From: Allison Henderson <allison.henderson@oracle.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH v22 21/27] RFC xfsprogs: Skip flip flags for delayed attrs
Date: Mon, 26 Jul 2021 23:18:58 -0700 [thread overview]
Message-ID: <20210727061904.11084-22-allison.henderson@oracle.com> (raw)
In-Reply-To: <20210727061904.11084-1-allison.henderson@oracle.com>
Source kernel commit: 2b1c81a8c3f453ba16b6db8dae256723bf53c051
This is a clean up patch that skips the flip flag logic for delayed attr
renames. Since the log replay keeps the inode locked, we do not need to
worry about race windows with attr lookups. So we can skip over
flipping the flag and the extra transaction roll for it
RFC: In the last review, folks asked for some performance analysis, so I
did a few perf captures with and with out this patch. What I found was
that there wasnt very much difference at all between having the patch or
not having it. Of the time we do spend in the affected code, the
percentage is small. Most of the time we spend about %0.03 of the time
in this function, with or with out the patch. Occasionally we get a
0.02%, though not often. So I think this starts to challenge needing
this patch at all. This patch was requested some number of reviews ago,
be perhaps in light of the findings, it may no longer be of interest.
0.03% 0.00% fsstress [xfs] [k] xfs_attr_set_iter
Keep it or drop it?
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
libxfs/xfs_attr.c | 51 +++++++++++++++++++++++++++++---------------------
libxfs/xfs_attr_leaf.c | 3 ++-
2 files changed, 32 insertions(+), 22 deletions(-)
diff --git a/libxfs/xfs_attr.c b/libxfs/xfs_attr.c
index 70665d9..9967719 100644
--- a/libxfs/xfs_attr.c
+++ b/libxfs/xfs_attr.c
@@ -354,6 +354,7 @@ xfs_attr_set_iter(
struct xfs_inode *dp = args->dp;
struct xfs_buf *bp = NULL;
int forkoff, error = 0;
+ struct xfs_mount *mp = args->dp->i_mount;
/* State machine switch */
switch (dac->dela_state) {
@@ -475,16 +476,21 @@ xfs_attr_set_iter(
* In a separate transaction, set the incomplete flag on the
* "old" attr and clear the incomplete flag on the "new" attr.
*/
- error = xfs_attr3_leaf_flipflags(args);
- if (error)
- return error;
- /*
- * Commit the flag value change and start the next trans in
- * series.
- */
- dac->dela_state = XFS_DAS_FLIP_LFLAG;
- trace_xfs_attr_set_iter_return(dac->dela_state, args->dp);
- return -EAGAIN;
+ if (!xfs_hasdelattr(mp)) {
+ error = xfs_attr3_leaf_flipflags(args);
+ if (error)
+ return error;
+ /*
+ * Commit the flag value change and start the next trans
+ * in series.
+ */
+ dac->dela_state = XFS_DAS_FLIP_LFLAG;
+ trace_xfs_attr_set_iter_return(dac->dela_state,
+ args->dp);
+ return -EAGAIN;
+ }
+
+ /* fallthrough */
case XFS_DAS_FLIP_LFLAG:
/*
* Dismantle the "old" attribute/value pair by removing a
@@ -586,17 +592,21 @@ xfs_attr_set_iter(
* In a separate transaction, set the incomplete flag on the
* "old" attr and clear the incomplete flag on the "new" attr.
*/
- error = xfs_attr3_leaf_flipflags(args);
- if (error)
- goto out;
- /*
- * Commit the flag value change and start the next trans in
- * series
- */
- dac->dela_state = XFS_DAS_FLIP_NFLAG;
- trace_xfs_attr_set_iter_return(dac->dela_state, args->dp);
- return -EAGAIN;
+ if (!xfs_hasdelattr(mp)) {
+ error = xfs_attr3_leaf_flipflags(args);
+ if (error)
+ goto out;
+ /*
+ * Commit the flag value change and start the next trans
+ * in series
+ */
+ dac->dela_state = XFS_DAS_FLIP_NFLAG;
+ trace_xfs_attr_set_iter_return(dac->dela_state,
+ args->dp);
+ return -EAGAIN;
+ }
+ /* fallthrough */
case XFS_DAS_FLIP_NFLAG:
/*
* Dismantle the "old" attribute/value pair by removing a
@@ -1240,7 +1250,6 @@ xfs_attr_node_addname_clear_incomplete(
* Re-find the "old" attribute entry after any split ops. The INCOMPLETE
* flag means that we will find the "old" attr, not the "new" one.
*/
- args->attr_filter |= XFS_ATTR_INCOMPLETE;
state = xfs_da_state_alloc(args);
state->inleaf = 0;
error = xfs_da3_node_lookup_int(state, &retval);
diff --git a/libxfs/xfs_attr_leaf.c b/libxfs/xfs_attr_leaf.c
index e23fc3d..056f4eb 100644
--- a/libxfs/xfs_attr_leaf.c
+++ b/libxfs/xfs_attr_leaf.c
@@ -1478,7 +1478,8 @@ xfs_attr3_leaf_add_work(
if (tmp)
entry->flags |= XFS_ATTR_LOCAL;
if (args->op_flags & XFS_DA_OP_RENAME) {
- entry->flags |= XFS_ATTR_INCOMPLETE;
+ if (!xfs_hasdelattr(mp))
+ entry->flags |= XFS_ATTR_INCOMPLETE;
if ((args->blkno2 == args->blkno) &&
(args->index2 <= args->index)) {
args->index2++;
--
2.7.4
next prev parent reply other threads:[~2021-07-27 6:20 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-27 6:18 [PATCH v22 00/27] Delayed Attributes Allison Henderson
2021-07-27 6:18 ` [PATCH v22 01/27] xfsprogs: Reverse apply 72b97ea40d Allison Henderson
2021-07-27 6:18 ` [PATCH v22 02/27] xfsprogs: Add xfs_attr_node_remove_name Allison Henderson
2021-07-27 6:18 ` [PATCH v22 03/27] xfsprogs: Refactor xfs_attr_set_shortform Allison Henderson
2021-07-27 6:18 ` [PATCH v22 04/27] xfsprogs: Separate xfs_attr_node_addname and xfs_attr_node_addname_clear_incomplete Allison Henderson
2021-07-27 6:18 ` [PATCH v22 05/27] xfsprogs: Add helper xfs_attr_node_addname_find_attr Allison Henderson
2021-07-27 6:18 ` [PATCH v22 06/27] xfsprogs: Hoist xfs_attr_node_addname Allison Henderson
2021-07-27 6:18 ` [PATCH v22 07/27] xfsprogs: Hoist xfs_attr_leaf_addname Allison Henderson
2021-07-27 6:18 ` [PATCH v22 08/27] xfsprogs: Hoist node transaction handling Allison Henderson
2021-07-27 6:18 ` [PATCH v22 09/27] xfsprogs: Add delay ready attr remove routines Allison Henderson
2021-07-27 6:18 ` [PATCH v22 10/27] xfsprogs: Add delay ready attr set routines Allison Henderson
2021-07-27 6:18 ` [PATCH v22 11/27] xfsprogs: Remove xfs_attr_rmtval_set Allison Henderson
2021-07-27 6:18 ` [PATCH v22 12/27] xfsprogs: Clean up xfs_attr_node_addname_clear_incomplete Allison Henderson
2021-07-27 6:18 ` [PATCH v22 13/27] xfsprogs: Fix default ASSERT in xfs_attr_set_iter Allison Henderson
2021-07-27 6:18 ` [PATCH v22 14/27] xfsprogs: Make attr name schemes consistent Allison Henderson
2021-07-27 6:18 ` [PATCH v22 15/27] xfs: allow setting and clearing of log incompat feature flags Allison Henderson
2021-07-27 6:18 ` [PATCH v22 16/27] xfsprogs: Return from xfs_attr_set_iter if there are no more rmtblks to process Allison Henderson
2021-07-27 6:18 ` [PATCH v22 17/27] xfsprogs: Add state machine tracepoints Allison Henderson
2021-07-27 6:18 ` [PATCH v22 18/27] xfsprogs: Rename __xfs_attr_rmtval_remove Allison Henderson
2021-07-27 6:18 ` [PATCH v22 19/27] xfsprogs: Set up infrastructure for deferred attribute operations Allison Henderson
2021-07-27 6:18 ` [PATCH v22 20/27] xfsprogs: Implement attr logging and replay Allison Henderson
2021-07-27 6:18 ` Allison Henderson [this message]
2021-07-27 6:18 ` [PATCH v22 22/27] xfsprogs: Add xfs_attr_set_deferred and xfs_attr_remove_deferred Allison Henderson
2021-07-27 6:19 ` [PATCH v22 23/27] xfsprogs: Remove unused xfs_attr_*_args Allison Henderson
2021-07-27 6:19 ` [PATCH v22 24/27] xfsprogs: Add delayed attributes error tag Allison Henderson
2021-07-27 6:19 ` [PATCH v22 25/27] xfsprogs: Merge xfs_delattr_context into xfs_attr_item Allison Henderson
2021-07-27 6:19 ` [PATCH v22 26/27] xfsprogs: Add helper function xfs_attr_leaf_addname Allison Henderson
2021-07-27 6:19 ` [PATCH v22 27/27] xfsprogs: Add log item printing for ATTRI and ATTRD Allison Henderson
2021-07-28 19:41 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210727061904.11084-22-allison.henderson@oracle.com \
--to=allison.henderson@oracle.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox