From: Dave Chinner <david@fromorbit.com>
To: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: sandeen@sandeen.net, linux-xfs@vger.kernel.org
Subject: Re: [PATCH 5/6] misc: convert from XFS_IOC_FSINUMBERS to XFS_IOC_INUMBERS
Date: Fri, 13 Sep 2019 11:10:36 +1000 [thread overview]
Message-ID: <20190913011036.GX16973@dread.disaster.area> (raw)
In-Reply-To: <156774092832.2643497.11735239040494298471.stgit@magnolia>
On Thu, Sep 05, 2019 at 08:35:28PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
>
> Convert all programs to use the v5 inumbers ioctl.
>
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> ---
> io/imap.c | 26 +++++-----
> io/open.c | 27 +++++++----
> libfrog/bulkstat.c | 132 ++++++++++++++++++++++++++++++++++++++++++++++------
> libfrog/bulkstat.h | 10 +++-
> scrub/fscounters.c | 21 +++++---
> scrub/inodes.c | 36 ++++++++------
> 6 files changed, 189 insertions(+), 63 deletions(-)
....
> diff --git a/io/open.c b/io/open.c
> index e1979501..e198bcd8 100644
> --- a/io/open.c
> +++ b/io/open.c
> @@ -681,39 +681,46 @@ static __u64
> get_last_inode(void)
> {
> struct xfs_fd xfd = XFS_FD_INIT(file->fd);
> - uint64_t lastip = 0;
> + struct xfs_inumbers_req *ireq;
> uint32_t lastgrp = 0;
> - uint32_t ocount = 0;
> __u64 last_ino;
__u64 last_ino = 0;
> - struct xfs_inogrp igroup[IGROUP_NR];
> +
> + ireq = xfrog_inumbers_alloc_req(IGROUP_NR, 0);
> + if (!ireq) {
> + perror("alloc req");
> + return 0;
> + }
>
> for (;;) {
> int ret;
>
> - ret = xfrog_inumbers(&xfd, &lastip, IGROUP_NR, igroup,
> - &ocount);
> + ret = xfrog_inumbers(&xfd, ireq);
> if (ret) {
> errno = ret;
> perror("XFS_IOC_FSINUMBERS");
> + free(ireq);
> return 0;
goto out;
> }
>
> /* Did we reach the last inode? */
> - if (ocount == 0)
> + if (ireq->hdr.ocount == 0)
> break;
>
> /* last inode in igroup table */
> - lastgrp = ocount;
> + lastgrp = ireq->hdr.ocount;
> }
>
> - if (lastgrp == 0)
> + if (lastgrp == 0) {
> + free(ireq);
> return 0;
goto out;
> + }
>
> lastgrp--;
>
> /* The last inode number in use */
> - last_ino = igroup[lastgrp].xi_startino +
> - libxfs_highbit64(igroup[lastgrp].xi_allocmask);
> + last_ino = ireq->inumbers[lastgrp].xi_startino +
> + libxfs_highbit64(ireq->inumbers[lastgrp].xi_allocmask);
out:
> + free(ireq);
>
> return last_ino;
> }
> diff --git a/libfrog/bulkstat.c b/libfrog/bulkstat.c
> index 2a70824e..748d0f32 100644
> --- a/libfrog/bulkstat.c
> +++ b/libfrog/bulkstat.c
> @@ -387,6 +387,86 @@ xfrog_bulkstat_alloc_req(
> return breq;
> }
>
> +/* Convert an inumbers (v5) struct to a inogrp (v1) struct. */
> +void
> +xfrog_inumbers_to_inogrp(
> + struct xfs_inogrp *ig1,
> + const struct xfs_inumbers *ig)
> +{
> + ig1->xi_startino = ig->xi_startino;
> + ig1->xi_alloccount = ig->xi_alloccount;
> + ig1->xi_allocmask = ig->xi_allocmask;
Same thing - inumbers_v5_to_v1(from, to);
> +}
> +
> +/* Convert an inogrp (v1) struct to a inumbers (v5) struct. */
> +void
> +xfrog_inogrp_to_inumbers(
> + struct xfs_inumbers *ig,
> + const struct xfs_inogrp *ig1)
ditto.
> +{
> + memset(ig, 0, sizeof(*ig));
> + ig->xi_version = XFS_INUMBERS_VERSION_V1;
> +
> + ig->xi_startino = ig1->xi_startino;
> + ig->xi_alloccount = ig1->xi_alloccount;
> + ig->xi_allocmask = ig1->xi_allocmask;
> +}
> +
> +static uint64_t xfrog_inum_ino(void *v1_rec)
> +{
> + return ((struct xfs_inogrp *)v1_rec)->xi_startino;
> +}
> +
> +static void xfrog_inum_cvt(struct xfs_fd *xfd, void *v5, void *v1)
> +{
> + xfrog_inogrp_to_inumbers(v5, v1);
> +}
what's the point of this wrapper?
> +
> +/* Query inode allocation bitmask information using v5 ioctl. */
> +static int
> +xfrog_inumbers5(
> + struct xfs_fd *xfd,
> + struct xfs_inumbers_req *req)
> +{
> + int ret;
> +
> + ret = ioctl(xfd->fd, XFS_IOC_INUMBERS, req);
> + if (ret)
> + return errno;
> + return 0;
negative errors.
> +}
> +
> +/* Query inode allocation bitmask information using v1 ioctl. */
> +static int
> +xfrog_inumbers1(
> + struct xfs_fd *xfd,
> + struct xfs_inumbers_req *req)
> +{
> + struct xfs_fsop_bulkreq bulkreq = { 0 };
> + int error;
> +
> + error = xfrog_bulkstat_prep_v1_emulation(xfd);
> + if (error)
> + return error;
> +
> + error = xfrog_bulk_req_setup(xfd, &req->hdr, &bulkreq,
> + sizeof(struct xfs_inogrp));
> + if (error == ECANCELED)
> + goto out_teardown;
> + if (error)
> + return error;
> +
> + error = ioctl(xfd->fd, XFS_IOC_FSINUMBERS, &bulkreq);
> + if (error)
> + error = errno;
negative errors.
> +
> +out_teardown:
> + return xfrog_bulk_req_teardown(xfd, &req->hdr, &bulkreq,
> + sizeof(struct xfs_inogrp), xfrog_inum_ino,
> + &req->inumbers, sizeof(struct xfs_inumbers),
> + xfrog_inum_cvt, 64, error);
> +}
....
> struct xfs_bulkstat *bs;
> - uint64_t igrp_ino;
> - uint32_t igrplen = 0;
> + struct xfs_inumbers *inogrp;
Isn't that mixing v1 structure names with v5 operations? Aren't we
pulling infomration out in inode records?
Cheers,
Dave.
--
Dave Chinner
david@fromorbit.com
next prev parent reply other threads:[~2019-09-13 1:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 3:34 [PATCH 0/6] xfsprogs: port utilities to bulkstat v5 Darrick J. Wong
2019-09-06 3:34 ` [PATCH 1/6] man: add documentation for v5 bulkstat ioctl Darrick J. Wong
2019-09-06 3:35 ` [PATCH 2/6] man: add documentation for v5 inumbers ioctl Darrick J. Wong
2019-09-06 3:35 ` [PATCH 3/6] misc: convert XFS_IOC_FSBULKSTAT to XFS_IOC_BULKSTAT Darrick J. Wong
2019-09-13 0:54 ` Dave Chinner
2019-09-16 21:58 ` Darrick J. Wong
2019-09-06 3:35 ` [PATCH 4/6] misc: convert to v5 bulkstat_single call Darrick J. Wong
2019-09-13 1:02 ` Dave Chinner
2019-09-16 22:02 ` Darrick J. Wong
2019-09-06 3:35 ` [PATCH 5/6] misc: convert from XFS_IOC_FSINUMBERS to XFS_IOC_INUMBERS Darrick J. Wong
2019-09-13 1:10 ` Dave Chinner [this message]
2019-09-16 22:05 ` Darrick J. Wong
2019-09-06 3:35 ` [PATCH 6/6] libxfs: revert FSGEOMETRY v5 -> v4 hack Darrick J. Wong
2019-09-10 6:46 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190913011036.GX16973@dread.disaster.area \
--to=david@fromorbit.com \
--cc=darrick.wong@oracle.com \
--cc=linux-xfs@vger.kernel.org \
--cc=sandeen@sandeen.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox