From: Joanne Koong <joannelkoong@gmail.com>
To: brauner@kernel.org, miklos@szeredi.hu
Cc: hch@infradead.org, djwong@kernel.org,
linux-fsdevel@vger.kernel.org, kernel-team@meta.com,
linux-xfs@vger.kernel.org, linux-doc@vger.kernel.org
Subject: [PATCH v1 14/16] fuse: use iomap for read_folio
Date: Fri, 29 Aug 2025 16:56:25 -0700 [thread overview]
Message-ID: <20250829235627.4053234-15-joannelkoong@gmail.com> (raw)
In-Reply-To: <20250829235627.4053234-1-joannelkoong@gmail.com>
Read folio data into the page cache using iomap. This gives us granular
uptodate tracking for large folios, which optimizes how much data needs
to be read in. If some portions of the folio are already uptodate (eg
through a prior write), we only need to read in the non-uptodate
portions.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
---
fs/fuse/file.c | 72 ++++++++++++++++++++++++++++++++++----------------
1 file changed, 49 insertions(+), 23 deletions(-)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 5525a4520b0f..bdfb13cdee4b 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -828,22 +828,62 @@ static int fuse_do_readfolio(struct file *file, struct folio *folio,
return 0;
}
+static int fuse_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
+ unsigned int flags, struct iomap *iomap,
+ struct iomap *srcmap)
+{
+ iomap->type = IOMAP_MAPPED;
+ iomap->length = length;
+ iomap->offset = offset;
+ return 0;
+}
+
+static const struct iomap_ops fuse_iomap_ops = {
+ .iomap_begin = fuse_iomap_begin,
+};
+
+struct fuse_fill_read_data {
+ struct file *file;
+};
+
+static int fuse_iomap_read_folio_range_async(const struct iomap_iter *iter,
+ struct folio *folio, loff_t pos,
+ size_t len)
+{
+ struct fuse_fill_read_data *data = iter->private;
+ struct file *file = data->file;
+ size_t off = offset_in_folio(folio, pos);
+ int ret;
+
+ /*
+ * for non-readahead read requests, do reads synchronously since
+ * it's not guaranteed that the server can handle out-of-order reads
+ */
+ iomap_start_folio_read(folio, len);
+ ret = fuse_do_readfolio(file, folio, off, len);
+ iomap_finish_folio_read(folio, off, len, ret);
+ return ret;
+}
+
+static const struct iomap_read_ops fuse_iomap_read_ops = {
+ .read_folio_range = fuse_iomap_read_folio_range_async,
+};
+
static int fuse_read_folio(struct file *file, struct folio *folio)
{
struct inode *inode = folio->mapping->host;
+ struct fuse_fill_read_data data = {
+ .file = file,
+ };
int err;
- err = -EIO;
- if (fuse_is_bad(inode))
- goto out;
-
- err = fuse_do_readfolio(file, folio, 0, folio_size(folio));
- if (!err)
- folio_mark_uptodate(folio);
+ if (fuse_is_bad(inode)) {
+ folio_unlock(folio);
+ return -EIO;
+ }
+ err = iomap_read_folio(folio, &fuse_iomap_ops, &fuse_iomap_read_ops, &data);
fuse_invalidate_atime(inode);
- out:
- folio_unlock(folio);
return err;
}
@@ -1394,20 +1434,6 @@ static const struct iomap_write_ops fuse_iomap_write_ops = {
.read_folio_range = fuse_iomap_read_folio_range,
};
-static int fuse_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
- unsigned int flags, struct iomap *iomap,
- struct iomap *srcmap)
-{
- iomap->type = IOMAP_MAPPED;
- iomap->length = length;
- iomap->offset = offset;
- return 0;
-}
-
-static const struct iomap_ops fuse_iomap_ops = {
- .iomap_begin = fuse_iomap_begin,
-};
-
static ssize_t fuse_cache_write_iter(struct kiocb *iocb, struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
--
2.47.3
next prev parent reply other threads:[~2025-08-29 23:58 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-29 23:56 [PATCH v1 00/16] fuse: use iomap for buffered reads + readahead Joanne Koong
2025-08-29 23:56 ` [PATCH v1 01/16] iomap: move async bio read logic into helper function Joanne Koong
2025-09-03 20:16 ` Darrick J. Wong
2025-09-04 6:00 ` Christoph Hellwig
2025-09-04 21:44 ` Joanne Koong
2025-08-29 23:56 ` [PATCH v1 02/16] iomap: rename cur_folio_in_bio to folio_unlocked Joanne Koong
2025-09-03 20:26 ` [PATCH v1 02/16] iomap: rename cur_folio_in_bio to folio_unlockedOM Darrick J. Wong
2025-09-04 6:03 ` Christoph Hellwig
2025-09-04 22:06 ` Joanne Koong
2025-08-29 23:56 ` [PATCH v1 03/16] iomap: refactor read/readahead completion Joanne Koong
2025-09-04 6:05 ` Christoph Hellwig
2025-09-04 23:16 ` Joanne Koong
2025-08-29 23:56 ` [PATCH v1 04/16] iomap: use iomap_iter->private for stashing read/readahead bio Joanne Koong
2025-09-03 20:30 ` Darrick J. Wong
2025-09-04 6:07 ` Christoph Hellwig
2025-09-04 22:20 ` Joanne Koong
2025-09-04 23:15 ` Joanne Koong
2025-08-29 23:56 ` [PATCH v1 05/16] iomap: propagate iomap_read_folio() error to caller Joanne Koong
2025-09-03 20:32 ` Darrick J. Wong
2025-09-04 6:09 ` Christoph Hellwig
2025-09-04 21:13 ` Matthew Wilcox
2025-08-29 23:56 ` [PATCH v1 06/16] iomap: move read/readahead logic out of CONFIG_BLOCK guard Joanne Koong
2025-08-29 23:56 ` [PATCH v1 07/16] iomap: iterate through entire folio in iomap_readpage_iter() Joanne Koong
2025-09-03 20:43 ` Darrick J. Wong
2025-09-04 22:37 ` Joanne Koong
2025-09-04 6:14 ` Christoph Hellwig
2025-09-04 22:45 ` Joanne Koong
2025-08-29 23:56 ` [PATCH v1 08/16] iomap: rename iomap_readpage_iter() to iomap_readfolio_iter() Joanne Koong
2025-09-04 6:15 ` Christoph Hellwig
2025-09-04 22:47 ` Joanne Koong
2025-08-29 23:56 ` [PATCH v1 09/16] iomap: rename iomap_readpage_ctx struct to iomap_readfolio_ctx Joanne Koong
2025-09-03 20:44 ` Darrick J. Wong
2025-08-29 23:56 ` [PATCH v1 10/16] iomap: add iomap_start_folio_read() helper Joanne Koong
2025-09-03 20:52 ` Darrick J. Wong
2025-08-29 23:56 ` [PATCH v1 11/16] iomap: make start folio read and finish folio read public APIs Joanne Koong
2025-09-03 20:53 ` Darrick J. Wong
2025-09-04 6:15 ` Christoph Hellwig
2025-08-29 23:56 ` [PATCH v1 12/16] iomap: add iomap_read_ops for read and readahead Joanne Koong
2025-09-03 21:08 ` Darrick J. Wong
2025-09-04 20:58 ` Joanne Koong
2025-09-04 6:21 ` Christoph Hellwig
2025-09-04 21:38 ` Joanne Koong
2025-08-29 23:56 ` [PATCH v1 13/16] iomap: add a private arg " Joanne Koong
2025-08-30 1:54 ` Gao Xiang
2025-09-02 21:24 ` Joanne Koong
2025-09-03 1:55 ` Gao Xiang
2025-09-03 21:11 ` Darrick J. Wong
2025-08-29 23:56 ` Joanne Koong [this message]
2025-09-03 21:13 ` [PATCH v1 14/16] fuse: use iomap for read_folio Darrick J. Wong
2025-08-29 23:56 ` [PATCH v1 15/16] fuse: use iomap for readahead Joanne Koong
2025-09-03 21:17 ` Darrick J. Wong
2025-09-04 19:40 ` Joanne Koong
2025-09-04 19:46 ` Joanne Koong
2025-08-29 23:56 ` [PATCH v1 16/16] fuse: remove fuse_readpages_end() null mapping check Joanne Koong
2025-09-02 9:21 ` Miklos Szeredi
2025-09-02 21:19 ` Joanne Koong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250829235627.4053234-15-joannelkoong@gmail.com \
--to=joannelkoong@gmail.com \
--cc=brauner@kernel.org \
--cc=djwong@kernel.org \
--cc=hch@infradead.org \
--cc=kernel-team@meta.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
--cc=miklos@szeredi.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).