From: Dave Chinner <david@fromorbit.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH 34/42] xfs: merge filestream AG lookup into xfs_filestream_select_ag()
Date: Fri, 10 Feb 2023 09:18:17 +1100 [thread overview]
Message-ID: <20230209221825.3722244-35-david@fromorbit.com> (raw)
In-Reply-To: <20230209221825.3722244-1-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
The lookup currently either returns the cached filestream AG or it
calls xfs_filestreams_select_lengths() to looks up a new AG. This
has verify the AG that is selected, so we end up doing "select a new
AG loop in a couple of places when only one really is needed. Merge
the initial lookup functionality with the length selection so that
we only need to do a single pick loop on lookup or verification
failure.
This undoes a lot of the factoring that enabled the selection to be
moved over to the filestreams code. It makes
xfs_filestream_select_ag() an awful messier, but it has to be made
worse before it can get better in future patches...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
fs/xfs/xfs_filestream.c | 196 ++++++++++++++++------------------------
1 file changed, 76 insertions(+), 120 deletions(-)
diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index a641404aa9a6..23044dab2001 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -258,55 +258,6 @@ xfs_filestream_get_parent(
return dir ? XFS_I(dir) : NULL;
}
-/*
- * Find the right allocation group for a file, either by finding an
- * existing file stream or creating a new one.
- *
- * Returns NULLAGNUMBER in case of an error.
- */
-static xfs_agnumber_t
-xfs_filestream_lookup_ag(
- struct xfs_inode *ip)
-{
- struct xfs_mount *mp = ip->i_mount;
- struct xfs_inode *pip = NULL;
- xfs_agnumber_t startag, ag = NULLAGNUMBER;
- struct xfs_mru_cache_elem *mru;
-
- ASSERT(S_ISREG(VFS_I(ip)->i_mode));
-
- pip = xfs_filestream_get_parent(ip);
- if (!pip)
- return NULLAGNUMBER;
-
- mru = xfs_mru_cache_lookup(mp->m_filestream, pip->i_ino);
- if (mru) {
- ag = container_of(mru, struct xfs_fstrm_item, mru)->ag;
- xfs_mru_cache_done(mp->m_filestream);
-
- trace_xfs_filestream_lookup(mp, ip->i_ino, ag);
- goto out;
- }
-
- /*
- * Set the starting AG using the rotor for inode32, otherwise
- * use the directory inode's AG.
- */
- if (xfs_is_inode32(mp)) {
- xfs_agnumber_t rotorstep = xfs_rotorstep;
- startag = (mp->m_agfrotor / rotorstep) % mp->m_sb.sb_agcount;
- mp->m_agfrotor = (mp->m_agfrotor + 1) %
- (mp->m_sb.sb_agcount * rotorstep);
- } else
- startag = XFS_INO_TO_AGNO(mp, pip->i_ino);
-
- if (xfs_filestream_pick_ag(pip, startag, &ag, 0, 0))
- ag = NULLAGNUMBER;
-out:
- xfs_irele(pip);
- return ag;
-}
-
/*
* Pick a new allocation group for the current file and its file stream.
*
@@ -359,66 +310,6 @@ xfs_filestream_new_ag(
return err;
}
-static int
-xfs_filestreams_select_lengths(
- struct xfs_bmalloca *ap,
- struct xfs_alloc_arg *args,
- xfs_extlen_t *blen)
-{
- struct xfs_mount *mp = ap->ip->i_mount;
- struct xfs_perag *pag;
- xfs_agnumber_t start_agno;
- int error;
-
- args->total = ap->total;
-
- start_agno = XFS_FSB_TO_AGNO(mp, ap->blkno);
- if (start_agno == NULLAGNUMBER)
- start_agno = 0;
-
- pag = xfs_perag_grab(mp, start_agno);
- if (pag) {
- error = xfs_bmap_longest_free_extent(pag, args->tp, blen);
- xfs_perag_rele(pag);
- if (error) {
- if (error != -EAGAIN)
- return error;
- *blen = 0;
- }
- }
-
- if (*blen < args->maxlen) {
- xfs_agnumber_t agno = start_agno;
-
- error = xfs_filestream_new_ag(ap, &agno);
- if (error)
- return error;
- if (agno == NULLAGNUMBER)
- goto out_select;
-
- pag = xfs_perag_grab(mp, agno);
- if (!pag)
- goto out_select;
-
- error = xfs_bmap_longest_free_extent(pag, args->tp, blen);
- xfs_perag_rele(pag);
- if (error) {
- if (error != -EAGAIN)
- return error;
- *blen = 0;
- }
- start_agno = agno;
- }
-
-out_select:
- /*
- * Set the failure fallback case to look in the selected AG as stream
- * may have moved.
- */
- ap->blkno = args->fsbno = XFS_AGB_TO_FSB(mp, start_agno, 0);
- return 0;
-}
-
/*
* Search for an allocation group with a single extent large enough for
* the request. If one isn't found, then the largest available free extent is
@@ -430,12 +321,59 @@ xfs_filestream_select_ag(
struct xfs_alloc_arg *args,
xfs_extlen_t *blen)
{
- xfs_agnumber_t start_agno = xfs_filestream_lookup_ag(ap->ip);
+ struct xfs_mount *mp = ap->ip->i_mount;
+ struct xfs_perag *pag;
+ struct xfs_inode *pip = NULL;
+ xfs_agnumber_t agno = NULLAGNUMBER;
+ struct xfs_mru_cache_elem *mru;
+ int error;
- /* Determine the initial block number we will target for allocation. */
- if (start_agno == NULLAGNUMBER)
- start_agno = 0;
- ap->blkno = XFS_AGB_TO_FSB(args->mp, start_agno, 0);
+ args->total = ap->total;
+ *blen = 0;
+
+ pip = xfs_filestream_get_parent(ap->ip);
+ if (!pip) {
+ agno = 0;
+ goto new_ag;
+ }
+
+ mru = xfs_mru_cache_lookup(mp->m_filestream, pip->i_ino);
+ if (mru) {
+ agno = container_of(mru, struct xfs_fstrm_item, mru)->ag;
+ xfs_mru_cache_done(mp->m_filestream);
+
+ trace_xfs_filestream_lookup(mp, ap->ip->i_ino, agno);
+ xfs_irele(pip);
+
+ ap->blkno = XFS_AGB_TO_FSB(args->mp, agno, 0);
+ xfs_bmap_adjacent(ap);
+
+ pag = xfs_perag_grab(mp, agno);
+ if (pag) {
+ error = xfs_bmap_longest_free_extent(pag, args->tp, blen);
+ xfs_perag_rele(pag);
+ if (error) {
+ if (error != -EAGAIN)
+ return error;
+ *blen = 0;
+ }
+ }
+ if (*blen >= args->maxlen)
+ goto out_select;
+ } else if (xfs_is_inode32(mp)) {
+ xfs_agnumber_t rotorstep = xfs_rotorstep;
+ agno = (mp->m_agfrotor / rotorstep) %
+ mp->m_sb.sb_agcount;
+ mp->m_agfrotor = (mp->m_agfrotor + 1) %
+ (mp->m_sb.sb_agcount * rotorstep);
+ xfs_irele(pip);
+ } else {
+ agno = XFS_INO_TO_AGNO(mp, pip->i_ino);
+ xfs_irele(pip);
+ }
+
+new_ag:
+ ap->blkno = XFS_AGB_TO_FSB(args->mp, agno, 0);
xfs_bmap_adjacent(ap);
/*
@@ -446,14 +384,32 @@ xfs_filestream_select_ag(
if (ap->tp->t_flags & XFS_TRANS_LOWMODE)
return 0;
- /*
- * Search for an allocation group with a single extent large enough for
- * the request. If one isn't found, then adjust the minimum allocation
- * size to the largest space found.
- */
- return xfs_filestreams_select_lengths(ap, args, blen);
+ error = xfs_filestream_new_ag(ap, &agno);
+ if (error)
+ return error;
+ if (agno == NULLAGNUMBER) {
+ agno = 0;
+ goto out_select;
+ }
+
+ pag = xfs_perag_grab(mp, agno);
+ if (!pag)
+ goto out_select;
+
+ error = xfs_bmap_longest_free_extent(pag, args->tp, blen);
+ xfs_perag_rele(pag);
+ if (error) {
+ if (error != -EAGAIN)
+ return error;
+ *blen = 0;
+ }
+
+out_select:
+ ap->blkno = XFS_AGB_TO_FSB(mp, agno, 0);
+ return 0;
}
+
void
xfs_filestream_deassociate(
struct xfs_inode *ip)
--
2.39.0
next prev parent reply other threads:[~2023-02-09 22:26 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-09 22:17 [PATCH v3 00/42] xfs: per-ag centric allocation alogrithms Dave Chinner
2023-02-09 22:17 ` [PATCH 01/42] xfs: fix low space alloc deadlock Dave Chinner
2023-02-09 22:17 ` [PATCH 02/42] xfs: prefer free inodes at ENOSPC over chunk allocation Dave Chinner
2023-02-09 22:17 ` [PATCH 03/42] xfs: block reservation too large for minleft allocation Dave Chinner
2023-02-09 22:17 ` [PATCH 04/42] xfs: drop firstblock constraints from allocation setup Dave Chinner
2023-02-09 22:17 ` [PATCH 05/42] xfs: t_firstblock is tracking AGs not blocks Dave Chinner
2023-02-09 22:17 ` [PATCH 06/42] xfs: don't assert fail on transaction cancel with deferred ops Dave Chinner
2023-02-09 22:17 ` [PATCH 07/42] xfs: active perag reference counting Dave Chinner
2023-02-11 4:06 ` Darrick J. Wong
2023-02-09 22:17 ` [PATCH 08/42] xfs: rework the perag trace points to be perag centric Dave Chinner
2023-02-09 22:17 ` [PATCH 09/42] xfs: convert xfs_imap() to take a perag Dave Chinner
2023-02-09 22:17 ` [PATCH 10/42] xfs: use active perag references for inode allocation Dave Chinner
2023-02-09 22:17 ` [PATCH 11/42] xfs: inobt can use perags in many more places than it does Dave Chinner
2023-02-09 22:17 ` [PATCH 12/42] xfs: convert xfs_ialloc_next_ag() to an atomic Dave Chinner
2023-02-09 22:17 ` [PATCH 13/42] xfs: perags need atomic operational state Dave Chinner
2023-02-09 22:17 ` [PATCH 14/42] xfs: introduce xfs_for_each_perag_wrap() Dave Chinner
2023-02-09 22:17 ` [PATCH 15/42] xfs: rework xfs_alloc_vextent() Dave Chinner
2023-02-09 22:17 ` [PATCH 16/42] xfs: factor xfs_alloc_vextent_this_ag() for _iterate_ags() Dave Chinner
2023-02-09 22:18 ` [PATCH 17/42] xfs: combine __xfs_alloc_vextent_this_ag and xfs_alloc_ag_vextent Dave Chinner
2023-02-09 22:18 ` [PATCH 18/42] xfs: use xfs_alloc_vextent_this_ag() where appropriate Dave Chinner
2023-02-09 22:18 ` [PATCH 19/42] xfs: factor xfs_bmap_btalloc() Dave Chinner
2023-02-09 22:18 ` [PATCH 20/42] xfs: use xfs_alloc_vextent_first_ag() where appropriate Dave Chinner
2023-02-09 22:18 ` [PATCH 21/42] xfs: use xfs_alloc_vextent_start_bno() " Dave Chinner
2023-02-09 22:18 ` [PATCH 22/42] xfs: introduce xfs_alloc_vextent_near_bno() Dave Chinner
2023-02-09 22:18 ` [PATCH 23/42] xfs: introduce xfs_alloc_vextent_exact_bno() Dave Chinner
2023-02-09 22:18 ` [PATCH 24/42] xfs: introduce xfs_alloc_vextent_prepare() Dave Chinner
2023-02-09 22:18 ` [PATCH 25/42] xfs: move allocation accounting to xfs_alloc_vextent_set_fsbno() Dave Chinner
2023-02-09 22:18 ` [PATCH 26/42] xfs: fold xfs_alloc_ag_vextent() into callers Dave Chinner
2023-02-09 22:18 ` [PATCH 27/42] xfs: move the minimum agno checks into xfs_alloc_vextent_check_args Dave Chinner
2023-02-09 22:18 ` [PATCH 28/42] xfs: convert xfs_alloc_vextent_iterate_ags() to use perag walker Dave Chinner
2023-02-09 22:18 ` [PATCH 29/42] xfs: convert trim to use for_each_perag_range Dave Chinner
2023-02-09 22:18 ` [PATCH 30/42] xfs: factor out filestreams from xfs_bmap_btalloc_nullfb Dave Chinner
2023-02-09 22:18 ` [PATCH 31/42] xfs: get rid of notinit from xfs_bmap_longest_free_extent Dave Chinner
2023-02-09 22:18 ` [PATCH 32/42] xfs: use xfs_bmap_longest_free_extent() in filestreams Dave Chinner
2023-02-09 22:18 ` [PATCH 33/42] xfs: move xfs_bmap_btalloc_filestreams() to xfs_filestreams.c Dave Chinner
2023-02-09 22:18 ` Dave Chinner [this message]
2023-02-09 22:18 ` [PATCH 35/42] xfs: merge new filestream AG selection into xfs_filestream_select_ag() Dave Chinner
2023-02-09 22:18 ` [PATCH 36/42] xfs: remove xfs_filestream_select_ag() longest extent check Dave Chinner
2023-02-09 22:18 ` [PATCH 37/42] xfs: factor out MRU hit case in xfs_filestream_select_ag Dave Chinner
2023-02-09 22:18 ` [PATCH 38/42] xfs: track an active perag reference in filestreams Dave Chinner
2023-02-09 22:18 ` [PATCH 39/42] xfs: use for_each_perag_wrap in xfs_filestream_pick_ag Dave Chinner
2023-02-09 22:18 ` [PATCH 40/42] xfs: pass perag to filestreams tracing Dave Chinner
2023-02-09 22:18 ` [PATCH 41/42] xfs: return a referenced perag from filestreams allocator Dave Chinner
2023-02-09 22:18 ` [PATCH 42/42] xfs: refactor the filestreams allocator pick functions Dave Chinner
2023-02-10 3:09 ` [PATCH v3 00/42] xfs: per-ag centric allocation alogrithms Darrick J. Wong
2023-02-10 5:00 ` Dave Chinner
-- strict thread matches above, loose matches on Subject: below --
2023-01-18 22:44 [PATCH " Dave Chinner
2023-01-18 22:44 ` [PATCH 34/42] xfs: merge filestream AG lookup into xfs_filestream_select_ag() Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230209221825.3722244-35-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox