From: Brian Foster <bfoster@redhat.com>
To: Christoph Hellwig <hch@lst.de>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [PATCH 1/2] xfs: refactor the buffer cancellation table helpers
Date: Tue, 28 Apr 2020 11:10:40 -0400 [thread overview]
Message-ID: <20200428151040.GA27954@bfoster> (raw)
In-Reply-To: <20200427135229.1480993-2-hch@lst.de>
On Mon, Apr 27, 2020 at 03:52:28PM +0200, Christoph Hellwig wrote:
> Replace the somewhat convoluted use of xlog_peek_buffer_cancelled and
> xlog_check_buffer_cancelled with two obvious helpers:
>
> xlog_is_buffer_cancelled, which returns true if there is a buffer in
> the cancellation table, and
> xlog_put_buffer_cancelled, which also decrements the reference count
> of the buffer cancellation table.
>
> Both share a little helper to look up the entry.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> fs/xfs/xfs_log_recover.c | 109 ++++++++++++++++++---------------------
> 1 file changed, 50 insertions(+), 59 deletions(-)
>
> diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
> index 11c3502b07b13..750a81b941ea4 100644
> --- a/fs/xfs/xfs_log_recover.c
> +++ b/fs/xfs/xfs_log_recover.c
> @@ -1972,26 +1972,17 @@ xlog_recover_buffer_pass1(
> return 0;
> }
>
...
> /*
> - * If the buffer is being cancelled then return 1 so that it will be cancelled,
> - * otherwise return 0. If the buffer is actually a buffer cancel item
> - * (XFS_BLF_CANCEL is set), then decrement the refcount on the entry in the
> - * table and remove it from the table if this is the last reference.
> + * Check if there is and entry for blkno, len in the buffer cancel record table.
> + */
> +static bool
> +xlog_is_buffer_cancelled(
> + struct xlog *log,
> + xfs_daddr_t blkno,
> + uint len)
> +{
> + return xlog_find_buffer_cancelled(log, blkno, len) != NULL;
> +}
> +
> +/*
> + * Check if there is and entry for blkno, len in the buffer cancel record table,
Nit: an
> + * and decremented the reference count on it if there is one.
Nit: decrement
...
> @@ -2733,10 +2722,15 @@ xlog_recover_buffer_pass2(
> * In this pass we only want to recover all the buffers which have
> * not been cancelled and are not cancellation buffers themselves.
> */
> - if (xlog_check_buffer_cancelled(log, buf_f->blf_blkno,
> - buf_f->blf_len, buf_f->blf_flags)) {
> - trace_xfs_log_recover_buf_cancel(log, buf_f);
> - return 0;
> + if (buf_f->blf_flags & XFS_BLF_CANCEL) {
> + if (xlog_put_buffer_cancelled(log, buf_f->blf_blkno,
> + buf_f->blf_len))
> + goto cancelled;
> + } else {
> +
Extra whitespace above. With those nits fixed:
Reviewed-by: Brian Foster <bfoster@redhat.com>
> + if (xlog_is_buffer_cancelled(log, buf_f->blf_blkno,
> + buf_f->blf_len))
> + goto cancelled;
> }
>
> trace_xfs_log_recover_buf_recover(log, buf_f);
> @@ -2820,6 +2814,9 @@ xlog_recover_buffer_pass2(
> out_release:
> xfs_buf_relse(bp);
> return error;
> +cancelled:
> + trace_xfs_log_recover_buf_cancel(log, buf_f);
> + return 0;
> }
>
> /*
> @@ -2937,8 +2934,7 @@ xlog_recover_inode_pass2(
> * Inode buffers can be freed, look out for it,
> * and do not replay the inode.
> */
> - if (xlog_check_buffer_cancelled(log, in_f->ilf_blkno,
> - in_f->ilf_len, 0)) {
> + if (xlog_is_buffer_cancelled(log, in_f->ilf_blkno, in_f->ilf_len)) {
> error = 0;
> trace_xfs_log_recover_inode_cancel(log, in_f);
> goto error;
> @@ -3840,7 +3836,7 @@ xlog_recover_do_icreate_pass2(
>
> daddr = XFS_AGB_TO_DADDR(mp, agno,
> agbno + i * igeo->blocks_per_cluster);
> - if (xlog_check_buffer_cancelled(log, daddr, bb_per_cluster, 0))
> + if (xlog_is_buffer_cancelled(log, daddr, bb_per_cluster))
> cancel_count++;
> }
>
> @@ -3876,11 +3872,8 @@ xlog_recover_buffer_ra_pass2(
> struct xfs_buf_log_format *buf_f = item->ri_buf[0].i_addr;
> struct xfs_mount *mp = log->l_mp;
>
> - if (xlog_peek_buffer_cancelled(log, buf_f->blf_blkno,
> - buf_f->blf_len, buf_f->blf_flags)) {
> + if (xlog_is_buffer_cancelled(log, buf_f->blf_blkno, buf_f->blf_len))
> return;
> - }
> -
> xfs_buf_readahead(mp->m_ddev_targp, buf_f->blf_blkno,
> buf_f->blf_len, NULL);
> }
> @@ -3905,9 +3898,8 @@ xlog_recover_inode_ra_pass2(
> return;
> }
>
> - if (xlog_peek_buffer_cancelled(log, ilfp->ilf_blkno, ilfp->ilf_len, 0))
> + if (xlog_is_buffer_cancelled(log, ilfp->ilf_blkno, ilfp->ilf_len))
> return;
> -
> xfs_buf_readahead(mp->m_ddev_targp, ilfp->ilf_blkno,
> ilfp->ilf_len, &xfs_inode_buf_ra_ops);
> }
> @@ -3943,9 +3935,8 @@ xlog_recover_dquot_ra_pass2(
> ASSERT(dq_f->qlf_len == 1);
>
> len = XFS_FSB_TO_BB(mp, dq_f->qlf_len);
> - if (xlog_peek_buffer_cancelled(log, dq_f->qlf_blkno, len, 0))
> + if (xlog_is_buffer_cancelled(log, dq_f->qlf_blkno, len))
> return;
> -
> xfs_buf_readahead(mp->m_ddev_targp, dq_f->qlf_blkno, len,
> &xfs_dquot_buf_ra_ops);
> }
> --
> 2.26.1
>
next prev parent reply other threads:[~2020-04-28 15:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-27 13:52 two small log recovery cleanups Christoph Hellwig
2020-04-27 13:52 ` [PATCH 1/2] xfs: refactor the buffer cancellation table helpers Christoph Hellwig
2020-04-27 18:12 ` Darrick J. Wong
2020-04-28 15:10 ` Brian Foster [this message]
2020-04-27 13:52 ` [PATCH 2/2] xfs: rename inode_list xlog_recover_reorder_trans Christoph Hellwig
2020-04-27 18:05 ` Darrick J. Wong
2020-04-28 15:10 ` Brian Foster
2020-04-27 19:33 ` [PATCH 3/2] xfs: factor out a xlog_buf_readahead helper Christoph Hellwig
2020-04-28 15:10 ` Brian Foster
2020-04-27 19:33 ` [PATCH 4/2] xfs: simplify xlog_recover_inode_ra_pass2 Christoph Hellwig
2020-04-28 15:11 ` Brian Foster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200428151040.GA27954@bfoster \
--to=bfoster@redhat.com \
--cc=hch@lst.de \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).