From: Pavel Reichl <preichl@redhat.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH v2 18/29] xfsprogs: Stop using platform_findsizes()
Date: Fri, 6 Aug 2021 23:23:07 +0200 [thread overview]
Message-ID: <20210806212318.440144-19-preichl@redhat.com> (raw)
In-Reply-To: <20210806212318.440144-1-preichl@redhat.com>
---
libfrog/linux.c | 8 +++++++-
libfrog/platform.h | 2 +-
libfrog/topology.c | 6 +++---
libxfs/init.c | 12 ++++++------
4 files changed, 17 insertions(+), 11 deletions(-)
diff --git a/libfrog/linux.c b/libfrog/linux.c
index 3e4f2291..891373c6 100644
--- a/libfrog/linux.c
+++ b/libfrog/linux.c
@@ -192,7 +192,7 @@ platform_flush_device(
}
void
-platform_findsizes(char *path, int fd, long long *sz, int *bsz)
+findsizes(char *path, int fd, long long *sz, int *bsz)
{
struct stat st;
uint64_t size;
@@ -251,6 +251,12 @@ platform_findsizes(char *path, int fd, long long *sz, int *bsz)
max_block_alignment = *bsz;
}
+void
+platform_findsizes(char *path, int fd, long long *sz, int *bsz)
+{
+ findsizes(path, fd, sz, bsz);
+}
+
char *
platform_findrawpath(char *path)
{
diff --git a/libfrog/platform.h b/libfrog/platform.h
index 1705c1c9..914da2c7 100644
--- a/libfrog/platform.h
+++ b/libfrog/platform.h
@@ -21,8 +21,8 @@ int platform_direct_blockdev(void);
int platform_align_blockdev(void);
unsigned long platform_physmem(void); /* in kilobytes */
void platform_findsizes(char *path, int fd, long long *sz, int *bsz);
+void findsizes(char *path, int fd, long long *sz, int *bsz);
int platform_nproc(void);
-void platform_findsizes(char *path, int fd, long long *sz, int *bsz);
#endif /* __LIBFROG_PLATFORM_H__ */
diff --git a/libfrog/topology.c b/libfrog/topology.c
index b1b470c9..a21ba6c6 100644
--- a/libfrog/topology.c
+++ b/libfrog/topology.c
@@ -117,7 +117,7 @@ check_overwrite(
fd = open(device, O_RDONLY);
if (fd < 0)
goto out;
- platform_findsizes((char *)device, fd, &size, &bsz);
+ findsizes((char *)device, fd, &size, &bsz);
close(fd);
/* nothing to overwrite on a 0-length device */
@@ -296,7 +296,7 @@ void get_topology(
char *dfile = xi->volname ? xi->volname : xi->dname;
/*
- * If our target is a regular file, use platform_findsizes
+ * If our target is a regular file, use findsizes
* to try to obtain the underlying filesystem's requirements
* for direct IO; we'll set our sector size to that if possible.
*/
@@ -312,7 +312,7 @@ void get_topology(
fd = open(dfile, flags, 0666);
if (fd >= 0) {
- platform_findsizes(dfile, fd, &dummy, &ft->lsectorsize);
+ findsizes(dfile, fd, &dummy, &ft->lsectorsize);
close(fd);
ft->psectorsize = ft->lsectorsize;
} else
diff --git a/libxfs/init.c b/libxfs/init.c
index 784f15e2..7bc3b59d 100644
--- a/libxfs/init.c
+++ b/libxfs/init.c
@@ -324,7 +324,7 @@ libxfs_init(libxfs_init_t *a)
a->ddev= libxfs_device_open(dname, a->dcreat, flags,
a->setblksize);
a->dfd = libxfs_device_to_fd(a->ddev);
- platform_findsizes(dname, a->dfd, &a->dsize,
+ findsizes(dname, a->dfd, &a->dsize,
&a->dbsize);
} else {
if (!check_open(dname, flags, &rawfile, &blockfile))
@@ -332,7 +332,7 @@ libxfs_init(libxfs_init_t *a)
a->ddev = libxfs_device_open(rawfile,
a->dcreat, flags, a->setblksize);
a->dfd = libxfs_device_to_fd(a->ddev);
- platform_findsizes(rawfile, a->dfd,
+ findsizes(rawfile, a->dfd,
&a->dsize, &a->dbsize);
}
} else
@@ -342,7 +342,7 @@ libxfs_init(libxfs_init_t *a)
a->logdev = libxfs_device_open(logname,
a->lcreat, flags, a->setblksize);
a->logfd = libxfs_device_to_fd(a->logdev);
- platform_findsizes(dname, a->logfd, &a->logBBsize,
+ findsizes(dname, a->logfd, &a->logBBsize,
&a->lbsize);
} else {
if (!check_open(logname, flags, &rawfile, &blockfile))
@@ -350,7 +350,7 @@ libxfs_init(libxfs_init_t *a)
a->logdev = libxfs_device_open(rawfile,
a->lcreat, flags, a->setblksize);
a->logfd = libxfs_device_to_fd(a->logdev);
- platform_findsizes(rawfile, a->logfd,
+ findsizes(rawfile, a->logfd,
&a->logBBsize, &a->lbsize);
}
} else
@@ -360,7 +360,7 @@ libxfs_init(libxfs_init_t *a)
a->rtdev = libxfs_device_open(rtname,
a->rcreat, flags, a->setblksize);
a->rtfd = libxfs_device_to_fd(a->rtdev);
- platform_findsizes(dname, a->rtfd, &a->rtsize,
+ findsizes(dname, a->rtfd, &a->rtsize,
&a->rtbsize);
} else {
if (!check_open(rtname, flags, &rawfile, &blockfile))
@@ -368,7 +368,7 @@ libxfs_init(libxfs_init_t *a)
a->rtdev = libxfs_device_open(rawfile,
a->rcreat, flags, a->setblksize);
a->rtfd = libxfs_device_to_fd(a->rtdev);
- platform_findsizes(rawfile, a->rtfd,
+ findsizes(rawfile, a->rtfd,
&a->rtsize, &a->rtbsize);
}
} else
--
2.31.1
next prev parent reply other threads:[~2021-08-06 21:23 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-06 21:22 [PATCH v2 00/29] xfsprogs: Drop the 'platform_' prefix Pavel Reichl
2021-08-06 21:22 ` [PATCH v2 01/29] xfsprogs: Stop using platform_uuid_compare() Pavel Reichl
2021-08-06 21:22 ` [PATCH v2 02/29] xfsprogs: Stop using platform_test_xfs_fd() Pavel Reichl
2021-08-06 21:22 ` [PATCH v2 03/29] xfsprogs: Stop using platform_test_xfs_path() Pavel Reichl
2021-08-06 21:22 ` [PATCH v2 04/29] xfsprogs: Stop using platform_fstatfs() Pavel Reichl
2021-08-06 21:22 ` [PATCH v2 05/29] xfsprogs: Stop using platform_getoptreset() Pavel Reichl
2021-08-06 21:22 ` [PATCH v2 06/29] xfsprogs: Stop using platform_uuid_copy() Pavel Reichl
2021-08-06 21:22 ` [PATCH v2 07/29] xfsprogs: Stop using platform_uuid_generate() Pavel Reichl
2021-08-06 21:22 ` [PATCH v2 08/29] xfsprogs: Stop using platform_uuid_unparse() Pavel Reichl
2021-08-06 21:22 ` [PATCH v2 09/29] xfsprogs: Stop using platform_uuid_clear() Pavel Reichl
2021-08-06 21:22 ` [PATCH v2 10/29] xfsprogs: Stop using platform_uuid_parse() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 11/29] xfsprogs: Stop using platform_uuid_is_null() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 12/29] xfsprogs: Stop using platform_check_mount() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 13/29] xfsprogs: Stop using platform_check_ismounted() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 14/29] xfsprogs: Stop using platform_flush_device() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 15/29] xfsprogs: Stop using platform_mntent_open() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 16/29] xfsprogs: Stop using platform_mntent_next() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 17/29] xfsprogs: Stop using platform_mntent_close() Pavel Reichl
2021-08-06 21:23 ` Pavel Reichl [this message]
2021-08-06 21:23 ` [PATCH v2 19/29] xfsprogs: Stop using platform_discard_blocks Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 20/29] xfsprogs: Stop using platform_zero_range() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 21/29] xfsprogs: Stop using platform_crash() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 22/29] xfsprogs: Stop using platform_nproc() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 23/29] xfsprogs: Stop using platform_check_iswritable() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 24/29] xfsprogs: Stop using platform_set_blocksize() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 25/29] xfsprogs: Stop using platform_findrawpath() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 26/29] xfsprogs: Stop using platform_findblockpath() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 27/29] xfsprogs: Stop using platform_direct_blockdev() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 28/29] xfsprogs: Stop using platform_align_blockdev() Pavel Reichl
2021-08-06 21:23 ` [PATCH v2 29/29] xfsprogs: Stop using platform_physmem() Pavel Reichl
2021-08-06 23:05 ` [PATCH v2 00/29] xfsprogs: Drop the 'platform_' prefix Dave Chinner
2021-08-07 15:13 ` Pavel Reichl
2021-08-07 21:46 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210806212318.440144-19-preichl@redhat.com \
--to=preichl@redhat.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox