From: Eric Sandeen <sandeen@sandeen.net>
To: Lachlan McIlroy <lachlan@sgi.com>
Cc: xfs@oss.sgi.com
Subject: [PATCH 1/2] - unwrap makefiles (mainline only)
Date: Fri, 08 Feb 2008 23:09:39 -0600 [thread overview]
Message-ID: <47AD3593.1060700@sandeen.net> (raw)
In-Reply-To: <47AD284F.7080603@sandeen.net>
kernel.org git tree "port" of:
Remove Makefile wrappers in XFS
Makefile (and Kbuild) would include Makefile-linux-26
I doubt XFS will really still compile on 2.4; so drop that. This
moves Makefile-linux-26 into Makefile and drops Kbuild.
Also having wrappers as both Kbuild and Makefile seemed redundant
anyways.
The patch is relatively large because it renames a file, but
no functional changes.
Signed-off-by: Andi Kleen <ak@suse.de <mailto:ak@suse.de>>
Merge of xfs-linux-melb:xfs-kern:29781a by kenmcd.
Remove Makefile wrappers in XFS.
Index: linux-2.6/fs/xfs/Kbuild
===================================================================
--- linux-2.6.orig/fs/xfs/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# The xfs people like to share Makefile with 2.6 and 2.4.
-# Utilise file named Kbuild file which has precedence over Makefile.
-#
-
-include $(srctree)/$(obj)/Makefile-linux-2.6
Index: linux-2.6/fs/xfs/Makefile
===================================================================
--- linux-2.6.orig/fs/xfs/Makefile
+++ linux-2.6/fs/xfs/Makefile
@@ -1 +1,117 @@
-include $(TOPDIR)/fs/xfs/Makefile-linux-$(VERSION).$(PATCHLEVEL)
+#
+# Copyright (c) 2000-2005 Silicon Graphics, Inc.
+# All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+EXTRA_CFLAGS += -Ifs/xfs -Ifs/xfs/linux-2.6 -funsigned-char
+
+XFS_LINUX := linux-2.6
+
+ifeq ($(CONFIG_XFS_DEBUG),y)
+ EXTRA_CFLAGS += -g
+endif
+
+obj-$(CONFIG_XFS_FS) += xfs.o
+
+xfs-$(CONFIG_XFS_QUOTA) += $(addprefix quota/, \
+ xfs_dquot.o \
+ xfs_dquot_item.o \
+ xfs_trans_dquot.o \
+ xfs_qm_syscalls.o \
+ xfs_qm_bhv.o \
+ xfs_qm.o)
+
+ifeq ($(CONFIG_XFS_QUOTA),y)
+xfs-$(CONFIG_PROC_FS) += quota/xfs_qm_stats.o
+endif
+
+xfs-$(CONFIG_XFS_RT) += xfs_rtalloc.o
+xfs-$(CONFIG_XFS_POSIX_ACL) += xfs_acl.o
+xfs-$(CONFIG_PROC_FS) += $(XFS_LINUX)/xfs_stats.o
+xfs-$(CONFIG_SYSCTL) += $(XFS_LINUX)/xfs_sysctl.o
+xfs-$(CONFIG_COMPAT) += $(XFS_LINUX)/xfs_ioctl32.o
+
+
+xfs-y += xfs_alloc.o \
+ xfs_alloc_btree.o \
+ xfs_attr.o \
+ xfs_attr_leaf.o \
+ xfs_bit.o \
+ xfs_bmap.o \
+ xfs_bmap_btree.o \
+ xfs_btree.o \
+ xfs_buf_item.o \
+ xfs_da_btree.o \
+ xfs_dir2.o \
+ xfs_dir2_block.o \
+ xfs_dir2_data.o \
+ xfs_dir2_leaf.o \
+ xfs_dir2_node.o \
+ xfs_dir2_sf.o \
+ xfs_error.o \
+ xfs_extfree_item.o \
+ xfs_filestream.o \
+ xfs_fsops.o \
+ xfs_ialloc.o \
+ xfs_ialloc_btree.o \
+ xfs_iget.o \
+ xfs_inode.o \
+ xfs_inode_item.o \
+ xfs_iomap.o \
+ xfs_itable.o \
+ xfs_dfrag.o \
+ xfs_log.o \
+ xfs_log_recover.o \
+ xfs_mount.o \
+ xfs_mru_cache.o \
+ xfs_rename.o \
+ xfs_trans.o \
+ xfs_trans_ail.o \
+ xfs_trans_buf.o \
+ xfs_trans_extfree.o \
+ xfs_trans_inode.o \
+ xfs_trans_item.o \
+ xfs_utils.o \
+ xfs_vfsops.o \
+ xfs_vnodeops.o \
+ xfs_rw.o \
+ xfs_dmops.o \
+ xfs_qmops.o
+
+xfs-$(CONFIG_XFS_TRACE) += xfs_dir2_trace.o
+
+# Objects in linux/
+xfs-y += $(addprefix $(XFS_LINUX)/, \
+ kmem.o \
+ xfs_aops.o \
+ xfs_buf.o \
+ xfs_export.o \
+ xfs_file.o \
+ xfs_fs_subr.o \
+ xfs_globals.o \
+ xfs_ioctl.o \
+ xfs_iops.o \
+ xfs_lrw.o \
+ xfs_super.o \
+ xfs_vnode.o)
+
+# Objects in support/
+xfs-y += $(addprefix support/, \
+ debug.o \
+ uuid.o)
+
+xfs-$(CONFIG_XFS_TRACE) += support/ktrace.o
+
Index: linux-2.6/fs/xfs/Makefile-linux-2.6
===================================================================
--- linux-2.6.orig/fs/xfs/Makefile-linux-2.6
+++ /dev/null
@@ -1,117 +0,0 @@
-#
-# Copyright (c) 2000-2005 Silicon Graphics, Inc.
-# All Rights Reserved.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it would be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-
-EXTRA_CFLAGS += -Ifs/xfs -Ifs/xfs/linux-2.6 -funsigned-char
-
-XFS_LINUX := linux-2.6
-
-ifeq ($(CONFIG_XFS_DEBUG),y)
- EXTRA_CFLAGS += -g
-endif
-
-obj-$(CONFIG_XFS_FS) += xfs.o
-
-xfs-$(CONFIG_XFS_QUOTA) += $(addprefix quota/, \
- xfs_dquot.o \
- xfs_dquot_item.o \
- xfs_trans_dquot.o \
- xfs_qm_syscalls.o \
- xfs_qm_bhv.o \
- xfs_qm.o)
-
-ifeq ($(CONFIG_XFS_QUOTA),y)
-xfs-$(CONFIG_PROC_FS) += quota/xfs_qm_stats.o
-endif
-
-xfs-$(CONFIG_XFS_RT) += xfs_rtalloc.o
-xfs-$(CONFIG_XFS_POSIX_ACL) += xfs_acl.o
-xfs-$(CONFIG_PROC_FS) += $(XFS_LINUX)/xfs_stats.o
-xfs-$(CONFIG_SYSCTL) += $(XFS_LINUX)/xfs_sysctl.o
-xfs-$(CONFIG_COMPAT) += $(XFS_LINUX)/xfs_ioctl32.o
-
-
-xfs-y += xfs_alloc.o \
- xfs_alloc_btree.o \
- xfs_attr.o \
- xfs_attr_leaf.o \
- xfs_bit.o \
- xfs_bmap.o \
- xfs_bmap_btree.o \
- xfs_btree.o \
- xfs_buf_item.o \
- xfs_da_btree.o \
- xfs_dir2.o \
- xfs_dir2_block.o \
- xfs_dir2_data.o \
- xfs_dir2_leaf.o \
- xfs_dir2_node.o \
- xfs_dir2_sf.o \
- xfs_error.o \
- xfs_extfree_item.o \
- xfs_filestream.o \
- xfs_fsops.o \
- xfs_ialloc.o \
- xfs_ialloc_btree.o \
- xfs_iget.o \
- xfs_inode.o \
- xfs_inode_item.o \
- xfs_iomap.o \
- xfs_itable.o \
- xfs_dfrag.o \
- xfs_log.o \
- xfs_log_recover.o \
- xfs_mount.o \
- xfs_mru_cache.o \
- xfs_rename.o \
- xfs_trans.o \
- xfs_trans_ail.o \
- xfs_trans_buf.o \
- xfs_trans_extfree.o \
- xfs_trans_inode.o \
- xfs_trans_item.o \
- xfs_utils.o \
- xfs_vfsops.o \
- xfs_vnodeops.o \
- xfs_rw.o \
- xfs_dmops.o \
- xfs_qmops.o
-
-xfs-$(CONFIG_XFS_TRACE) += xfs_dir2_trace.o
-
-# Objects in linux/
-xfs-y += $(addprefix $(XFS_LINUX)/, \
- kmem.o \
- xfs_aops.o \
- xfs_buf.o \
- xfs_export.o \
- xfs_file.o \
- xfs_fs_subr.o \
- xfs_globals.o \
- xfs_ioctl.o \
- xfs_iops.o \
- xfs_lrw.o \
- xfs_super.o \
- xfs_vnode.o)
-
-# Objects in support/
-xfs-y += $(addprefix support/, \
- debug.o \
- uuid.o)
-
-xfs-$(CONFIG_XFS_TRACE) += support/ktrace.o
-
next prev parent reply other threads:[~2008-02-09 5:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-08 2:27 [GIT PULL] XFS update for 2.6.25 Lachlan McIlroy
2008-02-09 4:13 ` Eric Sandeen
2008-02-09 4:56 ` Christoph Hellwig
2008-02-09 4:58 ` Eric Sandeen
2008-02-09 5:03 ` Christoph Hellwig
2008-02-09 5:09 ` Eric Sandeen [this message]
2008-02-09 5:13 ` [PATCH 2/2] fix up out of tree builds (mainline only) Eric Sandeen
2008-02-11 4:57 ` [GIT PULL] XFS update for 2.6.25 Lachlan McIlroy
2008-02-11 4:57 ` Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47AD3593.1060700@sandeen.net \
--to=sandeen@sandeen.net \
--cc=lachlan@sgi.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox