Linux XFS filesystem development
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <djwong@kernel.org>
To: Andrey Albershteyn <aalbersh@redhat.com>
Cc: aalbersh@kernel.org, linux-fsdevel@vger.kernel.org,
	linux-xfs@vger.kernel.org
Subject: Re: [PATCH v3 v3 2/4] xfs_quota: utilize file_setattr to set prjid on special files
Date: Fri, 12 Sep 2025 16:38:52 -0700	[thread overview]
Message-ID: <20250912233852.GK1587915@frogsfrogsfrogs> (raw)
In-Reply-To: <20250909-xattrat-syscall-v3-2-4407a714817e@kernel.org>

On Tue, Sep 09, 2025 at 05:24:37PM +0200, Andrey Albershteyn wrote:
> From: Andrey Albershteyn <aalbersh@redhat.com>
> 
> Utilize new file_getattr/file_setattr syscalls to set project ID on
> special files. Previously, special files were skipped due to lack of the
> way to call FS_IOC_SETFSXATTR ioctl on them. The quota accounting was
> therefore missing these inodes (special files created before project
> setup). The ones created after project initialization did inherit the
> projid flag from the parent.
> 
> Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>

Looks good now, thanks for the nitpick cleanups!
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>

--D

> ---
>  quota/project.c | 142 +++++++++++++++++++++++++++++---------------------------
>  1 file changed, 74 insertions(+), 68 deletions(-)
> 
> diff --git a/quota/project.c b/quota/project.c
> index adb26945fa57..5832e1474e25 100644
> --- a/quota/project.c
> +++ b/quota/project.c
> @@ -4,14 +4,17 @@
>   * All Rights Reserved.
>   */
>  
> +#include <unistd.h>
>  #include "command.h"
>  #include "input.h"
>  #include "init.h"
> +#include "libfrog/file_attr.h"
>  #include "quota.h"
>  
>  static cmdinfo_t project_cmd;
>  static prid_t prid;
>  static int recurse_depth = -1;
> +static int dfd;
>  
>  enum {
>  	CHECK_PROJECT	= 0x1,
> @@ -19,13 +22,6 @@ enum {
>  	CLEAR_PROJECT	= 0x4,
>  };
>  
> -#define EXCLUDED_FILE_TYPES(x) \
> -	   (S_ISCHR((x)) \
> -	|| S_ISBLK((x)) \
> -	|| S_ISFIFO((x)) \
> -	|| S_ISLNK((x)) \
> -	|| S_ISSOCK((x)))
> -
>  static void
>  project_help(void)
>  {
> @@ -85,8 +81,8 @@ check_project(
>  	int			flag,
>  	struct FTW		*data)
>  {
> -	struct fsxattr		fsx;
> -	int			fd;
> +	int			error;
> +	struct file_attr	fa;
>  
>  	if (recurse_depth >= 0 && data->level > recurse_depth)
>  		return 0;
> @@ -96,30 +92,30 @@ check_project(
>  		fprintf(stderr, _("%s: cannot stat file %s\n"), progname, path);
>  		return 0;
>  	}
> -	if (EXCLUDED_FILE_TYPES(stat->st_mode)) {
> -		fprintf(stderr, _("%s: skipping special file %s\n"), progname, path);
> -		return 0;
> -	}
>  
> -	if ((fd = open(path, O_RDONLY|O_NOCTTY)) == -1) {
> -		exitcode = 1;
> -		fprintf(stderr, _("%s: cannot open %s: %s\n"),
> -			progname, path, strerror(errno));
> -	} else if ((xfsctl(path, fd, FS_IOC_FSGETXATTR, &fsx)) < 0) {
> -		exitcode = 1;
> +	error = xfrog_file_getattr(dfd, path, stat, &fa, AT_SYMLINK_NOFOLLOW);
> +	if (error && errno == EOPNOTSUPP) {
> +		if (SPECIAL_FILE(stat->st_mode)) {
> +			fprintf(stderr, _("%s: skipping special file %s: %s\n"),
> +					progname, path, strerror(errno));
> +			return 0;
> +		}
> +	}
> +	if (error) {
>  		fprintf(stderr, _("%s: cannot get flags on %s: %s\n"),
> -			progname, path, strerror(errno));
> -	} else {
> -		if (fsx.fsx_projid != prid)
> -			printf(_("%s - project identifier is not set"
> -				 " (inode=%u, tree=%u)\n"),
> -				path, fsx.fsx_projid, (unsigned int)prid);
> -		if (!(fsx.fsx_xflags & FS_XFLAG_PROJINHERIT) && S_ISDIR(stat->st_mode))
> -			printf(_("%s - project inheritance flag is not set\n"),
> -				path);
> +				progname, path, strerror(errno));
> +		exitcode = 1;
> +		return 0;
>  	}
> -	if (fd != -1)
> -		close(fd);
> +
> +	if (fa.fa_projid != prid)
> +		printf(_("%s - project identifier is not set"
> +				" (inode=%u, tree=%u)\n"),
> +			path, fa.fa_projid, (unsigned int)prid);
> +	if (!(fa.fa_xflags & FS_XFLAG_PROJINHERIT) && S_ISDIR(stat->st_mode))
> +		printf(_("%s - project inheritance flag is not set\n"),
> +			path);
> +
>  	return 0;
>  }
>  
> @@ -130,8 +126,8 @@ clear_project(
>  	int			flag,
>  	struct FTW		*data)
>  {
> -	struct fsxattr		fsx;
> -	int			fd;
> +	int			error;
> +	struct file_attr	fa;
>  
>  	if (recurse_depth >= 0 && data->level > recurse_depth)
>  		return 0;
> @@ -141,32 +137,32 @@ clear_project(
>  		fprintf(stderr, _("%s: cannot stat file %s\n"), progname, path);
>  		return 0;
>  	}
> -	if (EXCLUDED_FILE_TYPES(stat->st_mode)) {
> -		fprintf(stderr, _("%s: skipping special file %s\n"), progname, path);
> -		return 0;
> +
> +	error = xfrog_file_getattr(dfd, path, stat, &fa, AT_SYMLINK_NOFOLLOW);
> +	if (error && errno == EOPNOTSUPP) {
> +		if (SPECIAL_FILE(stat->st_mode)) {
> +			fprintf(stderr, _("%s: skipping special file %s: %s\n"),
> +					progname, path, strerror(errno));
> +			return 0;
> +		}
>  	}
>  
> -	if ((fd = open(path, O_RDONLY|O_NOCTTY)) == -1) {
> -		exitcode = 1;
> -		fprintf(stderr, _("%s: cannot open %s: %s\n"),
> -			progname, path, strerror(errno));
> -		return 0;
> -	} else if (xfsctl(path, fd, FS_IOC_FSGETXATTR, &fsx) < 0) {
> -		exitcode = 1;
> +	if (error) {
>  		fprintf(stderr, _("%s: cannot get flags on %s: %s\n"),
> -			progname, path, strerror(errno));
> -		close(fd);
> +				progname, path, strerror(errno));
> +		exitcode = 1;
>  		return 0;
>  	}
>  
> -	fsx.fsx_projid = 0;
> -	fsx.fsx_xflags &= ~FS_XFLAG_PROJINHERIT;
> -	if (xfsctl(path, fd, FS_IOC_FSSETXATTR, &fsx) < 0) {
> -		exitcode = 1;
> +	fa.fa_projid = 0;
> +	fa.fa_xflags &= ~FS_XFLAG_PROJINHERIT;
> +
> +	error = xfrog_file_setattr(dfd, path, stat, &fa, AT_SYMLINK_NOFOLLOW);
> +	if (error) {
>  		fprintf(stderr, _("%s: cannot clear project on %s: %s\n"),
>  			progname, path, strerror(errno));
> +		exitcode = 1;
>  	}
> -	close(fd);
>  	return 0;
>  }
>  
> @@ -177,8 +173,8 @@ setup_project(
>  	int			flag,
>  	struct FTW		*data)
>  {
> -	struct fsxattr		fsx;
> -	int			fd;
> +	struct file_attr	fa;
> +	int			error;
>  
>  	if (recurse_depth >= 0 && data->level > recurse_depth)
>  		return 0;
> @@ -188,32 +184,33 @@ setup_project(
>  		fprintf(stderr, _("%s: cannot stat file %s\n"), progname, path);
>  		return 0;
>  	}
> -	if (EXCLUDED_FILE_TYPES(stat->st_mode)) {
> -		fprintf(stderr, _("%s: skipping special file %s\n"), progname, path);
> -		return 0;
> +
> +	error = xfrog_file_getattr(dfd, path, stat, &fa, AT_SYMLINK_NOFOLLOW);
> +	if (error && errno == EOPNOTSUPP) {
> +		if (SPECIAL_FILE(stat->st_mode)) {
> +			fprintf(stderr, _("%s: skipping special file %s\n"),
> +					progname, path);
> +			return 0;
> +		}
>  	}
>  
> -	if ((fd = open(path, O_RDONLY|O_NOCTTY)) == -1) {
> -		exitcode = 1;
> -		fprintf(stderr, _("%s: cannot open %s: %s\n"),
> -			progname, path, strerror(errno));
> -		return 0;
> -	} else if (xfsctl(path, fd, FS_IOC_FSGETXATTR, &fsx) < 0) {
> -		exitcode = 1;
> +	if (error) {
>  		fprintf(stderr, _("%s: cannot get flags on %s: %s\n"),
> -			progname, path, strerror(errno));
> -		close(fd);
> +				progname, path, strerror(errno));
> +		exitcode = 1;
>  		return 0;
>  	}
>  
> -	fsx.fsx_projid = prid;
> -	fsx.fsx_xflags |= FS_XFLAG_PROJINHERIT;
> -	if (xfsctl(path, fd, FS_IOC_FSSETXATTR, &fsx) < 0) {
> -		exitcode = 1;
> +	fa.fa_projid = prid;
> +	if (S_ISDIR(stat->st_mode))
> +		fa.fa_xflags |= FS_XFLAG_PROJINHERIT;
> +
> +	error = xfrog_file_setattr(dfd, path, stat, &fa, AT_SYMLINK_NOFOLLOW);
> +	if (error) {
>  		fprintf(stderr, _("%s: cannot set project on %s: %s\n"),
>  			progname, path, strerror(errno));
> +		exitcode = 1;
>  	}
> -	close(fd);
>  	return 0;
>  }
>  
> @@ -223,6 +220,13 @@ project_operations(
>  	char		*dir,
>  	int		type)
>  {
> +	dfd = open(dir, O_RDONLY | O_NOCTTY);
> +	if (dfd < -1) {
> +		printf(_("Error opening dir %s for project %s...\n"), dir,
> +				project);
> +		return;
> +	}
> +
>  	switch (type) {
>  	case CHECK_PROJECT:
>  		printf(_("Checking project %s (path %s)...\n"), project, dir);
> @@ -237,6 +241,8 @@ project_operations(
>  		nftw(dir, clear_project, 100, FTW_PHYS|FTW_MOUNT);
>  		break;
>  	}
> +
> +	close(dfd);
>  }
>  
>  static void
> 
> -- 
> 2.50.1
> 
> 

  reply	other threads:[~2025-09-12 23:38 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-09 15:22 Tests for file_getattr()/file_setattr() and xfsprogs update Andrey Albershteyn
2025-09-09 15:24 ` [PATCH v3 0/4] xfsprogs: utilize file_getattr() and file_setattr() Andrey Albershteyn
2025-09-09 15:24   ` [PATCH v3 v3 1/4] libfrog: add wrappers for file_getattr/file_setattr syscalls Andrey Albershteyn
2025-09-12 23:38     ` Darrick J. Wong
2025-09-09 15:24   ` [PATCH v3 v3 2/4] xfs_quota: utilize file_setattr to set prjid on special files Andrey Albershteyn
2025-09-12 23:38     ` Darrick J. Wong [this message]
2025-09-09 15:24   ` [PATCH v3 v3 3/4] xfs_io: make ls/chattr work with " Andrey Albershteyn
2025-09-09 15:24   ` [PATCH v3 v3 4/4] xfs_db: use file_setattr to copy attributes on special files with rdump Andrey Albershteyn
2025-09-09 15:25 ` [PATCH v3 0/3] Test file_getattr and file_setattr syscalls Andrey Albershteyn
2025-09-09 15:25   ` [PATCH v3 1/3] file_attr: introduce program to set/get fsxattr Andrey Albershteyn
2025-09-12 23:39     ` Darrick J. Wong
2025-09-09 15:25   ` [PATCH v3 2/3] generic: introduce test to test file_getattr/file_setattr syscalls Andrey Albershteyn
2025-09-23 16:09     ` Andrey Albershteyn
2025-09-09 15:25   ` [PATCH v3 3/3] xfs: test quota's project ID on special files Andrey Albershteyn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250912233852.GK1587915@frogsfrogsfrogs \
    --to=djwong@kernel.org \
    --cc=aalbersh@kernel.org \
    --cc=aalbersh@redhat.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox