From: Dave Chinner <david@fromorbit.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH 37/42] xfs: factor out MRU hit case in xfs_filestream_select_ag
Date: Fri, 10 Feb 2023 09:18:20 +1100 [thread overview]
Message-ID: <20230209221825.3722244-38-david@fromorbit.com> (raw)
In-Reply-To: <20230209221825.3722244-1-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
Because it now stands out like a sore thumb. Factoring out this case
starts the process of simplifying xfs_filestream_select_ag() again.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
fs/xfs/xfs_filestream.c | 133 +++++++++++++++++++++++++---------------
1 file changed, 83 insertions(+), 50 deletions(-)
diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index 95e28aae35ab..147296a1079e 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -259,10 +259,85 @@ xfs_filestream_get_parent(
return dir ? XFS_I(dir) : NULL;
}
+/*
+ * Lookup the mru cache for an existing association. If one exists and we can
+ * use it, return with the agno and blen indicating that the allocation will
+ * proceed with that association.
+ *
+ * If we have no association, or we cannot use the current one and have to
+ * destroy it, return with blen = 0 and agno pointing at the next agno to try.
+ */
+int
+xfs_filestream_select_ag_mru(
+ struct xfs_bmalloca *ap,
+ struct xfs_alloc_arg *args,
+ struct xfs_inode *pip,
+ xfs_agnumber_t *agno,
+ xfs_extlen_t *blen)
+{
+ struct xfs_mount *mp = ap->ip->i_mount;
+ struct xfs_perag *pag;
+ struct xfs_mru_cache_elem *mru;
+ int error;
+
+ mru = xfs_mru_cache_lookup(mp->m_filestream, pip->i_ino);
+ if (!mru)
+ goto out_default_agno;
+
+ *agno = container_of(mru, struct xfs_fstrm_item, mru)->ag;
+ xfs_mru_cache_done(mp->m_filestream);
+
+ trace_xfs_filestream_lookup(mp, ap->ip->i_ino, *agno);
+
+ ap->blkno = XFS_AGB_TO_FSB(args->mp, *agno, 0);
+ xfs_bmap_adjacent(ap);
+
+ pag = xfs_perag_grab(mp, *agno);
+ if (!pag)
+ goto out_default_agno;
+
+ error = xfs_bmap_longest_free_extent(pag, args->tp, blen);
+ xfs_perag_rele(pag);
+ if (error) {
+ if (error != -EAGAIN)
+ return error;
+ *blen = 0;
+ }
+
+ /*
+ * We are done if there's still enough contiguous free space to succeed.
+ */
+ if (*blen >= args->maxlen)
+ return 0;
+
+ /* Changing parent AG association now, so remove the existing one. */
+ mru = xfs_mru_cache_remove(mp->m_filestream, pip->i_ino);
+ if (mru) {
+ struct xfs_fstrm_item *item =
+ container_of(mru, struct xfs_fstrm_item, mru);
+ *agno = (item->ag + 1) % mp->m_sb.sb_agcount;
+ xfs_fstrm_free_func(mp, mru);
+ return 0;
+ }
+
+out_default_agno:
+ if (xfs_is_inode32(mp)) {
+ xfs_agnumber_t rotorstep = xfs_rotorstep;
+ *agno = (mp->m_agfrotor / rotorstep) %
+ mp->m_sb.sb_agcount;
+ mp->m_agfrotor = (mp->m_agfrotor + 1) %
+ (mp->m_sb.sb_agcount * rotorstep);
+ return 0;
+ }
+ *agno = XFS_INO_TO_AGNO(mp, pip->i_ino);
+ return 0;
+
+}
+
/*
* Search for an allocation group with a single extent large enough for
- * the request. If one isn't found, then the largest available free extent is
- * returned as the best length possible.
+ * the request. If one isn't found, then adjust the minimum allocation
+ * size to the largest space found.
*/
int
xfs_filestream_select_ag(
@@ -271,12 +346,10 @@ xfs_filestream_select_ag(
xfs_extlen_t *blen)
{
struct xfs_mount *mp = ap->ip->i_mount;
- struct xfs_perag *pag;
struct xfs_inode *pip = NULL;
- xfs_agnumber_t agno = NULLAGNUMBER;
- struct xfs_mru_cache_elem *mru;
+ xfs_agnumber_t agno;
int flags = 0;
- int error = 0;
+ int error;
args->total = ap->total;
*blen = 0;
@@ -287,48 +360,10 @@ xfs_filestream_select_ag(
goto out_select;
}
- mru = xfs_mru_cache_lookup(mp->m_filestream, pip->i_ino);
- if (mru) {
- agno = container_of(mru, struct xfs_fstrm_item, mru)->ag;
- xfs_mru_cache_done(mp->m_filestream);
- mru = NULL;
+ error = xfs_filestream_select_ag_mru(ap, args, pip, &agno, blen);
+ if (error || *blen >= args->maxlen)
+ goto out_rele;
- trace_xfs_filestream_lookup(mp, ap->ip->i_ino, agno);
- xfs_irele(pip);
-
- ap->blkno = XFS_AGB_TO_FSB(args->mp, agno, 0);
- xfs_bmap_adjacent(ap);
-
- pag = xfs_perag_grab(mp, agno);
- if (pag) {
- error = xfs_bmap_longest_free_extent(pag, args->tp, blen);
- xfs_perag_rele(pag);
- if (error) {
- if (error != -EAGAIN)
- goto out_error;
- *blen = 0;
- }
- }
- if (*blen >= args->maxlen)
- goto out_select;
- } else if (xfs_is_inode32(mp)) {
- xfs_agnumber_t rotorstep = xfs_rotorstep;
- agno = (mp->m_agfrotor / rotorstep) %
- mp->m_sb.sb_agcount;
- mp->m_agfrotor = (mp->m_agfrotor + 1) %
- (mp->m_sb.sb_agcount * rotorstep);
- } else {
- agno = XFS_INO_TO_AGNO(mp, pip->i_ino);
- }
-
- /* Changing parent AG association now, so remove the existing one. */
- mru = xfs_mru_cache_remove(mp->m_filestream, pip->i_ino);
- if (mru) {
- struct xfs_fstrm_item *item =
- container_of(mru, struct xfs_fstrm_item, mru);
- agno = (item->ag + 1) % mp->m_sb.sb_agcount;
- xfs_fstrm_free_func(mp, mru);
- }
ap->blkno = XFS_AGB_TO_FSB(args->mp, agno, 0);
xfs_bmap_adjacent(ap);
@@ -347,8 +382,6 @@ xfs_filestream_select_ag(
*blen = ap->length;
error = xfs_filestream_pick_ag(pip, &agno, flags, blen);
- if (error)
- goto out_error;
if (agno == NULLAGNUMBER) {
agno = 0;
*blen = 0;
@@ -356,7 +389,7 @@ xfs_filestream_select_ag(
out_select:
ap->blkno = XFS_AGB_TO_FSB(mp, agno, 0);
-out_error:
+out_rele:
xfs_irele(pip);
return error;
--
2.39.0
next prev parent reply other threads:[~2023-02-09 22:26 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-09 22:17 [PATCH v3 00/42] xfs: per-ag centric allocation alogrithms Dave Chinner
2023-02-09 22:17 ` [PATCH 01/42] xfs: fix low space alloc deadlock Dave Chinner
2023-02-09 22:17 ` [PATCH 02/42] xfs: prefer free inodes at ENOSPC over chunk allocation Dave Chinner
2023-02-09 22:17 ` [PATCH 03/42] xfs: block reservation too large for minleft allocation Dave Chinner
2023-02-09 22:17 ` [PATCH 04/42] xfs: drop firstblock constraints from allocation setup Dave Chinner
2023-02-09 22:17 ` [PATCH 05/42] xfs: t_firstblock is tracking AGs not blocks Dave Chinner
2023-02-09 22:17 ` [PATCH 06/42] xfs: don't assert fail on transaction cancel with deferred ops Dave Chinner
2023-02-09 22:17 ` [PATCH 07/42] xfs: active perag reference counting Dave Chinner
2023-02-11 4:06 ` Darrick J. Wong
2023-02-09 22:17 ` [PATCH 08/42] xfs: rework the perag trace points to be perag centric Dave Chinner
2023-02-09 22:17 ` [PATCH 09/42] xfs: convert xfs_imap() to take a perag Dave Chinner
2023-02-09 22:17 ` [PATCH 10/42] xfs: use active perag references for inode allocation Dave Chinner
2023-02-09 22:17 ` [PATCH 11/42] xfs: inobt can use perags in many more places than it does Dave Chinner
2023-02-09 22:17 ` [PATCH 12/42] xfs: convert xfs_ialloc_next_ag() to an atomic Dave Chinner
2023-02-09 22:17 ` [PATCH 13/42] xfs: perags need atomic operational state Dave Chinner
2023-02-09 22:17 ` [PATCH 14/42] xfs: introduce xfs_for_each_perag_wrap() Dave Chinner
2023-02-09 22:17 ` [PATCH 15/42] xfs: rework xfs_alloc_vextent() Dave Chinner
2023-02-09 22:17 ` [PATCH 16/42] xfs: factor xfs_alloc_vextent_this_ag() for _iterate_ags() Dave Chinner
2023-02-09 22:18 ` [PATCH 17/42] xfs: combine __xfs_alloc_vextent_this_ag and xfs_alloc_ag_vextent Dave Chinner
2023-02-09 22:18 ` [PATCH 18/42] xfs: use xfs_alloc_vextent_this_ag() where appropriate Dave Chinner
2023-02-09 22:18 ` [PATCH 19/42] xfs: factor xfs_bmap_btalloc() Dave Chinner
2023-02-09 22:18 ` [PATCH 20/42] xfs: use xfs_alloc_vextent_first_ag() where appropriate Dave Chinner
2023-02-09 22:18 ` [PATCH 21/42] xfs: use xfs_alloc_vextent_start_bno() " Dave Chinner
2023-02-09 22:18 ` [PATCH 22/42] xfs: introduce xfs_alloc_vextent_near_bno() Dave Chinner
2023-02-09 22:18 ` [PATCH 23/42] xfs: introduce xfs_alloc_vextent_exact_bno() Dave Chinner
2023-02-09 22:18 ` [PATCH 24/42] xfs: introduce xfs_alloc_vextent_prepare() Dave Chinner
2023-02-09 22:18 ` [PATCH 25/42] xfs: move allocation accounting to xfs_alloc_vextent_set_fsbno() Dave Chinner
2023-02-09 22:18 ` [PATCH 26/42] xfs: fold xfs_alloc_ag_vextent() into callers Dave Chinner
2023-02-09 22:18 ` [PATCH 27/42] xfs: move the minimum agno checks into xfs_alloc_vextent_check_args Dave Chinner
2023-02-09 22:18 ` [PATCH 28/42] xfs: convert xfs_alloc_vextent_iterate_ags() to use perag walker Dave Chinner
2023-02-09 22:18 ` [PATCH 29/42] xfs: convert trim to use for_each_perag_range Dave Chinner
2023-02-09 22:18 ` [PATCH 30/42] xfs: factor out filestreams from xfs_bmap_btalloc_nullfb Dave Chinner
2023-02-09 22:18 ` [PATCH 31/42] xfs: get rid of notinit from xfs_bmap_longest_free_extent Dave Chinner
2023-02-09 22:18 ` [PATCH 32/42] xfs: use xfs_bmap_longest_free_extent() in filestreams Dave Chinner
2023-02-09 22:18 ` [PATCH 33/42] xfs: move xfs_bmap_btalloc_filestreams() to xfs_filestreams.c Dave Chinner
2023-02-09 22:18 ` [PATCH 34/42] xfs: merge filestream AG lookup into xfs_filestream_select_ag() Dave Chinner
2023-02-09 22:18 ` [PATCH 35/42] xfs: merge new filestream AG selection " Dave Chinner
2023-02-09 22:18 ` [PATCH 36/42] xfs: remove xfs_filestream_select_ag() longest extent check Dave Chinner
2023-02-09 22:18 ` Dave Chinner [this message]
2023-02-09 22:18 ` [PATCH 38/42] xfs: track an active perag reference in filestreams Dave Chinner
2023-02-09 22:18 ` [PATCH 39/42] xfs: use for_each_perag_wrap in xfs_filestream_pick_ag Dave Chinner
2023-02-09 22:18 ` [PATCH 40/42] xfs: pass perag to filestreams tracing Dave Chinner
2023-02-09 22:18 ` [PATCH 41/42] xfs: return a referenced perag from filestreams allocator Dave Chinner
2023-02-09 22:18 ` [PATCH 42/42] xfs: refactor the filestreams allocator pick functions Dave Chinner
2023-02-10 3:09 ` [PATCH v3 00/42] xfs: per-ag centric allocation alogrithms Darrick J. Wong
2023-02-10 5:00 ` Dave Chinner
-- strict thread matches above, loose matches on Subject: below --
2023-01-18 22:44 [PATCH " Dave Chinner
2023-01-18 22:45 ` [PATCH 37/42] xfs: factor out MRU hit case in xfs_filestream_select_ag Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230209221825.3722244-38-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox