From: Dave Chinner <david@fromorbit.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH 04/16] xfs: embed the xlog_op_header in the commit record
Date: Fri, 19 Nov 2021 10:13:40 +1100 [thread overview]
Message-ID: <20211118231352.2051947-5-david@fromorbit.com> (raw)
In-Reply-To: <20211118231352.2051947-1-david@fromorbit.com>
Remove the final case where xlog_write() has to prepend an opheader
to a log transaction. Similar to the start record, the commit record
is just an empty opheader with a XLOG_COMMIT_TRANS type, so we can
just make this the payload for the region being passed to
xlog_write() and remove the special handling in xlog_write() for
the commit record.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
fs/xfs/xfs_log.c | 22 ++++++----------------
fs/xfs/xfs_log_cil.c | 11 +++++++++--
2 files changed, 15 insertions(+), 18 deletions(-)
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index e5515d0c85c4..f789acd2f755 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -2281,11 +2281,10 @@ xlog_write_calc_vec_length(
/* Don't account for regions with embedded ophdrs */
if (optype && headers > 0) {
- if (optype & XLOG_UNMOUNT_TRANS)
- headers--;
+ headers--;
if (optype & XLOG_START_TRANS) {
- ASSERT(headers >= 2);
- headers -= 2;
+ ASSERT(headers >= 1);
+ headers--;
}
}
@@ -2486,14 +2485,6 @@ xlog_write(
int data_cnt = 0;
int error = 0;
- /*
- * If this is a commit or unmount transaction, we don't need a start
- * record to be written. We do, however, have to account for the commit
- * header that gets written. Hence we always have to account for an
- * extra xlog_op_header here for commit records.
- */
- if (optype & XLOG_COMMIT_TRANS)
- ticket->t_curr_res -= sizeof(struct xlog_op_header);
if (ticket->t_curr_res < 0) {
xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
"ctx ticket reservation ran out. Need to up reservation");
@@ -2550,14 +2541,13 @@ xlog_write(
/*
* The XLOG_START_TRANS has embedded ophdrs for the
* start record and transaction header. They will always
- * be the first two regions in the lv chain.
+ * be the first two regions in the lv chain. Commit and
+ * unmount records also have embedded ophdrs.
*/
- if (optype & XLOG_START_TRANS) {
+ if (optype) {
ophdr = reg->i_addr;
if (index)
optype &= ~XLOG_START_TRANS;
- } else if (optype & XLOG_UNMOUNT_TRANS) {
- ophdr = reg->i_addr;
} else {
ophdr = xlog_write_setup_ophdr(log, ptr,
ticket, optype);
diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
index 9a810a2c92e9..2c4fb55d4897 100644
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -810,9 +810,14 @@ xlog_cil_write_commit_record(
struct xfs_cil_ctx *ctx)
{
struct xlog *log = ctx->cil->xc_log;
+ struct xlog_op_header ophdr = {
+ .oh_clientid = XFS_TRANSACTION,
+ .oh_tid = cpu_to_be32(ctx->ticket->t_tid),
+ .oh_flags = XLOG_COMMIT_TRANS,
+ };
struct xfs_log_iovec reg = {
- .i_addr = NULL,
- .i_len = 0,
+ .i_addr = &ophdr,
+ .i_len = sizeof(struct xlog_op_header),
.i_type = XLOG_REG_TYPE_COMMIT,
};
struct xfs_log_vec vec = {
@@ -828,6 +833,8 @@ xlog_cil_write_commit_record(
if (error)
return error;
+ /* account for space used by record data */
+ ctx->ticket->t_curr_res -= reg.i_len;
error = xlog_write(log, ctx, &vec, ctx->ticket, XLOG_COMMIT_TRANS);
if (error)
xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
--
2.33.0
next prev parent reply other threads:[~2021-11-18 23:13 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-18 23:13 [PATCH 00/16 v7] xfs: rework xlog_write() Dave Chinner
2021-11-18 23:13 ` [PATCH 01/16] xfs: factor out the CIL transaction header building Dave Chinner
2021-11-22 10:48 ` Chandan Babu R
2021-11-18 23:13 ` [PATCH 02/16] xfs: only CIL pushes require a start record Dave Chinner
2021-11-22 11:29 ` Chandan Babu R
2021-11-18 23:13 ` [PATCH 03/16] xfs: embed the xlog_op_header in the unmount record Dave Chinner
2021-11-22 11:30 ` Chandan Babu R
2021-11-18 23:13 ` Dave Chinner [this message]
2021-11-22 11:31 ` [PATCH 04/16] xfs: embed the xlog_op_header in the commit record Chandan Babu R
2021-11-18 23:13 ` [PATCH 05/16] xfs: log tickets don't need log client id Dave Chinner
2021-11-22 11:37 ` Chandan Babu R
2021-11-18 23:13 ` [PATCH 06/16] xfs: move log iovec alignment to preparation function Dave Chinner
2021-11-22 11:37 ` Chandan Babu R
2021-11-18 23:13 ` [PATCH 07/16] xfs: reserve space and initialise xlog_op_header in item formatting Dave Chinner
2021-11-22 11:39 ` Chandan Babu R
2021-11-18 23:13 ` [PATCH 08/16] xfs: log ticket region debug is largely useless Dave Chinner
2021-11-22 11:39 ` Chandan Babu R
2021-11-18 23:13 ` [PATCH 09/16] xfs: pass lv chain length into xlog_write() Dave Chinner
2021-11-22 11:39 ` Chandan Babu R
2021-11-18 23:13 ` [PATCH 10/16] xfs: change the type of ic_datap Dave Chinner
2021-11-18 23:13 ` [PATCH 11/16] xfs: introduce xlog_write_full() Dave Chinner
2021-11-22 11:40 ` Chandan Babu R
2021-11-18 23:13 ` [PATCH 12/16] xfs: introduce xlog_write_partial() Dave Chinner
2021-11-23 16:13 ` Chandan Babu R
2021-11-23 21:47 ` Darrick J. Wong
2021-11-18 23:13 ` [PATCH 13/16] xfs: remove xlog_verify_dest_ptr Dave Chinner
2021-11-18 23:13 ` [PATCH 14/16] xfs: xlog_write() no longer needs contwr state Dave Chinner
2021-11-24 8:54 ` Chandan Babu R
2021-11-18 23:13 ` [PATCH 15/16] xfs: xlog_write() doesn't need optype anymore Dave Chinner
2021-11-24 8:55 ` Chandan Babu R
2021-11-18 23:13 ` [PATCH 16/16] xfs: CIL context doesn't need to count iovecs Dave Chinner
2021-11-24 8:55 ` Chandan Babu R
-- strict thread matches above, loose matches on Subject: below --
2022-03-09 5:29 [PATCH 00/16 v8] xfs: rework xlog_write() Dave Chinner
2022-03-09 5:29 ` [PATCH 04/16] xfs: embed the xlog_op_header in the commit record Dave Chinner
2021-11-09 1:50 [PATCH 00/16 v6] xfs: rework xlog_write() Dave Chinner
2021-11-09 1:50 ` [PATCH 04/16] xfs: embed the xlog_op_header in the commit record Dave Chinner
2021-11-11 8:00 ` Christoph Hellwig
2021-11-18 4:43 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211118231352.2051947-5-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).