From: "Darrick J. Wong" <djwong@kernel.org>
To: Carlos Maiolino <cem@kernel.org>
Cc: Charalampos Mitrodimas <charmitro@posteo.net>,
linux-xfs@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] xfs: Verify DA node btree hash order
Date: Thu, 1 May 2025 07:12:49 -0700 [thread overview]
Message-ID: <20250501141249.GA25675@frogsfrogsfrogs> (raw)
In-Reply-To: <dyo3cdnqg3zocge2ygspovdlrjjo2dbwefbvq6w5mcbjgs3bdj@diwkyidcrpjg>
On Wed, Apr 30, 2025 at 11:23:57AM +0200, Carlos Maiolino wrote:
> On Sat, Apr 12, 2025 at 08:03:57PM +0000, Charalampos Mitrodimas wrote:
> > The xfs_da3_node_verify() function checks the integrity of directory
> > and attribute B-tree node blocks. However, it was missing a check to
> > ensure that the hash values of the btree entries within the node are
> > strictly increasing, as required by the B-tree structure.
> >
> > Add a loop to iterate through the btree entries and verify that each
> > entry's hash value is greater than the previous one. If an
> > out-of-order hash value is detected, return failure to indicate
> > corruption.
> >
> > This addresses the "XXX: hash order check?" comment and improves
> > corruption detection for DA node blocks.
> >
> > Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
> > ---
> > fs/xfs/libxfs/xfs_da_btree.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/fs/xfs/libxfs/xfs_da_btree.c b/fs/xfs/libxfs/xfs_da_btree.c
> > index 17d9e6154f1978ce5a5cb82176eea4d6b9cd768d..6c748911e54619c3ceae9b81f55cf61da6735f01 100644
> > --- a/fs/xfs/libxfs/xfs_da_btree.c
> > +++ b/fs/xfs/libxfs/xfs_da_btree.c
> > @@ -247,7 +247,16 @@ xfs_da3_node_verify(
> > ichdr.count > mp->m_attr_geo->node_ents)
> > return __this_address;
> >
> > - /* XXX: hash order check? */
> > + /* Check hash order */
> > + uint32_t prev_hash = be32_to_cpu(ichdr.btree[0].hashval);
> > +
> > + for (int i = 1; i < ichdr.count; i++) {
> > + uint32_t curr_hash = be32_to_cpu(ichdr.btree[i].hashval);
> > +
> > + if (curr_hash <= prev_hash)
> > + return __this_address;
> > + prev_hash = curr_hash;
> > + }
>
> Hmmm. Do you have any numbers related to the performance impact of this patch?
>
> IIRC for very populated directories we can end up having many entries here. It's
> not uncommon to have filesystems with millions of entries in a single directory.
> Now we'll be looping over all those entries here during verification, which could
> scale to many interactions on this loop.
> I'm not sure if I'm right here, but this seems to add a big performance penalty
> for directory writes, so I'm curious about the performance implications of this
> patch.
It's only a single dabtree block, which will likely be warm in cache
due to the crc32c validation.
But if memory serves, one can create a large enough dir (or xattr)
structure such that a dabtree node gets written out with a bunch of
entries with the same hashval. That was the subject of the correction
made in commit b7b81f336ac02f ("xfs_repair: fix incorrect dabtree
hashval comparison") so I've been wondering if this passes the xfs/599
test? Or am I just being dumb?
--D
> >
> > return NULL;
> > }
> >
> > ---
> > base-commit: ecd5d67ad602c2c12e8709762717112ef0958767
> > change-id: 20250412-xfs-hash-check-be7397881a2c
> >
> > Best regards,
> > --
> > Charalampos Mitrodimas <charmitro@posteo.net>
> >
>
next prev parent reply other threads:[~2025-05-01 14:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <6Fo_nCBU7RijxC1Kg6qD573hCAQBTcddQlb7i0E9C7tbpPIycSQ8Vt3BeW-1DqdayPO9EzyJLyNgxpH6rfts4g==@protonmail.internalid>
2025-04-12 20:03 ` [PATCH] xfs: Verify DA node btree hash order Charalampos Mitrodimas
2025-04-14 22:15 ` Darrick J. Wong
2025-04-15 1:08 ` Charalampos Mitrodimas
2025-04-30 9:23 ` Carlos Maiolino
2025-05-01 14:12 ` Darrick J. Wong [this message]
2025-05-01 18:54 ` Charalampos Mitrodimas
2025-05-03 21:12 ` Charalampos Mitrodimas
2025-05-05 7:10 ` Carlos Maiolino
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250501141249.GA25675@frogsfrogsfrogs \
--to=djwong@kernel.org \
--cc=cem@kernel.org \
--cc=charmitro@posteo.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox