From: Brian Foster <bfoster@redhat.com>
To: Christoph Hellwig <hch@lst.de>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [PATCH 3/2] xfs: factor out a xlog_buf_readahead helper
Date: Tue, 28 Apr 2020 11:10:58 -0400 [thread overview]
Message-ID: <20200428151058.GC27954@bfoster> (raw)
In-Reply-To: <20200427193332.GA24934@lst.de>
On Mon, Apr 27, 2020 at 09:33:32PM +0200, Christoph Hellwig wrote:
> Add a little helper to readahead a buffer if it hasn't been cancelled.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
Reviewed-by: Brian Foster <bfoster@redhat.com>
> fs/xfs/xfs_log_recover.c | 34 +++++++++++++++++-----------------
> 1 file changed, 17 insertions(+), 17 deletions(-)
>
> diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
> index 33cac61570abe..4cb8f24f3aa63 100644
> --- a/fs/xfs/xfs_log_recover.c
> +++ b/fs/xfs/xfs_log_recover.c
> @@ -2034,6 +2034,17 @@ xlog_put_buffer_cancelled(
> return true;
> }
>
> +static void
> +xlog_buf_readahead(
> + struct xlog *log,
> + xfs_daddr_t blkno,
> + uint len,
> + const struct xfs_buf_ops *ops)
> +{
> + if (!xlog_is_buffer_cancelled(log, blkno, len))
> + xfs_buf_readahead(log->l_mp->m_ddev_targp, blkno, len, ops);
> +}
> +
> /*
> * Perform recovery for a buffer full of inodes. In these buffers, the only
> * data which should be recovered is that which corresponds to the
> @@ -3870,12 +3881,8 @@ xlog_recover_buffer_ra_pass2(
> struct xlog_recover_item *item)
> {
> struct xfs_buf_log_format *buf_f = item->ri_buf[0].i_addr;
> - struct xfs_mount *mp = log->l_mp;
>
> - if (xlog_is_buffer_cancelled(log, buf_f->blf_blkno, buf_f->blf_len))
> - return;
> - xfs_buf_readahead(mp->m_ddev_targp, buf_f->blf_blkno,
> - buf_f->blf_len, NULL);
> + xlog_buf_readahead(log, buf_f->blf_blkno, buf_f->blf_len, NULL);
> }
>
> STATIC void
> @@ -3885,7 +3892,6 @@ xlog_recover_inode_ra_pass2(
> {
> struct xfs_inode_log_format ilf_buf;
> struct xfs_inode_log_format *ilfp;
> - struct xfs_mount *mp = log->l_mp;
> int error;
>
> if (item->ri_buf[0].i_len == sizeof(struct xfs_inode_log_format)) {
> @@ -3898,10 +3904,8 @@ xlog_recover_inode_ra_pass2(
> return;
> }
>
> - if (xlog_is_buffer_cancelled(log, ilfp->ilf_blkno, ilfp->ilf_len))
> - return;
> - xfs_buf_readahead(mp->m_ddev_targp, ilfp->ilf_blkno,
> - ilfp->ilf_len, &xfs_inode_buf_ra_ops);
> + xlog_buf_readahead(log, ilfp->ilf_blkno, ilfp->ilf_len,
> + &xfs_inode_buf_ra_ops);
> }
>
> STATIC void
> @@ -3913,8 +3917,6 @@ xlog_recover_dquot_ra_pass2(
> struct xfs_disk_dquot *recddq;
> struct xfs_dq_logformat *dq_f;
> uint type;
> - int len;
> -
>
> if (mp->m_qflags == 0)
> return;
> @@ -3934,11 +3936,9 @@ xlog_recover_dquot_ra_pass2(
> ASSERT(dq_f);
> ASSERT(dq_f->qlf_len == 1);
>
> - len = XFS_FSB_TO_BB(mp, dq_f->qlf_len);
> - if (xlog_is_buffer_cancelled(log, dq_f->qlf_blkno, len))
> - return;
> - xfs_buf_readahead(mp->m_ddev_targp, dq_f->qlf_blkno, len,
> - &xfs_dquot_buf_ra_ops);
> + xlog_buf_readahead(log, dq_f->qlf_blkno,
> + XFS_FSB_TO_BB(mp, dq_f->qlf_len),
> + &xfs_dquot_buf_ra_ops);
> }
>
> STATIC void
> --
> 2.26.1
>
next prev parent reply other threads:[~2020-04-28 15:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-27 13:52 two small log recovery cleanups Christoph Hellwig
2020-04-27 13:52 ` [PATCH 1/2] xfs: refactor the buffer cancellation table helpers Christoph Hellwig
2020-04-27 18:12 ` Darrick J. Wong
2020-04-28 15:10 ` Brian Foster
2020-04-27 13:52 ` [PATCH 2/2] xfs: rename inode_list xlog_recover_reorder_trans Christoph Hellwig
2020-04-27 18:05 ` Darrick J. Wong
2020-04-28 15:10 ` Brian Foster
2020-04-27 19:33 ` [PATCH 3/2] xfs: factor out a xlog_buf_readahead helper Christoph Hellwig
2020-04-28 15:10 ` Brian Foster [this message]
2020-04-27 19:33 ` [PATCH 4/2] xfs: simplify xlog_recover_inode_ra_pass2 Christoph Hellwig
2020-04-28 15:11 ` Brian Foster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200428151058.GC27954@bfoster \
--to=bfoster@redhat.com \
--cc=hch@lst.de \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).