From: Brian Foster <bfoster@redhat.com>
To: Christoph Hellwig <hch@lst.de>
Cc: linux-xfs@vger.kernel.org, Avi Kivity <avi@scylladb.com>
Subject: Re: [PATCH 1/3] xfs: factor out a xfs_ilock_iocb helper
Date: Mon, 11 Jan 2021 13:55:23 -0500 [thread overview]
Message-ID: <20210111185523.GD1091932@bfoster> (raw)
In-Reply-To: <20210111161212.1414034-2-hch@lst.de>
On Mon, Jan 11, 2021 at 05:12:10PM +0100, Christoph Hellwig wrote:
> Add a helper to factor out the nowait locking logical for the read/write
> helpers.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
Reviewed-by: Brian Foster <bfoster@redhat.com>
> fs/xfs/xfs_file.c | 55 +++++++++++++++++++++++++----------------------
> 1 file changed, 29 insertions(+), 26 deletions(-)
>
> diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
> index ba02780dee6439..aa3fe89628f0f1 100644
> --- a/fs/xfs/xfs_file.c
> +++ b/fs/xfs/xfs_file.c
> @@ -217,6 +217,23 @@ xfs_file_fsync(
> return error;
> }
>
> +static int
> +xfs_ilock_iocb(
> + struct kiocb *iocb,
> + unsigned int lock_mode)
> +{
> + struct xfs_inode *ip = XFS_I(file_inode(iocb->ki_filp));
> +
> + if (iocb->ki_flags & IOCB_NOWAIT) {
> + if (!xfs_ilock_nowait(ip, lock_mode))
> + return -EAGAIN;
> + } else {
> + xfs_ilock(ip, lock_mode);
> + }
> +
> + return 0;
> +}
> +
> STATIC ssize_t
> xfs_file_dio_aio_read(
> struct kiocb *iocb,
> @@ -233,12 +250,9 @@ xfs_file_dio_aio_read(
>
> file_accessed(iocb->ki_filp);
>
> - if (iocb->ki_flags & IOCB_NOWAIT) {
> - if (!xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED))
> - return -EAGAIN;
> - } else {
> - xfs_ilock(ip, XFS_IOLOCK_SHARED);
> - }
> + ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED);
> + if (ret)
> + return ret;
> ret = iomap_dio_rw(iocb, to, &xfs_read_iomap_ops, NULL,
> is_sync_kiocb(iocb));
> xfs_iunlock(ip, XFS_IOLOCK_SHARED);
> @@ -260,13 +274,9 @@ xfs_file_dax_read(
> if (!count)
> return 0; /* skip atime */
>
> - if (iocb->ki_flags & IOCB_NOWAIT) {
> - if (!xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED))
> - return -EAGAIN;
> - } else {
> - xfs_ilock(ip, XFS_IOLOCK_SHARED);
> - }
> -
> + ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED);
> + if (ret)
> + return ret;
> ret = dax_iomap_rw(iocb, to, &xfs_read_iomap_ops);
> xfs_iunlock(ip, XFS_IOLOCK_SHARED);
>
> @@ -284,12 +294,9 @@ xfs_file_buffered_aio_read(
>
> trace_xfs_file_buffered_read(ip, iov_iter_count(to), iocb->ki_pos);
>
> - if (iocb->ki_flags & IOCB_NOWAIT) {
> - if (!xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED))
> - return -EAGAIN;
> - } else {
> - xfs_ilock(ip, XFS_IOLOCK_SHARED);
> - }
> + ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED);
> + if (ret)
> + return ret;
> ret = generic_file_read_iter(iocb, to);
> xfs_iunlock(ip, XFS_IOLOCK_SHARED);
>
> @@ -628,13 +635,9 @@ xfs_file_dax_write(
> size_t count;
> loff_t pos;
>
> - if (iocb->ki_flags & IOCB_NOWAIT) {
> - if (!xfs_ilock_nowait(ip, iolock))
> - return -EAGAIN;
> - } else {
> - xfs_ilock(ip, iolock);
> - }
> -
> + ret = xfs_ilock_iocb(iocb, iolock);
> + if (ret)
> + return ret;
> ret = xfs_file_aio_write_checks(iocb, from, &iolock);
> if (ret)
> goto out;
> --
> 2.29.2
>
next prev parent reply other threads:[~2021-01-11 18:57 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-11 16:12 improve sub-block size direct I/O concurrency Christoph Hellwig
2021-01-11 16:12 ` [PATCH 1/3] xfs: factor out a xfs_ilock_iocb helper Christoph Hellwig
2021-01-11 18:55 ` Brian Foster [this message]
2021-01-11 16:12 ` [PATCH 2/3] xfs: make xfs_file_aio_write_checks IOCB_NOWAIT-aware Christoph Hellwig
2021-01-11 18:55 ` Brian Foster
2021-01-11 16:12 ` [PATCH 3/3] xfs: try to avoid the iolock exclusive for non-aligned direct writes Christoph Hellwig
2021-01-11 18:59 ` Brian Foster
2021-01-11 19:14 ` Christoph Hellwig
2021-01-11 19:49 ` Brian Foster
2021-01-11 20:52 ` Dave Chinner
2021-01-11 20:45 ` improve sub-block size direct I/O concurrency Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210111185523.GD1091932@bfoster \
--to=bfoster@redhat.com \
--cc=avi@scylladb.com \
--cc=hch@lst.de \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox