linux-xfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brian Foster <bfoster@redhat.com>
To: Christoph Hellwig <hch@lst.de>
Cc: linux-xfs@vger.kernel.org, Dave Chinner <david@fromorbit.com>
Subject: Re: [PATCH 02/14] xfs: factor out a xlog_wait_on_iclog helper
Date: Tue, 17 Mar 2020 09:23:13 -0400	[thread overview]
Message-ID: <20200317132313.GC24078@bfoster> (raw)
In-Reply-To: <20200316144233.900390-3-hch@lst.de>

On Mon, Mar 16, 2020 at 03:42:21PM +0100, Christoph Hellwig wrote:
> Factor out the shared code to wait for a log force into a new helper.
> This helper uses the XLOG_FORCED_SHUTDOWN check previous only used
> by the unmount code over the equivalent iclog ioerror state used by
> the other two functions.
> 
> There is a slight behavior change in that the force of the unmount
> record is now accounted in the log force statistics.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---

Reviewed-by: Brian Foster <bfoster@redhat.com>

>  fs/xfs/xfs_log.c | 76 ++++++++++++++++++++----------------------------
>  1 file changed, 31 insertions(+), 45 deletions(-)
> 
> diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
> index 0986983ef6b5..955df2902c2c 100644
> --- a/fs/xfs/xfs_log.c
> +++ b/fs/xfs/xfs_log.c
> @@ -859,6 +859,31 @@ xfs_log_mount_cancel(
>  	xfs_log_unmount(mp);
>  }
>  
> +/*
> + * Wait for the iclog to be written disk, or return an error if the log has been
> + * shut down.
> + */
> +static int
> +xlog_wait_on_iclog(
> +	struct xlog_in_core	*iclog)
> +		__releases(iclog->ic_log->l_icloglock)
> +{
> +	struct xlog		*log = iclog->ic_log;
> +
> +	if (!XLOG_FORCED_SHUTDOWN(log) &&
> +	    iclog->ic_state != XLOG_STATE_ACTIVE &&
> +	    iclog->ic_state != XLOG_STATE_DIRTY) {
> +		XFS_STATS_INC(log->l_mp, xs_log_force_sleep);
> +		xlog_wait(&iclog->ic_force_wait, &log->l_icloglock);
> +	} else {
> +		spin_unlock(&log->l_icloglock);
> +	}
> +
> +	if (XLOG_FORCED_SHUTDOWN(log))
> +		return -EIO;
> +	return 0;
> +}
> +
>  /*
>   * Final log writes as part of unmount.
>   *
> @@ -926,18 +951,7 @@ xfs_log_write_unmount_record(
>  	atomic_inc(&iclog->ic_refcnt);
>  	xlog_state_want_sync(log, iclog);
>  	error = xlog_state_release_iclog(log, iclog);
> -	switch (iclog->ic_state) {
> -	default:
> -		if (!XLOG_FORCED_SHUTDOWN(log)) {
> -			xlog_wait(&iclog->ic_force_wait, &log->l_icloglock);
> -			break;
> -		}
> -		/* fall through */
> -	case XLOG_STATE_ACTIVE:
> -	case XLOG_STATE_DIRTY:
> -		spin_unlock(&log->l_icloglock);
> -		break;
> -	}
> +	xlog_wait_on_iclog(iclog);
>  
>  	if (tic) {
>  		trace_xfs_log_umount_write(log, tic);
> @@ -3230,9 +3244,6 @@ xfs_log_force(
>  		 * previous iclog and go to sleep.
>  		 */
>  		iclog = iclog->ic_prev;
> -		if (iclog->ic_state == XLOG_STATE_ACTIVE ||
> -		    iclog->ic_state == XLOG_STATE_DIRTY)
> -			goto out_unlock;
>  	} else if (iclog->ic_state == XLOG_STATE_ACTIVE) {
>  		if (atomic_read(&iclog->ic_refcnt) == 0) {
>  			/*
> @@ -3248,8 +3259,7 @@ xfs_log_force(
>  			if (xlog_state_release_iclog(log, iclog))
>  				goto out_error;
>  
> -			if (be64_to_cpu(iclog->ic_header.h_lsn) != lsn ||
> -			    iclog->ic_state == XLOG_STATE_DIRTY)
> +			if (be64_to_cpu(iclog->ic_header.h_lsn) != lsn)
>  				goto out_unlock;
>  		} else {
>  			/*
> @@ -3269,17 +3279,8 @@ xfs_log_force(
>  		;
>  	}
>  
> -	if (!(flags & XFS_LOG_SYNC))
> -		goto out_unlock;
> -
> -	if (iclog->ic_state == XLOG_STATE_IOERROR)
> -		goto out_error;
> -	XFS_STATS_INC(mp, xs_log_force_sleep);
> -	xlog_wait(&iclog->ic_force_wait, &log->l_icloglock);
> -	if (iclog->ic_state == XLOG_STATE_IOERROR)
> -		return -EIO;
> -	return 0;
> -
> +	if (flags & XFS_LOG_SYNC)
> +		return xlog_wait_on_iclog(iclog);
>  out_unlock:
>  	spin_unlock(&log->l_icloglock);
>  	return 0;
> @@ -3310,9 +3311,6 @@ __xfs_log_force_lsn(
>  			goto out_unlock;
>  	}
>  
> -	if (iclog->ic_state == XLOG_STATE_DIRTY)
> -		goto out_unlock;
> -
>  	if (iclog->ic_state == XLOG_STATE_ACTIVE) {
>  		/*
>  		 * We sleep here if we haven't already slept (e.g. this is the
> @@ -3346,20 +3344,8 @@ __xfs_log_force_lsn(
>  			*log_flushed = 1;
>  	}
>  
> -	if (!(flags & XFS_LOG_SYNC) ||
> -	    (iclog->ic_state == XLOG_STATE_ACTIVE ||
> -	     iclog->ic_state == XLOG_STATE_DIRTY))
> -		goto out_unlock;
> -
> -	if (iclog->ic_state == XLOG_STATE_IOERROR)
> -		goto out_error;
> -
> -	XFS_STATS_INC(mp, xs_log_force_sleep);
> -	xlog_wait(&iclog->ic_force_wait, &log->l_icloglock);
> -	if (iclog->ic_state == XLOG_STATE_IOERROR)
> -		return -EIO;
> -	return 0;
> -
> +	if (flags & XFS_LOG_SYNC)
> +		return xlog_wait_on_iclog(iclog);
>  out_unlock:
>  	spin_unlock(&log->l_icloglock);
>  	return 0;
> -- 
> 2.24.1
> 


  parent reply	other threads:[~2020-03-17 13:23 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-16 14:42 cleanup log I/O error handling v2 Christoph Hellwig
2020-03-16 14:42 ` [PATCH 01/14] xfs: merge xlog_cil_push into xlog_cil_push_work Christoph Hellwig
2020-03-16 19:40   ` Darrick J. Wong
2020-03-17  0:15   ` Dave Chinner
2020-03-17 13:23   ` Brian Foster
2020-03-16 14:42 ` [PATCH 02/14] xfs: factor out a xlog_wait_on_iclog helper Christoph Hellwig
2020-03-16 20:20   ` Darrick J. Wong
2020-03-17 13:23   ` Brian Foster [this message]
2020-03-16 14:42 ` [PATCH 03/14] xfs: simplify the xfs_log_release_iclog calling convention Christoph Hellwig
2020-03-16 20:21   ` Darrick J. Wong
2020-03-17 13:23   ` Brian Foster
2020-03-16 14:42 ` [PATCH 04/14] xfs: simplify log shutdown checking in xfs_log_release_iclog Christoph Hellwig
2020-03-16 20:33   ` Darrick J. Wong
2020-03-17 13:24   ` Brian Foster
2020-03-16 14:42 ` [PATCH 05/14] xfs: remove the aborted parameter to xlog_state_done_syncing Christoph Hellwig
2020-03-16 20:50   ` Darrick J. Wong
2020-03-18  9:38     ` Christoph Hellwig
2020-03-17 13:24   ` Brian Foster
2020-03-16 14:42 ` [PATCH 06/14] xfs: refactor xlog_state_clean_iclog Christoph Hellwig
2020-03-16 20:59   ` Darrick J. Wong
2020-03-17 13:25   ` Brian Foster
2020-03-18  9:40     ` Christoph Hellwig
2020-03-16 14:42 ` [PATCH 07/14] xfs: move the ioerror check out of xlog_state_clean_iclog Christoph Hellwig
2020-03-16 21:00   ` Darrick J. Wong
2020-03-17 13:25   ` Brian Foster
2020-03-16 14:42 ` [PATCH 08/14] xfs: move xlog_state_do_iclog_callbacks up Christoph Hellwig
2020-03-16 21:00   ` Darrick J. Wong
2020-03-18 14:44   ` Brian Foster
2020-03-16 14:42 ` [PATCH 09/14] xfs: move log shut down handling out of xlog_state_iodone_process_iclog Christoph Hellwig
2020-03-16 21:02   ` Darrick J. Wong
2020-03-18 14:48   ` Brian Foster
2020-03-18 16:34     ` Christoph Hellwig
2020-03-19 11:36       ` Brian Foster
2020-03-19 13:05         ` Christoph Hellwig
2020-03-19 13:37           ` Brian Foster
2020-03-16 14:42 ` [PATCH 10/14] xfs: refactor xlog_state_iodone_process_iclog Christoph Hellwig
2020-03-16 21:07   ` Darrick J. Wong
2020-03-16 14:42 ` [PATCH 11/14] xfs: merge xlog_state_clean_iclog into xlog_state_iodone_process_iclog Christoph Hellwig
2020-03-16 21:09   ` Darrick J. Wong
2020-03-18 14:48   ` Brian Foster
2020-03-16 14:42 ` [PATCH 12/14] xfs: merge xlog_state_set_callback " Christoph Hellwig
2020-03-16 21:10   ` Darrick J. Wong
2020-03-18 14:48   ` Brian Foster
2020-03-16 14:42 ` [PATCH 13/14] xfs: remove xlog_state_want_sync Christoph Hellwig
2020-03-16 21:23   ` Darrick J. Wong
2020-03-18 14:48   ` Brian Foster
2020-03-16 14:42 ` [PATCH 14/14] xfs: remove XLOG_STATE_IOERROR Christoph Hellwig
2020-03-16 21:25   ` Darrick J. Wong
2020-03-18  9:43     ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200317132313.GC24078@bfoster \
    --to=bfoster@redhat.com \
    --cc=david@fromorbit.com \
    --cc=hch@lst.de \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).