From: Chris Hofstaedtler <zeha@debian.org>
To: linux-xfs@vger.kernel.org
Cc: Bastian Germann <bage@debian.org>,
"Darrick J. Wong" <djwong@kernel.org>,
Chris Hofstaedtler <zeha@debian.org>
Subject: [PATCH v3] Remove support for split-/usr installs
Date: Wed, 19 Jun 2024 23:48:43 +0200 [thread overview]
Message-ID: <20240619214843.183235-1-zeha@debian.org> (raw)
In-Reply-To: <20240612200330.GG2764752@frogsfrogsfrogs>
Always install binaries and other files under /usr, not /. This will
break any distribution that hasn't yet merged the two, which are
vanishingly small these days. This breaks the usecase of needing to
repair the /usr partition when there is no initramfs or livecd
available and / is the only option.
Signed-off-by: Chris Hofstaedtler <zeha@debian.org>
---
V1 -> V2: remove root_sbindir, root_libdir, PKG_ROOT_SBIN_DIR,
PKG_ROOT_LIB_DIR
V2 -> V3: fix debian-specific installation logic, i.e. do not
delete /usr/lib in xfslibs-dev
configure.ac | 21 ---------------------
debian/Makefile | 4 ++--
debian/local/initramfs.hook | 2 +-
debian/rules | 5 ++---
fsck/Makefile | 4 ++--
include/builddefs.in | 2 --
include/buildmacros | 20 ++++++++++----------
mkfs/Makefile | 4 ++--
repair/Makefile | 4 ++--
9 files changed, 21 insertions(+), 45 deletions(-)
diff --git a/configure.ac b/configure.ac
index da30fc5c..4530f387 100644
--- a/configure.ac
+++ b/configure.ac
@@ -113,27 +113,6 @@ esac
#
test -n "$multiarch" && enable_lib64=no
-#
-# Some important tools should be installed into the root partitions.
-#
-# Check whether exec_prefix=/usr: and install them to /sbin in that
-# case. If the user chooses a different prefix assume they just want
-# a local install for testing and not a system install.
-#
-case $exec_prefix:$prefix in
-NONE:NONE | NONE:/usr | /usr:*)
- root_sbindir='/sbin'
- root_libdir="/${base_libdir}"
- ;;
-*)
- root_sbindir="${sbindir}"
- root_libdir="${libdir}"
- ;;
-esac
-
-AC_SUBST([root_sbindir])
-AC_SUBST([root_libdir])
-
# Find localized files. Don't descend into any "dot directories"
# (like .git or .pc from quilt). Strangely, the "-print" argument
# to "find" is required, to avoid including such directories in the
diff --git a/debian/Makefile b/debian/Makefile
index cafe8bbb..2f9cd38c 100644
--- a/debian/Makefile
+++ b/debian/Makefile
@@ -31,6 +31,6 @@ endif
install-d-i: default
ifeq ($(PKG_DISTRIBUTION), debian)
- $(INSTALL) -m 755 -d $(PKG_ROOT_SBIN_DIR)
- $(INSTALL) -m 755 $(BOOT_MKFS_BIN) $(PKG_ROOT_SBIN_DIR)/mkfs.xfs
+ $(INSTALL) -m 755 -d $(PKG_SBIN_DIR)
+ $(INSTALL) -m 755 $(BOOT_MKFS_BIN) $(PKG_SBIN_DIR)/mkfs.xfs
endif
diff --git a/debian/local/initramfs.hook b/debian/local/initramfs.hook
index 5b24eaec..eac7e79e 100644
--- a/debian/local/initramfs.hook
+++ b/debian/local/initramfs.hook
@@ -45,7 +45,7 @@ rootfs_type() {
. /usr/share/initramfs-tools/hook-functions
if [ "$(rootfs_type)" = "xfs" ]; then
- copy_exec /sbin/xfs_repair
+ copy_exec /usr/sbin/xfs_repair
copy_exec /usr/sbin/xfs_db
copy_exec /usr/sbin/xfs_metadump
fi
diff --git a/debian/rules b/debian/rules
index 0c1cef92..0db0ed8e 100755
--- a/debian/rules
+++ b/debian/rules
@@ -105,9 +105,8 @@ binary-arch: checkroot built
$(pkgme) $(MAKE) dist
install -D -m 0755 debian/local/initramfs.hook debian/xfsprogs/usr/share/initramfs-tools/hooks/xfs
rmdir debian/xfslibs-dev/usr/share/doc/xfsprogs
- rm -f debian/xfslibs-dev/lib/$(DEB_HOST_MULTIARCH)/libhandle.la
- rm -f debian/xfslibs-dev/lib/$(DEB_HOST_MULTIARCH)/libhandle.a
- rm -fr debian/xfslibs-dev/usr/lib
+ rm -f debian/xfslibs-dev/usr/lib/$(DEB_HOST_MULTIARCH)/libhandle.la
+ rm -f debian/xfslibs-dev/usr/lib/$(DEB_HOST_MULTIARCH)/libhandle.a
dh_installdocs -XCHANGES
dh_installchangelogs
dh_strip
diff --git a/fsck/Makefile b/fsck/Makefile
index da9b6ded..5ca529f5 100644
--- a/fsck/Makefile
+++ b/fsck/Makefile
@@ -12,6 +12,6 @@ default: $(LTCOMMAND)
include $(BUILDRULES)
install: default
- $(INSTALL) -m 755 -d $(PKG_ROOT_SBIN_DIR)
- $(INSTALL) -m 755 xfs_fsck.sh $(PKG_ROOT_SBIN_DIR)/fsck.xfs
+ $(INSTALL) -m 755 -d $(PKG_SBIN_DIR)
+ $(INSTALL) -m 755 xfs_fsck.sh $(PKG_SBIN_DIR)/fsck.xfs
install-dev:
diff --git a/include/builddefs.in b/include/builddefs.in
index 644ed1cb..6ac36c14 100644
--- a/include/builddefs.in
+++ b/include/builddefs.in
@@ -48,8 +48,6 @@ datarootdir = @datarootdir@
top_builddir = @top_builddir@
PKG_SBIN_DIR = @sbindir@
-PKG_ROOT_SBIN_DIR = @root_sbindir@
-PKG_ROOT_LIB_DIR= @root_libdir@@libdirsuffix@
PKG_LIB_DIR = @libdir@@libdirsuffix@
PKG_LIBEXEC_DIR = @libexecdir@/@pkg_name@
PKG_INC_DIR = @includedir@/xfs
diff --git a/include/buildmacros b/include/buildmacros
index 6f34d7c5..9183e5bc 100644
--- a/include/buildmacros
+++ b/include/buildmacros
@@ -50,16 +50,16 @@ LTINSTALL = $(LIBTOOL) --quiet --mode=install $(INSTALL)
LTCOMPILE = $(LIBTOOL) --quiet --tag=CC --mode=compile $(CCF)
ifeq ($(ENABLE_SHARED),yes)
-LTLDFLAGS += -rpath $(PKG_ROOT_LIB_DIR)
+LTLDFLAGS += -rpath $(PKG_LIB_DIR)
LTLDFLAGS += -version-info $(LTVERSION)
endif
ifeq ($(ENABLE_SHARED),yes)
INSTALL_LTLIB = \
cd $(TOPDIR)/$(LIBNAME)/.libs; \
- ../$(INSTALL) -m 755 -d $(PKG_ROOT_LIB_DIR); \
- ../$(INSTALL) -m 755 -T so_dot_version $(LIBNAME).lai $(PKG_ROOT_LIB_DIR); \
- ../$(INSTALL) -T so_dot_current $(LIBNAME).lai $(PKG_ROOT_LIB_DIR)
+ ../$(INSTALL) -m 755 -d $(PKG_LIB_DIR); \
+ ../$(INSTALL) -m 755 -T so_dot_version $(LIBNAME).lai $(PKG_LIB_DIR); \
+ ../$(INSTALL) -T so_dot_current $(LIBNAME).lai $(PKG_LIB_DIR)
endif
# Libtool thinks the static and shared libs should be in the same dir, so
@@ -74,13 +74,13 @@ INSTALL_LTLIB_DEV = \
../$(INSTALL) -m 755 -d $(PKG_LIB_DIR); \
../$(INSTALL) -m 644 -T old_lib $(LIBNAME).lai $(PKG_LIB_DIR); \
../$(INSTALL) -m 644 $(LIBNAME).lai $(PKG_LIB_DIR)/$(LIBNAME).la ; \
- ../$(INSTALL) -m 755 -d $(PKG_ROOT_LIB_DIR); \
- ../$(INSTALL) -T so_base $(LIBNAME).lai $(PKG_ROOT_LIB_DIR); \
+ ../$(INSTALL) -m 755 -d $(PKG_LIB_DIR); \
+ ../$(INSTALL) -T so_base $(LIBNAME).lai $(PKG_LIB_DIR); \
if [ "x$(shell readlink -f $(PKG_LIB_DIR))" != \
- "x$(shell readlink -f $(PKG_ROOT_LIB_DIR))" ]; then \
- ../$(INSTALL) -S $(PKG_LIB_DIR)/$(LIBNAME).a $(PKG_ROOT_LIB_DIR)/$(LIBNAME).a; \
- ../$(INSTALL) -S $(PKG_LIB_DIR)/$(LIBNAME).la $(PKG_ROOT_LIB_DIR)/$(LIBNAME).la; \
- ../$(INSTALL) -S $(PKG_ROOT_LIB_DIR)/$(LIBNAME).so $(PKG_LIB_DIR)/$(LIBNAME).so; \
+ "x$(shell readlink -f $(PKG_LIB_DIR))" ]; then \
+ ../$(INSTALL) -S $(PKG_LIB_DIR)/$(LIBNAME).a $(PKG_LIB_DIR)/$(LIBNAME).a; \
+ ../$(INSTALL) -S $(PKG_LIB_DIR)/$(LIBNAME).la $(PKG_LIB_DIR)/$(LIBNAME).la; \
+ ../$(INSTALL) -S $(PKG_LIB_DIR)/$(LIBNAME).so $(PKG_LIB_DIR)/$(LIBNAME).so; \
fi
else
INSTALL_LTLIB_DEV = $(INSTALL_LTLIB_STATIC)
diff --git a/mkfs/Makefile b/mkfs/Makefile
index a0c168e3..a6173083 100644
--- a/mkfs/Makefile
+++ b/mkfs/Makefile
@@ -28,8 +28,8 @@ default: depend $(LTCOMMAND) $(CFGFILES)
include $(BUILDRULES)
install: default
- $(INSTALL) -m 755 -d $(PKG_ROOT_SBIN_DIR)
- $(LTINSTALL) -m 755 $(LTCOMMAND) $(PKG_ROOT_SBIN_DIR)
+ $(INSTALL) -m 755 -d $(PKG_SBIN_DIR)
+ $(LTINSTALL) -m 755 $(LTCOMMAND) $(PKG_SBIN_DIR)
$(INSTALL) -m 755 -d $(MKFS_CFG_DIR)
$(INSTALL) -m 644 $(CFGFILES) $(MKFS_CFG_DIR)
diff --git a/repair/Makefile b/repair/Makefile
index e5014deb..c5b0d4cb 100644
--- a/repair/Makefile
+++ b/repair/Makefile
@@ -99,8 +99,8 @@ include $(BUILDRULES)
#CFLAGS += ...
install: default
- $(INSTALL) -m 755 -d $(PKG_ROOT_SBIN_DIR)
- $(LTINSTALL) -m 755 $(LTCOMMAND) $(PKG_ROOT_SBIN_DIR)
+ $(INSTALL) -m 755 -d $(PKG_SBIN_DIR)
+ $(LTINSTALL) -m 755 $(LTCOMMAND) $(PKG_SBIN_DIR)
install-dev:
-include .dep
--
2.39.2
next prev parent reply other threads:[~2024-06-19 21:49 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-12 17:35 [PATCH 0/1] Forward: Install files into UsrMerged layout Bastian Germann
2024-06-12 17:35 ` [PATCH 1/1] " Bastian Germann
2024-06-12 18:08 ` Darrick J. Wong
2024-06-12 18:58 ` Chris Hofstaedtler
2024-06-12 20:07 ` Darrick J. Wong
2024-06-12 19:00 ` [PATCH v2 " Chris Hofstaedtler
2024-06-12 20:03 ` Darrick J. Wong
2024-06-12 20:10 ` Chris Hofstaedtler
2024-06-19 21:48 ` Chris Hofstaedtler [this message]
2024-06-20 18:34 ` [PATCH v3] Remove support for split-/usr installs Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240619214843.183235-1-zeha@debian.org \
--to=zeha@debian.org \
--cc=bage@debian.org \
--cc=djwong@kernel.org \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox