/19 5:06 AM, Brian Foster wrote:
> xfs_prepare_shift() fails to check the error return from
> xfs_flush_unmap_range(). If the latter fails, that could lead to an
> insert/collapse range operation over a delalloc range, which is not
> supported.
>
> Add an error check and return appropriately. This is reproduced
> rarely by generic/475.
>
> Signed-off-by: Brian Foster <bfoster@redhat.com>
> ---
> fs/xfs/xfs_bmap_util.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
> index 2db43ff4f8b5..06d07f1e310b 100644
> --- a/fs/xfs/xfs_bmap_util.c
> +++ b/fs/xfs/xfs_bmap_util.c
> @@ -1193,6 +1193,8 @@ xfs_prepare_shift(
> * about to shift down every extent from offset to EOF.
> */
> error = xfs_flush_unmap_range(ip, offset, XFS_ISIZE(ip));
> + if (error)
> + return error;
>
> /*
> * Clean out anything hanging around in the cow fork now that
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] xfs: add missing error check in xfs_prepare_shift()
2019-04-26 12:06 [PATCH] xfs: add missing error check in xfs_prepare_shift() Brian Foster
2019-04-26 14:30 ` Darrick J. Wong
2019-04-26 23:39 ` Allison Henderson
@ 2019-04-28 22:41 ` Dave Chinner
2 siblings, 0 replies; 4+ messages in thread
From: Dave Chinner @ 2019-04-28 22:41 UTC (permalink / raw)
To: Brian Foster; +Cc: linux-xfs
On Fri, Apr 26, 2019 at 08:06:33AM -0400, Brian Foster wrote:
> xfs_prepare_shift() fails to check the error return from
> xfs_flush_unmap_range(). If the latter fails, that could lead to an
> insert/collapse range operation over a delalloc range, which is not
> supported.
>
> Add an error check and return appropriately. This is reproduced
> rarely by generic/475.
>
> Signed-off-by: Brian Foster <bfoster@redhat.com>
> ---
> fs/xfs/xfs_bmap_util.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
> index 2db43ff4f8b5..06d07f1e310b 100644
> --- a/fs/xfs/xfs_bmap_util.c
> +++ b/fs/xfs/xfs_bmap_util.c
> @@ -1193,6 +1193,8 @@ xfs_prepare_shift(
> * about to shift down every extent from offset to EOF.
> */
> error = xfs_flush_unmap_range(ip, offset, XFS_ISIZE(ip));
> + if (error)
> + return error;
Urk. My fault.
Fixes: 7f9f71be84bc ("xfs: extent shifting doesn't fully invalidate page cache")
Not sure how I screwed up that simple change so obviously and didn't
notice it.
Fix for the fix looks good.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Cheers,
Dave.
--
Dave Chinner
david@fromorbit.com
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-04-28 22:41 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-04-26 12:06 [PATCH] xfs: add missing error check in xfs_prepare_shift() Brian Foster
2019-04-26 14:30 ` Darrick J. Wong
2019-04-26 23:39 ` Allison Henderson
2019-04-28 22:41 ` Dave Chinner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox