From: "Darrick J. Wong" <djwong@kernel.org>
To: sandeen@sandeen.net
Cc: linux-xfs@vger.kernel.org, Brian Foster <bfoster@redhat.com>
Subject: Re: [PATCH v2.1 2/2] xfs_repair: clear the needsrepair flag
Date: Tue, 19 Jan 2021 20:31:28 -0800 [thread overview]
Message-ID: <20210120043128.GX3134581@magnolia> (raw)
In-Reply-To: <161076029319.3386490.2011901341184065451.stgit@magnolia>
From: Darrick J. Wong <djwong@kernel.org>
Clear the needsrepair flag, since it's used to prevent mounting of an
inconsistent filesystem.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
---
v2.1: only remove needsrepair at the end of the xfs_repair run
---
include/xfs_mount.h | 1 +
libxfs/init.c | 2 +-
| 55 +++++++++++++++++++++++++++++++++++++++++++++++++++
| 2 ++
repair/xfs_repair.c | 4 +++-
5 files changed, 62 insertions(+), 2 deletions(-)
diff --git a/include/xfs_mount.h b/include/xfs_mount.h
index 36594643..75230ca5 100644
--- a/include/xfs_mount.h
+++ b/include/xfs_mount.h
@@ -181,6 +181,7 @@ xfs_perag_resv(
extern xfs_mount_t *libxfs_mount (xfs_mount_t *, xfs_sb_t *,
dev_t, dev_t, dev_t, int);
+int libxfs_flush_mount(struct xfs_mount *mp);
int libxfs_umount(struct xfs_mount *mp);
extern void libxfs_rtmount_destroy (xfs_mount_t *);
diff --git a/libxfs/init.c b/libxfs/init.c
index 9fe13b8d..083060bf 100644
--- a/libxfs/init.c
+++ b/libxfs/init.c
@@ -870,7 +870,7 @@ _("%s: Flushing the %s failed, err=%d!\n"),
* Flush all dirty buffers to stable storage and report on writes that didn't
* make it to stable storage.
*/
-static int
+int
libxfs_flush_mount(
struct xfs_mount *mp)
{
--git a/repair/agheader.c b/repair/agheader.c
index 8bb99489..56a7f45c 100644
--- a/repair/agheader.c
+++ b/repair/agheader.c
@@ -220,6 +220,40 @@ compare_sb(xfs_mount_t *mp, xfs_sb_t *sb)
return(XR_OK);
}
+/* Clear needsrepair after a successful repair run. */
+int
+clear_needsrepair(
+ struct xfs_mount *mp)
+{
+ struct xfs_buf *bp;
+ int error;
+
+ if (!xfs_sb_version_needsrepair(&mp->m_sb) || no_modify)
+ return 0;
+
+ /* We must succeed at flushing all dirty buffers to disk. */
+ error = -libxfs_flush_mount(mp);
+ if (error)
+ return error;
+
+ /* Clear needsrepair from the superblock. */
+ bp = libxfs_getsb(mp);
+ if (!bp)
+ return ENOMEM;
+ if (bp->b_error) {
+ error = bp->b_error;
+ libxfs_buf_relse(bp);
+ return -error;
+ }
+
+ mp->m_sb.sb_features_incompat &= ~XFS_SB_FEAT_INCOMPAT_NEEDSREPAIR;
+
+ libxfs_sb_to_disk(bp->b_addr, &mp->m_sb);
+ libxfs_buf_mark_dirty(bp);
+ libxfs_buf_relse(bp);
+ return 0;
+}
+
/*
* Possible fields that may have been set at mkfs time,
* sb_inoalignmt, sb_unit, sb_width and sb_dirblklog.
@@ -452,6 +486,27 @@ secondary_sb_whack(
rval |= XR_AG_SB_SEC;
}
+ if (xfs_sb_version_needsrepair(sb)) {
+ if (!no_modify)
+ sb->sb_features_incompat &=
+ ~XFS_SB_FEAT_INCOMPAT_NEEDSREPAIR;
+ if (i == 0) {
+ if (!no_modify)
+ do_warn(
+ _("clearing needsrepair flag and regenerating metadata\n"));
+ else
+ do_warn(
+ _("would clear needsrepair flag and regenerate metadata\n"));
+ } else {
+ /*
+ * Quietly clear needsrepair on the secondary supers as
+ * part of ensuring them. If needsrepair is set on the
+ * primary, it will be done at the very end of repair.
+ */
+ rval |= XR_AG_SB_SEC;
+ }
+ }
+
return(rval);
}
--git a/repair/agheader.h b/repair/agheader.h
index a63827c8..552c1f70 100644
--- a/repair/agheader.h
+++ b/repair/agheader.h
@@ -82,3 +82,5 @@ typedef struct fs_geo_list {
#define XR_AG_AGF 0x2
#define XR_AG_AGI 0x4
#define XR_AG_SB_SEC 0x8
+
+int clear_needsrepair(struct xfs_mount *mp);
diff --git a/repair/xfs_repair.c b/repair/xfs_repair.c
index 9409f0d8..d36c5a21 100644
--- a/repair/xfs_repair.c
+++ b/repair/xfs_repair.c
@@ -1133,7 +1133,9 @@ _("Note - stripe unit (%d) and width (%d) were copied from a backup superblock.\
format_log_max_lsn(mp);
/* Report failure if anything failed to get written to our fs. */
- error = -libxfs_umount(mp);
+ error = clear_needsrepair(mp);
+ if (!error)
+ error = -libxfs_umount(mp);
if (error)
do_error(
_("File system metadata writeout failed, err=%d. Re-run xfs_repair.\n"),
next prev parent reply other threads:[~2021-01-20 4:32 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-16 1:24 [PATCHSET v2 0/2] xfs: add the ability to flag a fs for repair Darrick J. Wong
2021-01-16 1:24 ` [PATCH 1/2] xfs_db: support the needsrepair feature flag in the version command Darrick J. Wong
2021-01-19 14:37 ` Brian Foster
2021-02-02 21:09 ` Darrick J. Wong
2021-02-03 13:07 ` Brian Foster
2021-02-03 18:30 ` Darrick J. Wong
2021-02-03 19:09 ` Brian Foster
2021-01-16 1:24 ` [PATCH 2/2] xfs_repair: clear the needsrepair flag Darrick J. Wong
2021-01-19 14:37 ` Brian Foster
2021-01-19 18:15 ` Darrick J. Wong
2021-01-19 19:44 ` Brian Foster
2021-01-19 20:31 ` Darrick J. Wong
2021-01-19 23:49 ` Darrick J. Wong
2021-01-20 4:31 ` Darrick J. Wong [this message]
2021-01-20 17:38 ` [PATCH v2.1 " Brian Foster
2021-02-02 22:22 ` Darrick J. Wong
2021-01-20 4:31 ` [PATCH 3/2] xfs_repair: fix unmount error message to have a newline Darrick J. Wong
2021-01-20 17:38 ` Brian Foster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210120043128.GX3134581@magnolia \
--to=djwong@kernel.org \
--cc=bfoster@redhat.com \
--cc=linux-xfs@vger.kernel.org \
--cc=sandeen@sandeen.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox