Linux XFS filesystem development
 help / color / mirror / Atom feed
From: Andrey Albershteyn <aalbersh@kernel.org>
To: "Eric Biggers" <ebiggers@kernel.org>,
	"Christoph Hellwig" <hch@lst.de>,
	"Carlos Maiolino" <cem@kernel.org>,
	"fsverity" <fsverity@lists.linux.dev>,
	"linux-xfs" <linux-xfs@vger.kernel.org>
Cc: Andrey Albershteyn <aalbersh@kernel.org>,
	"fsdevel" <linux-fsdevel@vger.kernel.org>,
	david@fromorbit.com, "Darrick J. Wong" <djwong@kernel.org>
Subject: [PATCH v19 03/15] xfs: disable direct read path for fs-verity files
Date: Fri, 20 Nov 2026 16:57:37 +0100	[thread overview]
Message-ID: <20261120155752.192025-4-aalbersh@kernel.org> (raw)
In-Reply-To: <20261120155752.192025-1-aalbersh@kernel.org>

The direct path is not supported on verity files. Attempts to use direct
I/O path on such files should fall back to buffered I/O path.

Add a fall back to buffered I/O at two place, in a common fast path and
latter when lock is acquired. The second check prevents TOCTOU issue
with reading fsverity_active() status and resetting IOCB_DIRECT flag.

If one thread saw fsverity_active() to be false, and then second thread
acquired XFS_IOLOCK_EXCL and enabled fsverity. The first thread will go
through the DIO path.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_file.c | 61 +++++++++++++++++++++++++++++++----------------
 1 file changed, 41 insertions(+), 20 deletions(-)

diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index d61ea8e2c8e4..1171712d3e5b 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -38,6 +38,7 @@
 #include <linux/mount.h>
 #include <linux/filelock.h>
 #include <linux/bio-integrity.h>
+#include <linux/fsverity.h>
 
 static const struct vm_operations_struct xfs_file_vm_ops;
 
@@ -189,6 +190,25 @@ static const struct iomap_dio_ops xfs_dio_read_bounce_ops = {
 	.bio_set	= &iomap_ioend_bioset,
 };
 
+STATIC ssize_t
+xfs_file_buffered_read(
+	struct kiocb		*iocb,
+	struct iov_iter		*to)
+{
+	struct xfs_inode	*ip = XFS_I(file_inode(iocb->ki_filp));
+	ssize_t			ret;
+
+	trace_xfs_file_buffered_read(iocb, to);
+
+	ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED);
+	if (ret)
+		return ret;
+	ret = generic_file_read_iter(iocb, to);
+	xfs_iunlock(ip, XFS_IOLOCK_SHARED);
+
+	return ret;
+}
+
 STATIC ssize_t
 xfs_file_dio_read(
 	struct kiocb		*iocb,
@@ -207,6 +227,17 @@ xfs_file_dio_read(
 	ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED);
 	if (ret)
 		return ret;
+
+	/*
+	 * Re-check verity status after acquiring lock. This prevents TOCTOU in
+	 * xfs_file_read_iter() while falling back from DIO to buffered I/O as
+	 * now we are holding a lock
+	 */
+	if (fsverity_active(VFS_I(ip))) {
+		xfs_iunlock(ip, XFS_IOLOCK_SHARED);
+		iocb->ki_flags &= ~IOCB_DIRECT;
+		return xfs_file_buffered_read(iocb, to);
+	}
 	if (mapping_stable_writes(iocb->ki_filp->f_mapping)) {
 		ret = iomap_dio_rw(iocb, to, xfs_read_iomap_next,
 				&xfs_dio_read_bounce_ops, 0, NULL, 0);
@@ -226,7 +257,8 @@ xfs_file_dax_read(
 	struct kiocb		*iocb,
 	struct iov_iter		*to)
 {
-	struct xfs_inode	*ip = XFS_I(iocb->ki_filp->f_mapping->host);
+	struct inode		*inode = iocb->ki_filp->f_mapping->host;
+	struct xfs_inode	*ip = XFS_I(inode);
 	ssize_t			ret = 0;
 
 	trace_xfs_file_dax_read(iocb, to);
@@ -244,25 +276,6 @@ xfs_file_dax_read(
 	return ret;
 }
 
-STATIC ssize_t
-xfs_file_buffered_read(
-	struct kiocb		*iocb,
-	struct iov_iter		*to)
-{
-	struct xfs_inode	*ip = XFS_I(file_inode(iocb->ki_filp));
-	ssize_t			ret;
-
-	trace_xfs_file_buffered_read(iocb, to);
-
-	ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED);
-	if (ret)
-		return ret;
-	ret = generic_file_read_iter(iocb, to);
-	xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-
-	return ret;
-}
-
 STATIC ssize_t
 xfs_file_read_iter(
 	struct kiocb		*iocb,
@@ -277,6 +290,14 @@ xfs_file_read_iter(
 	if (xfs_is_shutdown(mp))
 		return -EIO;
 
+	/*
+	 * In case fs-verity is enabled, we also fallback to the buffered read
+	 * from the direct read path. Therefore, IOCB_DIRECT is set and need to
+	 * be cleared (see generic_file_read_iter())
+	 */
+	if (fsverity_active(inode))
+		iocb->ki_flags &= ~IOCB_DIRECT;
+
 	if (IS_DAX(inode))
 		ret = xfs_file_dax_read(iocb, to);
 	else if (iocb->ki_flags & IOCB_DIRECT)
-- 
2.54.0


  parent reply	other threads:[~2026-11-20 15:58 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 15:57 [PATCH v19 00/15] fs-verity support for XFS with post EOF merkle tree Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 01/15] xfs: introduce fsverity on-disk changes Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 02/15] xfs: don't allow to enable DAX on fs-verity sealed inode Andrey Albershteyn
2026-11-20 15:57 ` Andrey Albershteyn [this message]
2026-11-20 15:57 ` [PATCH v19 04/15] xfs: don't report dio_mem_align and dio_offset_align for fsverity files Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 05/15] xfs: handle fsverity I/O in write/read path Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 06/15] xfs: use read ioend for fsverity data verification Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 07/15] xfs: add XFS_BMAPI_UNWRITTEN to unmap unwritten extents in __xfs_bunmapi() Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 08/15] xfs: don't remove written extents past EOF on fsverity inodes Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 09/15] xfs: add fs-verity support Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 10/15] xfs: initialize fs-verity on file open Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 11/15] xfs: add fs-verity ioctls Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 12/15] xfs: advertise fs-verity being available on filesystem Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 13/15] xfs: check and repair the verity inode flag state Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 14/15] xfs: introduce health state for corrupted fsverity metadata Andrey Albershteyn
2026-11-20 15:57 ` [PATCH v19 15/15] xfs: enable ro-compat fs-verity flag Andrey Albershteyn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261120155752.192025-4-aalbersh@kernel.org \
    --to=aalbersh@kernel.org \
    --cc=cem@kernel.org \
    --cc=david@fromorbit.com \
    --cc=djwong@kernel.org \
    --cc=ebiggers@kernel.org \
    --cc=fsverity@lists.linux.dev \
    --cc=hch@lst.de \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox