From: Dave Chinner <david@fromorbit.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH 36/50] xfs: convert trim to use for_each_perag_range
Date: Sat, 11 Jun 2022 11:26:45 +1000 [thread overview]
Message-ID: <20220611012659.3418072-37-david@fromorbit.com> (raw)
In-Reply-To: <20220611012659.3418072-1-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
To convert it to using active perag references and hence make it
shrink safe.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
fs/xfs/xfs_discard.c | 50 ++++++++++++++++++++------------------------
1 file changed, 23 insertions(+), 27 deletions(-)
diff --git a/fs/xfs/xfs_discard.c b/fs/xfs/xfs_discard.c
index bfc829c07f03..afc4c78b9eed 100644
--- a/fs/xfs/xfs_discard.c
+++ b/fs/xfs/xfs_discard.c
@@ -21,23 +21,20 @@
STATIC int
xfs_trim_extents(
- struct xfs_mount *mp,
- xfs_agnumber_t agno,
+ struct xfs_perag *pag,
xfs_daddr_t start,
xfs_daddr_t end,
xfs_daddr_t minlen,
uint64_t *blocks_trimmed)
{
+ struct xfs_mount *mp = pag->pag_mount;
struct block_device *bdev = mp->m_ddev_targp->bt_bdev;
struct xfs_btree_cur *cur;
struct xfs_buf *agbp;
struct xfs_agf *agf;
- struct xfs_perag *pag;
int error;
int i;
- pag = xfs_perag_get(mp, agno);
-
/*
* Force out the log. This means any transactions that might have freed
* space before we take the AGF buffer lock are now on disk, and the
@@ -47,7 +44,7 @@ xfs_trim_extents(
error = xfs_alloc_read_agf(pag, NULL, 0, &agbp);
if (error)
- goto out_put_perag;
+ return error;
agf = agbp->b_addr;
cur = xfs_allocbt_init_cursor(mp, NULL, agbp, pag, XFS_BTNUM_CNT);
@@ -71,10 +68,10 @@ xfs_trim_extents(
error = xfs_alloc_get_rec(cur, &fbno, &flen, &i);
if (error)
- goto out_del_cursor;
+ break;
if (XFS_IS_CORRUPT(mp, i != 1)) {
error = -EFSCORRUPTED;
- goto out_del_cursor;
+ break;
}
ASSERT(flen <= be32_to_cpu(agf->agf_longest));
@@ -83,15 +80,15 @@ xfs_trim_extents(
* the format the range/len variables are supplied in by
* userspace.
*/
- dbno = XFS_AGB_TO_DADDR(mp, agno, fbno);
+ dbno = XFS_AGB_TO_DADDR(mp, pag->pag_agno, fbno);
dlen = XFS_FSB_TO_BB(mp, flen);
/*
* Too small? Give up.
*/
if (dlen < minlen) {
- trace_xfs_discard_toosmall(mp, agno, fbno, flen);
- goto out_del_cursor;
+ trace_xfs_discard_toosmall(mp, pag->pag_agno, fbno, flen);
+ break;
}
/*
@@ -100,7 +97,7 @@ xfs_trim_extents(
* down partially overlapping ranges for now.
*/
if (dbno + dlen < start || dbno > end) {
- trace_xfs_discard_exclude(mp, agno, fbno, flen);
+ trace_xfs_discard_exclude(mp, pag->pag_agno, fbno, flen);
goto next_extent;
}
@@ -109,32 +106,30 @@ xfs_trim_extents(
* discard and try again the next time.
*/
if (xfs_extent_busy_search(mp, pag, fbno, flen)) {
- trace_xfs_discard_busy(mp, agno, fbno, flen);
+ trace_xfs_discard_busy(mp, pag->pag_agno, fbno, flen);
goto next_extent;
}
- trace_xfs_discard_extent(mp, agno, fbno, flen);
+ trace_xfs_discard_extent(mp, pag->pag_agno, fbno, flen);
error = blkdev_issue_discard(bdev, dbno, dlen, GFP_NOFS);
if (error)
- goto out_del_cursor;
+ break;
*blocks_trimmed += flen;
next_extent:
error = xfs_btree_decrement(cur, 0, &i);
if (error)
- goto out_del_cursor;
+ break;
if (fatal_signal_pending(current)) {
error = -ERESTARTSYS;
- goto out_del_cursor;
+ break;
}
}
out_del_cursor:
xfs_btree_del_cursor(cur, error);
xfs_buf_relse(agbp);
-out_put_perag:
- xfs_perag_put(pag);
return error;
}
@@ -152,11 +147,12 @@ xfs_ioc_trim(
struct xfs_mount *mp,
struct fstrim_range __user *urange)
{
+ struct xfs_perag *pag;
unsigned int granularity =
bdev_discard_granularity(mp->m_ddev_targp->bt_bdev);
struct fstrim_range range;
xfs_daddr_t start, end, minlen;
- xfs_agnumber_t start_agno, end_agno, agno;
+ xfs_agnumber_t agno;
uint64_t blocks_trimmed = 0;
int error, last_error = 0;
@@ -193,18 +189,18 @@ xfs_ioc_trim(
end = start + BTOBBT(range.len) - 1;
if (end > XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks) - 1)
- end = XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)- 1;
-
- start_agno = xfs_daddr_to_agno(mp, start);
- end_agno = xfs_daddr_to_agno(mp, end);
+ end = XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks) - 1;
- for (agno = start_agno; agno <= end_agno; agno++) {
- error = xfs_trim_extents(mp, agno, start, end, minlen,
+ agno = xfs_daddr_to_agno(mp, start);
+ for_each_perag_range(mp, agno, xfs_daddr_to_agno(mp, end), pag) {
+ error = xfs_trim_extents(pag, start, end, minlen,
&blocks_trimmed);
if (error) {
last_error = error;
- if (error == -ERESTARTSYS)
+ if (error == -ERESTARTSYS) {
+ xfs_perag_rele(pag);
break;
+ }
}
}
--
2.35.1
next prev parent reply other threads:[~2022-06-11 1:27 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-11 1:26 [RFC] [PATCH 00/50] xfs: per-ag centric allocation alogrithms Dave Chinner
2022-06-11 1:26 ` [PATCH 01/50] xfs: make last AG grow/shrink perag centric Dave Chinner
2022-06-16 7:30 ` Christoph Hellwig
2022-06-11 1:26 ` [PATCH 02/50] xfs: kill xfs_ialloc_pagi_init() Dave Chinner
2022-06-16 7:32 ` Christoph Hellwig
2022-06-11 1:26 ` [PATCH 03/50] xfs: pass perag to xfs_ialloc_read_agi() Dave Chinner
2022-06-16 7:34 ` Christoph Hellwig
2022-06-11 1:26 ` [PATCH 04/50] xfs: kill xfs_alloc_pagf_init() Dave Chinner
2022-06-16 7:35 ` Christoph Hellwig
2022-06-11 1:26 ` [PATCH 05/50] xfs: pass perag to xfs_alloc_read_agf() Dave Chinner
2022-06-11 2:37 ` kernel test robot
2022-06-11 12:04 ` kernel test robot
2022-06-11 13:46 ` kernel test robot
2022-06-14 12:17 ` kernel test robot
2022-06-16 7:38 ` Christoph Hellwig
2022-06-11 1:26 ` [PATCH 06/50] xfs: pass perag to xfs_read_agi Dave Chinner
2022-06-16 7:39 ` Christoph Hellwig
2022-06-16 7:39 ` Christoph Hellwig
2022-06-11 1:26 ` [PATCH 07/50] xfs: pass perag to xfs_read_agf Dave Chinner
2022-06-16 7:40 ` Christoph Hellwig
2022-06-11 1:26 ` [PATCH 08/50] xfs: pass perag to xfs_alloc_get_freelist Dave Chinner
2022-06-16 7:40 ` Christoph Hellwig
2022-06-11 1:26 ` [PATCH 09/50] xfs: pass perag to xfs_alloc_put_freelist Dave Chinner
2022-06-16 7:40 ` Christoph Hellwig
2022-06-11 1:26 ` [PATCH 10/50] xfs: pass perag to xfs_alloc_read_agfl Dave Chinner
2022-06-16 7:41 ` Christoph Hellwig
2022-06-11 1:26 ` [PATCH 11/50] xfs: Pre-calculate per-AG agbno geometry Dave Chinner
2022-06-11 1:26 ` [PATCH 12/50] xfs: Pre-calculate per-AG agino geometry Dave Chinner
2022-06-11 3:08 ` kernel test robot
2022-06-11 1:26 ` [PATCH 13/50] xfs: replace xfs_ag_block_count() with perag accesses Dave Chinner
2022-06-11 1:26 ` [PATCH 14/50] xfs: make is_log_ag() a first class helper Dave Chinner
2022-06-11 1:26 ` [PATCH 15/50] xfs: active perag reference counting Dave Chinner
2022-06-11 1:26 ` [PATCH 16/50] xfs: rework the perag trace points to be perag centric Dave Chinner
2022-06-11 1:26 ` [PATCH 17/50] xfs: convert xfs_imap() to take a perag Dave Chinner
2022-06-11 1:26 ` [PATCH 18/50] xfs: use active perag references for inode allocation Dave Chinner
2022-06-11 1:26 ` [PATCH 19/50] xfs: inobt can use perags in many more places than it does Dave Chinner
2022-06-11 1:26 ` [PATCH 20/50] xfs: convert xfs_ialloc_next_ag() to an atomic Dave Chinner
2022-06-11 1:26 ` [PATCH 21/50] xfs: perags need atomic operational state Dave Chinner
2022-06-11 1:26 ` [PATCH 22/50] xfs: introduce xfs_for_each_perag_wrap() Dave Chinner
2022-06-11 1:26 ` [PATCH 23/50] xfs: rework xfs_alloc_vextent() Dave Chinner
2022-06-11 1:26 ` [PATCH 24/50] xfs: use xfs_alloc_vextent_this_ag() in _iterate_ags() Dave Chinner
2022-06-11 1:26 ` [PATCH 25/50] xfs: combine __xfs_alloc_vextent_this_ag and xfs_alloc_ag_vextent Dave Chinner
2022-06-11 1:26 ` [PATCH 26/50] xfs: use xfs_alloc_vextent_this_ag() where appropriate Dave Chinner
2022-06-11 1:26 ` [PATCH 27/50] xfs: factor xfs_bmap_btalloc() Dave Chinner
2022-06-11 1:26 ` [PATCH 28/50] xfs: use xfs_alloc_vextent_first_ag() where appropriate Dave Chinner
2022-06-11 1:26 ` [PATCH 29/50] xfs: use xfs_alloc_vextent_start_bno() " Dave Chinner
2022-06-11 1:26 ` [PATCH 30/50] xfs: introduce xfs_alloc_vextent_near_bno() Dave Chinner
2022-06-11 1:26 ` [PATCH 31/50] xfs: introduce xfs_alloc_vextent_exact_bno() Dave Chinner
2022-06-11 1:26 ` [PATCH 32/50] xfs: introduce xfs_alloc_vextent_prepare() Dave Chinner
2022-06-11 1:26 ` [PATCH 33/50] xfs: move allocation accounting to xfs_alloc_vextent_set_fsbno() Dave Chinner
2022-06-11 1:26 ` [PATCH 34/50] xfs: fold xfs_alloc_ag_vextent() into callers Dave Chinner
2022-06-11 1:26 ` [PATCH 35/50] xfs: convert xfs_alloc_vextent_iterate_ags() to use perag walker Dave Chinner
2022-06-11 1:26 ` Dave Chinner [this message]
2022-06-11 1:26 ` [PATCH 37/50] xfs: factor out filestreams from xfs_bmap_btalloc_nullfb Dave Chinner
2022-06-11 1:26 ` [PATCH 38/50] xfs: get rid of notinit from xfs_bmap_longest_free_extent Dave Chinner
2022-06-11 1:26 ` [PATCH 39/50] xfs: use xfs_bmap_longest_free_extent() in filestreams Dave Chinner
2022-06-11 1:26 ` [PATCH 40/50] xfs: move xfs_bmap_btalloc_filestreams() to xfs_filestreams.c Dave Chinner
2022-06-11 1:26 ` [PATCH 41/50] xfs: merge filestream AG lookup into xfs_filestream_select_ag() Dave Chinner
2022-06-11 1:26 ` [PATCH 42/50] xfs: merge new filestream AG selection " Dave Chinner
2022-06-11 1:26 ` [PATCH 43/50] xfs: remove xfs_filestream_select_ag() longest extent check Dave Chinner
2022-06-11 1:26 ` [PATCH 44/50] xfs: factor out MRU hit case in xfs_filestream_select_ag Dave Chinner
2022-06-11 1:26 ` [PATCH 45/50] xfs: track an active perag reference in filestreams Dave Chinner
2022-06-11 1:26 ` [PATCH 46/50] xfs: use for_each_perag_wrap in xfs_filestream_pick_ag Dave Chinner
2022-06-11 1:26 ` [PATCH 47/50] xfs: pass perag to filestreams tracing Dave Chinner
2022-06-11 1:26 ` [PATCH 48/50] xfs: return a referenced perag from filestreams allocator Dave Chinner
2022-06-11 1:26 ` [PATCH 49/50] xfs: refactor the filestreams allocator pick functions Dave Chinner
2022-06-11 1:26 ` [PATCH 50/50] xfs: fix low space alloc deadlock Dave Chinner
2022-06-16 12:01 ` [RFC] [PATCH 00/50] xfs: per-ag centric allocation alogrithms Christoph Hellwig
2022-06-21 2:08 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220611012659.3418072-37-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox