From: "Darrick J. Wong" <djwong@kernel.org>
To: Carlos Maiolino <cem@kernel.org>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [RFC PATCH 1/3] xfs: add xfs_error_report the ability to display an error code
Date: Tue, 8 Sep 2026 07:54:28 -0700 [thread overview]
Message-ID: <20260908145428.GD2619314@frogsfrogsfrogs> (raw)
In-Reply-To: <ap-ecIJjpOrN5jsZ@andromeda.toxiclabs.cc>
On Tue, Sep 08, 2026 at 07:36:34AM +0200, Carlos Maiolino wrote:
> On Fri, Sep 04, 2026 at 06:08:51PM -0700, Darrick J. Wong wrote:
> > On Fri, Sep 04, 2026 at 01:32:21PM +0200, cem@kernel.org wrote:
> > > From: Carlos Maiolino <cem@kernel.org>
> > >
> > > Users could opt to request an error code to be printed
> > >
> > > Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
> > > Signed-off-by: Carlos Maiolino <cem@kernel.org>
> > > ---
> > > fs/xfs/xfs_error.c | 7 ++++++-
> > > fs/xfs/xfs_error.h | 10 +++++-----
> > > fs/xfs/xfs_exchmaps_item.c | 6 +++---
> > > fs/xfs/xfs_inode_item.c | 2 +-
> > > fs/xfs/xfs_log_recover.c | 2 +-
> > > 5 files changed, 16 insertions(+), 11 deletions(-)
> > >
> > > diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
> > > index dbd87e137694..1c882b910ffd 100644
> > > --- a/fs/xfs/xfs_error.c
> > > +++ b/fs/xfs/xfs_error.c
> > > @@ -377,6 +377,7 @@ void
> > > xfs_error_report(
> > > const char *tag,
> > > int level,
> > > + int error,
> > > struct xfs_mount *mp,
> > > const char *filename,
> > > int linenum,
> > > @@ -387,6 +388,10 @@ xfs_error_report(
> > > "Internal error %s at line %d of file %s. Caller %pS",
> > > tag, linenum, filename, failaddr);
> > >
> > > + if (error)
> > > + xfs_alert_tag(mp, XFS_PTAG_ERROR_REPORT,
> > > + "Error Code: %d", error);
> >
> > /me wonders, should the error erport just go in the "Internal error..."
> > message above?
> >
> > "Internal error $tag ($error) at line..."
>
> Sure, I initially didn't want a longer line, but I'd rather have a
> single line here too.
>
> >
> > > +
> > > xfs_stack_trace();
> > > }
> > > }
> > > @@ -404,7 +409,7 @@ xfs_corruption_error(
> > > {
> > > if (buf && level <= xfs_error_level)
> > > xfs_hex_dump(buf, bufsize);
> > > - xfs_error_report(tag, level, mp, filename, linenum, failaddr);
> > > + xfs_error_report(tag, level, 0, mp, filename, linenum, failaddr);
> > > xfs_alert(mp, "Corruption detected. Unmount and run xfs_repair");
> > > }
> > >
> > > diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h
> > > index 0b9c5ba8a598..1a1aa60e92f2 100644
> > > --- a/fs/xfs/xfs_error.h
> > > +++ b/fs/xfs/xfs_error.h
> > > @@ -8,9 +8,9 @@
> > >
> > > struct xfs_mount;
> > >
> > > -extern void xfs_error_report(const char *tag, int level, struct xfs_mount *mp,
> > > - const char *filename, int linenum,
> > > - xfs_failaddr_t failaddr);
> > > +extern void xfs_error_report(const char *tag, int level, int error,
> > > + struct xfs_mount *mp, const char *filename,
> > > + int linenum, xfs_failaddr_t failaddr);
> > > extern void xfs_corruption_error(const char *tag, int level,
> > > struct xfs_mount *mp, const void *buf, size_t bufsize,
> > > const char *filename, int linenum,
> > > @@ -25,8 +25,8 @@ extern void xfs_inode_verifier_error(struct xfs_inode *ip, int error,
> > > const char *name, const void *buf, size_t bufsz,
> > > xfs_failaddr_t failaddr);
> > >
> > > -#define XFS_ERROR_REPORT(e, lvl, mp) \
> > > - xfs_error_report(e, lvl, mp, __FILE__, __LINE__, __return_address)
> > > +#define XFS_ERROR_REPORT(e, lvl, error, mp) \
> > > + xfs_error_report(e, lvl, error, mp, __FILE__, __LINE__, __return_address)
> > > #define XFS_CORRUPTION_ERROR(e, lvl, mp, buf, bufsize) \
> > > xfs_corruption_error(e, lvl, mp, buf, bufsize, \
> > > __FILE__, __LINE__, __return_address)
> > > diff --git a/fs/xfs/xfs_exchmaps_item.c b/fs/xfs/xfs_exchmaps_item.c
> > > index 264a121c5e16..b94c5e5e6549 100644
> > > --- a/fs/xfs/xfs_exchmaps_item.c
> > > +++ b/fs/xfs/xfs_exchmaps_item.c
> > > @@ -559,13 +559,13 @@ xlog_recover_xmi_commit_pass2(
> > >
> > > len = sizeof(struct xfs_xmi_log_format);
> > > if (item->ri_buf[0].i_len != len) {
> > > - XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, log->l_mp);
> > > + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, 0, log->l_mp);
> >
> > These should be -EFSCORRUPTED, not 0, right?
>
> This was a RFC and my goal here was just leave the messages unchanged by
> now, I'll change it for a formal patch.
Oh, ok. On some level it would be fun to wrap all that crap in a macro
so that all -EFSCORRUPTED returns could be a logging site:
#define XFS_EFSCORRUPTED(mp) \
(XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, -EFSCORRUPTED, (mp)),
-EFSCORRUPTED)
return XFS_EFSCORRUPTED(mp);
Eh. I hate preprocessor macros. I'll just call the above a bad idea
and press <Send>.
--D
>
> >
> > --D
> >
> > > return -EFSCORRUPTED;
> > > }
> > >
> > > xmi_formatp = item->ri_buf[0].i_addr;
> > > if (xmi_formatp->__pad != 0) {
> > > - XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, log->l_mp);
> > > + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, 0, log->l_mp);
> > > return -EFSCORRUPTED;
> > > }
> > >
> > > @@ -600,7 +600,7 @@ xlog_recover_xmd_commit_pass2(
> > >
> > > xmd_formatp = item->ri_buf[0].i_addr;
> > > if (item->ri_buf[0].i_len != sizeof(struct xfs_xmd_log_format)) {
> > > - XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, log->l_mp);
> > > + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, 0, log->l_mp);
> > > return -EFSCORRUPTED;
> > > }
> > >
> > > diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
> > > index c6cb0b6b9e46..862b7d7d3ce4 100644
> > > --- a/fs/xfs/xfs_inode_item.c
> > > +++ b/fs/xfs/xfs_inode_item.c
> > > @@ -1185,7 +1185,7 @@ xfs_inode_item_format_convert(
> > > struct xfs_inode_log_format_32 *in_f32 = buf->i_addr;
> > >
> > > if (buf->i_len != sizeof(*in_f32)) {
> > > - XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, NULL);
> > > + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, 0, NULL);
> > > return -EFSCORRUPTED;
> > > }
> > >
> > > diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
> > > index 2f76531842f8..083e4bf61e2b 100644
> > > --- a/fs/xfs/xfs_log_recover.c
> > > +++ b/fs/xfs/xfs_log_recover.c
> > > @@ -2932,7 +2932,7 @@ xlog_recover_process(
> > > * fatal log corruption failure.
> > > */
> > > if (xfs_has_crc(log->l_mp)) {
> > > - XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, log->l_mp);
> > > + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, 0, log->l_mp);
> > > return -EFSCORRUPTED;
> > > }
> > > }
> > > --
> > > 2.55.0
> > >
> > >
> >
>
next prev parent reply other threads:[~2026-09-08 14:54 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-04 11:32 [RFC PATCH 0/3] Log transaction cancel error codes in the kernel log buffer cem
2026-09-04 11:32 ` [RFC PATCH 1/3] xfs: add xfs_error_report the ability to display an error code cem
2026-09-05 1:08 ` Darrick J. Wong
2026-09-07 6:04 ` Christoph Hellwig
2026-09-07 6:39 ` Carlos Maiolino
2026-09-08 5:36 ` Carlos Maiolino
2026-09-08 14:54 ` Darrick J. Wong [this message]
2026-09-04 11:32 ` [RFC PATCH 2/3] xfs: enable xfs_trans_cancel() to report and " cem
2026-09-05 1:10 ` Darrick J. Wong
2026-09-07 6:05 ` Christoph Hellwig
2026-09-08 6:36 ` Carlos Maiolino
2026-09-04 11:32 ` [RFC PATCH 3/3] xfs: make xfs_iomap_write_direct() report an error to xfs_trans_cancel cem
2026-09-05 1:11 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260908145428.GD2619314@frogsfrogsfrogs \
--to=djwong@kernel.org \
--cc=cem@kernel.org \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox