From: Dave Chinner <david@fromorbit.com>
To: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>,
Eric Sandeen <sandeen@sandeen.net>,
"Darrick J. Wong" <darrick.wong@oracle.com>,
Christoph Hellwig <hch@infradead.org>,
Theodore Ts'o <tytso@mit.edu>,
Andreas Dilger <adilger.kernel@dilger.ca>,
Alexander Viro <viro@zeniv.linux.org.uk>,
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>,
linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org,
linux-xfs <linux-xfs@vger.kernel.org>
Subject: Re: [PATCH] fs: i_version mntopt gets visible through /proc/mounts
Date: Fri, 19 Jun 2020 08:39:48 +1000 [thread overview]
Message-ID: <20200618223948.GI2005@dread.disaster.area> (raw)
In-Reply-To: <20200618034535.h5ho7pd4eilpbj3f@gabell>
On Wed, Jun 17, 2020 at 11:45:35PM -0400, Masayoshi Mizuma wrote:
> On Thu, Jun 18, 2020 at 01:05:39PM +1000, Dave Chinner wrote:
> > On Wed, Jun 17, 2020 at 09:30:26PM -0400, Masayoshi Mizuma wrote:
> > > On Wed, Jun 17, 2020 at 02:45:07PM -0400, J. Bruce Fields wrote:
> > > > On Wed, Jun 17, 2020 at 01:28:11PM -0500, Eric Sandeen wrote:
> > > > > but mount(8) has already exposed this interface:
> > > > >
> > > > > iversion
> > > > > Every time the inode is modified, the i_version field will be incremented.
> > > > >
> > > > > noiversion
> > > > > Do not increment the i_version inode field.
> > > > >
> > > > > so now what?
> > > >
> > > > It's not like anyone's actually depending on i_version *not* being
> > > > incremented. (Can you even observe it from userspace other than over
> > > > NFS?)
> > > >
> > > > So, just silently turn on the "iversion" behavior and ignore noiversion,
> > > > and I doubt you're going to break any real application.
> > >
> > > I suppose it's probably good to remain the options for user compatibility,
> > > however, it seems that iversion and noiversiont are useful for
> > > only ext4.
> > > How about moving iversion and noiversion description on mount(8)
> > > to ext4 specific option?
> > >
> > > And fixing the remount issue for XFS (maybe btrfs has the same
> > > issue as well)?
> > > For XFS like as:
> > >
> > > diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
> > > index 379cbff438bc..2ddd634cfb0b 100644
> > > --- a/fs/xfs/xfs_super.c
> > > +++ b/fs/xfs/xfs_super.c
> > > @@ -1748,6 +1748,9 @@ xfs_fc_reconfigure(
> > > return error;
> > > }
> > >
> > > + if (XFS_SB_VERSION_NUM(&mp->m_sb) == XFS_SB_VERSION_5)
> > > + mp->m_super->s_flags |= SB_I_VERSION;
> > > +
> > > return 0;
> > > }
> >
> > no this doesn't work, because the sueprblock flags are modified
> > after ->reconfigure is called.
> >
> > i.e. reconfigure_super() does this:
> >
> > if (fc->ops->reconfigure) {
> > retval = fc->ops->reconfigure(fc);
> > if (retval) {
> > if (!force)
> > goto cancel_readonly;
> > /* If forced remount, go ahead despite any errors */
> > WARN(1, "forced remount of a %s fs returned %i\n",
> > sb->s_type->name, retval);
> > }
> > }
> >
> > WRITE_ONCE(sb->s_flags, ((sb->s_flags & ~fc->sb_flags_mask) |
> > (fc->sb_flags & fc->sb_flags_mask)));
> >
> > And it's the WRITE_ONCE() line that clears SB_I_VERSION out of
> > sb->s_flags. Hence adding it in ->reconfigure doesn't help.
> >
> > What we actually want to do here in xfs_fc_reconfigure() is this:
> >
> > if (XFS_SB_VERSION_NUM(&mp->m_sb) == XFS_SB_VERSION_5)
> > fc->sb_flags_mask |= SB_I_VERSION;
> >
> > So that the SB_I_VERSION is not cleared from sb->s_flags.
> >
> > I'll also note that btrfs will need the same fix, because it also
> > sets SB_I_VERSION unconditionally, as will any other filesystem that
> > does this, too.
>
> Thank you for pointed it out.
> How about following change? I believe it works both xfs and btrfs...
>
> diff --git a/fs/super.c b/fs/super.c
> index b0a511bef4a0..42fc6334d384 100644
> --- a/fs/super.c
> +++ b/fs/super.c
> @@ -973,6 +973,9 @@ int reconfigure_super(struct fs_context *fc)
> }
> }
>
> + if (sb->s_flags & SB_I_VERSION)
> + fc->sb_flags |= MS_I_VERSION;
> +
> WRITE_ONCE(sb->s_flags, ((sb->s_flags & ~fc->sb_flags_mask) |
> (fc->sb_flags & fc->sb_flags_mask)));
> /* Needs to be ordered wrt mnt_is_readonly() */
This will prevent SB_I_VERSION from being turned off at all. That
will break existing filesystems that allow SB_I_VERSION to be turned
off on remount, such as ext4.
The manipulations here need to be in the filesystem specific code;
we screwed this one up so badly there is no "one size fits all"
behaviour that we can implement in the generic code...
Cheers,
Dave.
--
Dave Chinner
david@fromorbit.com
next prev parent reply other threads:[~2020-06-18 22:40 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200616202123.12656-1-msys.mizuma@gmail.com>
[not found] ` <20200617080314.GA7147@infradead.org>
[not found] ` <20200617155836.GD13815@fieldses.org>
2020-06-17 17:14 ` [PATCH] fs: i_version mntopt gets visible through /proc/mounts Eric Sandeen
2020-06-17 17:24 ` Darrick J. Wong
2020-06-17 17:55 ` Eric Sandeen
2020-06-17 18:18 ` J. Bruce Fields
2020-06-17 18:28 ` Eric Sandeen
2020-06-17 18:45 ` J. Bruce Fields
2020-06-18 1:30 ` Masayoshi Mizuma
2020-06-18 1:44 ` Darrick J. Wong
2020-06-18 3:33 ` Masayoshi Mizuma
2020-06-18 3:05 ` Dave Chinner
2020-06-18 3:45 ` Masayoshi Mizuma
2020-06-18 22:39 ` Dave Chinner [this message]
2020-06-19 2:20 ` J. Bruce Fields
2020-06-19 2:44 ` Dave Chinner
2020-06-19 12:04 ` Jeff Layton
2020-06-19 20:40 ` J. Bruce Fields
2020-06-19 22:10 ` Dave Chinner
2020-06-19 22:28 ` J. Bruce Fields
2020-06-20 1:49 ` Dave Chinner
2020-06-20 1:56 ` J. Bruce Fields
2020-06-20 17:00 ` Eric Sandeen
2020-06-20 17:09 ` J. Bruce Fields
2020-06-20 23:54 ` Dave Chinner
2020-06-22 21:26 ` J. Bruce Fields
2020-06-22 22:03 ` Dave Chinner
2020-06-19 13:17 ` Christoph Hellwig
2020-07-13 23:45 ` Eric Sandeen
2020-07-14 8:30 ` Christoph Hellwig
2020-07-14 20:26 ` Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200618223948.GI2005@dread.disaster.area \
--to=david@fromorbit.com \
--cc=adilger.kernel@dilger.ca \
--cc=bfields@fieldses.org \
--cc=darrick.wong@oracle.com \
--cc=hch@infradead.org \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
--cc=m.mizuma@jp.fujitsu.com \
--cc=msys.mizuma@gmail.com \
--cc=sandeen@sandeen.net \
--cc=tytso@mit.edu \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox