* Re: [XFS Punch Hole 1/1] XFS Add Punch Hole Testing to FSX [not found] <4DBF02FF.608@linux.vnet.ibm.com> @ 2011-05-02 19:23 ` Eric Sandeen 2011-05-02 19:35 ` Eric Sandeen 0 siblings, 1 reply; 4+ messages in thread From: Eric Sandeen @ 2011-05-02 19:23 UTC (permalink / raw) To: Allison Henderson; +Cc: linux-fsdevel, Ext4 Developers List, xfs-oss On 5/2/11 2:16 PM, Allison Henderson wrote: > This patch adds punch hole tests to the fsx > stress test. The test is performed through > the fallocate call by randomly choosing to > use the punch hole flag when running the > fallocate test. Regions that have > been punched out should contain zeros, so > the expected file contents buffer is updated > to contain zeros when a hole is punched out. I'll cc: the xfs list since this would live in xfstests. Thanks, -Eric > Signed-off-by: Allison Henderson <achender@us.ibm.com> > --- > :100644 100644 32cd380... d424941... M ltp/Makefile > :100644 100644 fe072d3... 4f54ef6... M ltp/fsx.c > ltp/Makefile | 2 +- > ltp/fsx.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++--------- > 2 files changed, 62 insertions(+), 13 deletions(-) > > diff --git a/ltp/Makefile b/ltp/Makefile > index 32cd380..d424941 100644 > --- a/ltp/Makefile > +++ b/ltp/Makefile > @@ -27,7 +27,7 @@ LCFLAGS += -DAIO > LLDLIBS += -laio -lpthread > endif > > -ifeq ($(HAVE_FALLOCATE), true) > +ifeq ($(HAVE_FALLOCATE), yes) > LCFLAGS += -DFALLOCATE > endif > > diff --git a/ltp/fsx.c b/ltp/fsx.c > index fe072d3..4f54ef6 100644 > --- a/ltp/fsx.c > +++ b/ltp/fsx.c > @@ -207,7 +207,8 @@ logdump(void) > { > int i, count, down; > struct log_entry *lp; > - char *falloc_type[3] = {"PAST_EOF", "EXTENDING", "INTERIOR"}; > + char *falloc_type[4] = {"PAST_EOF", "EXTENDING", "INTERIOR", > + "PUNCH_HOLE"}; > > prt("LOG DUMP (%d total operations):\n", logcount); > if (logcount < LOGSIZE) { > @@ -791,7 +792,11 @@ dofallocate(unsigned offset, unsigned length) > { > unsigned end_offset; > int keep_size; > - > + int max_offset = 0; > + int max_len = 0; > + int punch_hole = 0; > + int mode = 0; > + char *op_name; > if (length == 0) { > if (!quiet && testcalls > simulatedopcount) > prt("skipping zero length fallocate\n"); > @@ -799,11 +804,31 @@ dofallocate(unsigned offset, unsigned length) > return; > } > > +#ifdef FALLOC_FL_PUNCH_HOLE > + punch_hole = random() % 2; > + /* Keep size must be set for punch hole */ > + if (punch_hole) { > + keep_size = 1; > + mode = FALLOC_FL_PUNCH_HOLE; > + } else > + keep_size = random() % 2; > +#else > keep_size = random() % 2; > +#endif > + > + if (keep_size) > + mode |= FALLOC_FL_KEEP_SIZE; > + > + if (punch_hole && file_size <= (loff_t)offset) { > + if (!quiet && testcalls > simulatedopcount) > + prt("skipping hole punch off the end of the file\n"); > + log4(OP_SKIPPED, OP_FALLOCATE, offset, length); > + return; > + } > > end_offset = keep_size ? 0 : offset + length; > > - if (end_offset > biggest) { > + if ((end_offset > biggest) && !punch_hole) { > biggest = end_offset; > if (!quiet && testcalls > simulatedopcount) > prt("fallocating to largest ever: 0x%x\n", end_offset); > @@ -811,13 +836,15 @@ dofallocate(unsigned offset, unsigned length) > > /* > * last arg: > - * 1: allocate past EOF > - * 2: extending prealloc > - * 3: interior prealloc > + * 0: allocate past EOF > + * 1: extending prealloc > + * 2: interior prealloc > + * 3: punch hole > */ > - log4(OP_FALLOCATE, offset, length, (end_offset > file_size) ? (keep_size ? 1 : 2) : 3); > + log4(OP_FALLOCATE, offset, length, punch_hole ? 3 : > + (end_offset > file_size) ? (keep_size ? 0 : 1) : 2); > > - if (end_offset > file_size) { > + if (((loff_t)end_offset > file_size) && !punch_hole) { > memset(good_buf + file_size, '\0', end_offset - file_size); > file_size = end_offset; > } > @@ -827,13 +854,35 @@ dofallocate(unsigned offset, unsigned length) > > if ((progressinterval && testcalls % progressinterval == 0) || > (debug && (monitorstart == -1 || monitorend == -1 || > - end_offset <= monitorend))) > - prt("%lu falloc\tfrom 0x%x to 0x%x\n", testcalls, offset, length); > - if (fallocate(fd, keep_size ? FALLOC_FL_KEEP_SIZE : 0, (loff_t)offset, (loff_t)length) == -1) { > - prt("fallocate: %x to %x\n", offset, length); > + end_offset <= monitorend))) { > +#ifdef FALLOC_FL_PUNCH_HOLE > + op_name = (mode & FALLOC_FL_PUNCH_HOLE) ? > + "punch hole" : "falloc"; > +#else > + op_name = "falloc"; > +#endif > + prt("%lu %s\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls, > + op_name, offset, offset+length, length); > + } > + if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) { > +#ifdef FALLOC_FL_PUNCH_HOLE > + op_name = (mode & FALLOC_FL_PUNCH_HOLE) ? > + "punch hole" : "fallocate"; > +#else > + op_name = "fallocate"; > +#endif > + > + prt("%s: %x to %x\n", op_name, offset, length); > prterr("dofallocate: fallocate"); > report_failure(161); > } > + > + if (punch_hole) { > + max_offset = offset < file_size ? offset : file_size; > + max_len = max_offset + length <= file_size ? length : > + file_size - max_offset; > + memset(good_buf + max_offset, '\0', max_len); > + } > } > #else > void _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [XFS Punch Hole 1/1] XFS Add Punch Hole Testing to FSX 2011-05-02 19:23 ` [XFS Punch Hole 1/1] XFS Add Punch Hole Testing to FSX Eric Sandeen @ 2011-05-02 19:35 ` Eric Sandeen 2011-05-02 20:29 ` Andreas Dilger 0 siblings, 1 reply; 4+ messages in thread From: Eric Sandeen @ 2011-05-02 19:35 UTC (permalink / raw) To: Allison Henderson; +Cc: linux-fsdevel, Ext4 Developers List, xfs-oss On 5/2/11 2:23 PM, Eric Sandeen wrote: > On 5/2/11 2:16 PM, Allison Henderson wrote: >> This patch adds punch hole tests to the fsx >> stress test. The test is performed through >> the fallocate call by randomly choosing to >> use the punch hole flag when running the >> fallocate test. Regions that have >> been punched out should contain zeros, so >> the expected file contents buffer is updated >> to contain zeros when a hole is punched out. > > I'll cc: the xfs list since this would live in xfstests. > > Thanks, > -Eric > >> Signed-off-by: Allison Henderson <achender@us.ibm.com> >> --- >> :100644 100644 32cd380... d424941... M ltp/Makefile >> :100644 100644 fe072d3... 4f54ef6... M ltp/fsx.c >> ltp/Makefile | 2 +- >> ltp/fsx.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++--------- >> 2 files changed, 62 insertions(+), 13 deletions(-) >> >> diff --git a/ltp/Makefile b/ltp/Makefile >> index 32cd380..d424941 100644 >> --- a/ltp/Makefile >> +++ b/ltp/Makefile >> @@ -27,7 +27,7 @@ LCFLAGS += -DAIO >> LLDLIBS += -laio -lpthread >> endif >> >> -ifeq ($(HAVE_FALLOCATE), true) >> +ifeq ($(HAVE_FALLOCATE), yes) argh I ended up with 2 fallocate tests in aclocal.m4, need to tidy that up, I'll do that in a separate patch. >> LCFLAGS += -DFALLOCATE >> endif >> >> diff --git a/ltp/fsx.c b/ltp/fsx.c >> index fe072d3..4f54ef6 100644 >> --- a/ltp/fsx.c >> +++ b/ltp/fsx.c >> @@ -207,7 +207,8 @@ logdump(void) >> { >> int i, count, down; >> struct log_entry *lp; >> - char *falloc_type[3] = {"PAST_EOF", "EXTENDING", "INTERIOR"}; >> + char *falloc_type[4] = {"PAST_EOF", "EXTENDING", "INTERIOR", >> + "PUNCH_HOLE"}; >> >> prt("LOG DUMP (%d total operations):\n", logcount); >> if (logcount < LOGSIZE) { >> @@ -791,7 +792,11 @@ dofallocate(unsigned offset, unsigned length) >> { >> unsigned end_offset; >> int keep_size; >> - >> + int max_offset = 0; >> + int max_len = 0; >> + int punch_hole = 0; >> + int mode = 0; >> + char *op_name; >> if (length == 0) { >> if (!quiet && testcalls > simulatedopcount) >> prt("skipping zero length fallocate\n"); >> @@ -799,11 +804,31 @@ dofallocate(unsigned offset, unsigned length) >> return; >> } >> >> +#ifdef FALLOC_FL_PUNCH_HOLE >> + punch_hole = random() % 2; >> + /* Keep size must be set for punch hole */ >> + if (punch_hole) { >> + keep_size = 1; >> + mode = FALLOC_FL_PUNCH_HOLE; >> + } else >> + keep_size = random() % 2; >> +#else >> keep_size = random() % 2; >> +#endif >> + >> + if (keep_size) >> + mode |= FALLOC_FL_KEEP_SIZE; >> + >> + if (punch_hole && file_size <= (loff_t)offset) { >> + if (!quiet && testcalls > simulatedopcount) >> + prt("skipping hole punch off the end of the file\n"); >> + log4(OP_SKIPPED, OP_FALLOCATE, offset, length); >> + return; >> + } >> >> end_offset = keep_size ? 0 : offset + length; >> >> - if (end_offset > biggest) { >> + if ((end_offset > biggest) && !punch_hole) { >> biggest = end_offset; >> if (!quiet && testcalls > simulatedopcount) >> prt("fallocating to largest ever: 0x%x\n", end_offset); >> @@ -811,13 +836,15 @@ dofallocate(unsigned offset, unsigned length) >> >> /* >> * last arg: >> - * 1: allocate past EOF >> - * 2: extending prealloc >> - * 3: interior prealloc >> + * 0: allocate past EOF >> + * 1: extending prealloc >> + * 2: interior prealloc >> + * 3: punch hole >> */ >> - log4(OP_FALLOCATE, offset, length, (end_offset > file_size) ? (keep_size ? 1 : 2) : 3); >> + log4(OP_FALLOCATE, offset, length, punch_hole ? 3 : >> + (end_offset > file_size) ? (keep_size ? 0 : 1) : 2); >> >> - if (end_offset > file_size) { >> + if (((loff_t)end_offset > file_size) && !punch_hole) { >> memset(good_buf + file_size, '\0', end_offset - file_size); >> file_size = end_offset; >> } >> @@ -827,13 +854,35 @@ dofallocate(unsigned offset, unsigned length) >> >> if ((progressinterval && testcalls % progressinterval == 0) || >> (debug && (monitorstart == -1 || monitorend == -1 || >> - end_offset <= monitorend))) >> - prt("%lu falloc\tfrom 0x%x to 0x%x\n", testcalls, offset, length); >> - if (fallocate(fd, keep_size ? FALLOC_FL_KEEP_SIZE : 0, (loff_t)offset, (loff_t)length) == -1) { >> - prt("fallocate: %x to %x\n", offset, length); >> + end_offset <= monitorend))) { >> +#ifdef FALLOC_FL_PUNCH_HOLE >> + op_name = (mode & FALLOC_FL_PUNCH_HOLE) ? >> + "punch hole" : "falloc"; >> +#else >> + op_name = "falloc"; >> +#endif >> + prt("%lu %s\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls, >> + op_name, offset, offset+length, length); >> + } >> + if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) { >> +#ifdef FALLOC_FL_PUNCH_HOLE >> + op_name = (mode & FALLOC_FL_PUNCH_HOLE) ? >> + "punch hole" : "fallocate"; >> +#else >> + op_name = "fallocate"; >> +#endif >> + >> + prt("%s: %x to %x\n", op_name, offset, length); >> prterr("dofallocate: fallocate"); >> report_failure(161); >> } >> + >> + if (punch_hole) { >> + max_offset = offset < file_size ? offset : file_size; >> + max_len = max_offset + length <= file_size ? length : >> + file_size - max_offset; >> + memset(good_buf + max_offset, '\0', max_len); >> + } >> } >> #else >> void > > -- > To unsubscribe from this list: send the line "unsubscribe linux-ext4" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [XFS Punch Hole 1/1] XFS Add Punch Hole Testing to FSX 2011-05-02 19:35 ` Eric Sandeen @ 2011-05-02 20:29 ` Andreas Dilger 2011-05-02 22:39 ` Allison Henderson 0 siblings, 1 reply; 4+ messages in thread From: Andreas Dilger @ 2011-05-02 20:29 UTC (permalink / raw) To: Eric Sandeen Cc: linux-fsdevel, xfs-oss, Ext4 Developers List, Allison Henderson On 5/2/11 2:16 PM, Allison Henderson wrote: > This patch adds punch hole tests to the fsx > stress test. The test is performed through > the fallocate call by randomly choosing to > use the punch hole flag when running the > fallocate test. Regions that have > been punched out should contain zeros, so > the expected file contents buffer is updated > to contain zeros when a hole is punched out. > > Signed-off-by: Allison Henderson <achender@us.ibm.com> > --- > :100644 100644 32cd380... d424941... M ltp/Makefile > :100644 100644 fe072d3... 4f54ef6... M ltp/fsx.c > ltp/Makefile | 2 +- > ltp/fsx.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++--------- > 2 files changed, 62 insertions(+), 13 deletions(-) > > diff --git a/ltp/Makefile b/ltp/Makefile > index 32cd380..d424941 100644 > --- a/ltp/Makefile > +++ b/ltp/Makefile > @@ -27,7 +27,7 @@ LCFLAGS += -DAIO > LLDLIBS += -laio -lpthread > endif > > -ifeq ($(HAVE_FALLOCATE), true) > +ifeq ($(HAVE_FALLOCATE), yes) > > LCFLAGS += -DFALLOCATE > endif > > diff --git a/ltp/fsx.c b/ltp/fsx.c > index fe072d3..4f54ef6 100644 > --- a/ltp/fsx.c > +++ b/ltp/fsx.c > @@ -207,7 +207,8 @@ logdump(void) > { > int i, count, down; > struct log_entry *lp; > - char *falloc_type[3] = {"PAST_EOF", "EXTENDING", "INTERIOR"}; > + char *falloc_type[4] = {"PAST_EOF", "EXTENDING", "INTERIOR", > + "PUNCH_HOLE"}; > > prt("LOG DUMP (%d total operations):\n", logcount); > if (logcount < LOGSIZE) { > @@ -791,7 +792,11 @@ dofallocate(unsigned offset, unsigned length) > { > unsigned end_offset; > int keep_size; > - > + int max_offset = 0; > + int max_len = 0; > + int punch_hole = 0; > + int mode = 0; > + char *op_name; > if (length == 0) { > if (!quiet && testcalls > simulatedopcount) > prt("skipping zero length fallocate\n"); > @@ -799,11 +804,31 @@ dofallocate(unsigned offset, unsigned length) > return; > } > > +#ifdef FALLOC_FL_PUNCH_HOLE > + punch_hole = random() % 2; > + /* Keep size must be set for punch hole */ > + if (punch_hole) { > + keep_size = 1; > + mode = FALLOC_FL_PUNCH_HOLE; > + } else > + keep_size = random() % 2; > +#else > keep_size = random() % 2; > +#endif > + > + if (keep_size) > + mode |= FALLOC_FL_KEEP_SIZE; > + > + if (punch_hole && file_size <= (loff_t)offset) { > + if (!quiet && testcalls > simulatedopcount) > + prt("skipping hole punch off the end of the file\n"); > + log4(OP_SKIPPED, OP_FALLOCATE, offset, length); > + return; > + } Isn't a hole punch off the end of the file is just a truncate? I think that is a valid test case, since punch(newsize, ~0ULL) should be identical to truncate(newsize). In that case, "keep_size" would affect whether the file size is left alone, or it is now "newsize", so I don't think it should always be set to run with keep_size = 1 for FALLOC_FL_PUNCH_HOLE operations. > end_offset = keep_size ? 0 : offset + length; > > - if (end_offset > biggest) { > + if ((end_offset > biggest) && !punch_hole) { > biggest = end_offset; > if (!quiet && testcalls > simulatedopcount) > prt("fallocating to largest ever: 0x%x\n", end_offset); > @@ -811,13 +836,15 @@ dofallocate(unsigned offset, unsigned length) > > /* > * last arg: > - * 1: allocate past EOF > - * 2: extending prealloc > - * 3: interior prealloc > + * 0: allocate past EOF > + * 1: extending prealloc > + * 2: interior prealloc > + * 3: punch hole > */ > - log4(OP_FALLOCATE, offset, length, (end_offset > file_size) ? (keep_size ? 1 : 2) : 3); > + log4(OP_FALLOCATE, offset, length, punch_hole ? 3 : > + (end_offset > file_size) ? (keep_size ? 0 : 1) : 2); > > - if (end_offset > file_size) { > + if (((loff_t)end_offset > file_size) && !punch_hole) { > memset(good_buf + file_size, '\0', end_offset - file_size); > file_size = end_offset; > } > @@ -827,13 +854,35 @@ dofallocate(unsigned offset, unsigned length) > > if ((progressinterval && testcalls % progressinterval == 0) || > (debug && (monitorstart == -1 || monitorend == -1 || > - end_offset <= monitorend))) > - prt("%lu falloc\tfrom 0x%x to 0x%x\n", testcalls, offset, length); > - if (fallocate(fd, keep_size ? FALLOC_FL_KEEP_SIZE : 0, (loff_t)offset, (loff_t)length) == -1) { > - prt("fallocate: %x to %x\n", offset, length); > + end_offset <= monitorend))) { > +#ifdef FALLOC_FL_PUNCH_HOLE > + op_name = (mode & FALLOC_FL_PUNCH_HOLE) ? > + "punch hole" : "falloc"; > +#else > + op_name = "falloc"; > +#endif > + prt("%lu %s\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls, > + op_name, offset, offset+length, length); > + } > + if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) { > +#ifdef FALLOC_FL_PUNCH_HOLE > + op_name = (mode & FALLOC_FL_PUNCH_HOLE) ? > + "punch hole" : "fallocate"; > +#else > + op_name = "fallocate"; > +#endif > + > + prt("%s: %x to %x\n", op_name, offset, length); > prterr("dofallocate: fallocate"); > report_failure(161); > } > + > + if (punch_hole) { > + max_offset = offset < file_size ? offset : file_size; > + max_len = max_offset + length <= file_size ? length : > + file_size - max_offset; > + memset(good_buf + max_offset, '\0', max_len); > + } > } > #else > void Cheers, Andreas _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [XFS Punch Hole 1/1] XFS Add Punch Hole Testing to FSX 2011-05-02 20:29 ` Andreas Dilger @ 2011-05-02 22:39 ` Allison Henderson 0 siblings, 0 replies; 4+ messages in thread From: Allison Henderson @ 2011-05-02 22:39 UTC (permalink / raw) To: Andreas Dilger; +Cc: linux-fsdevel, Eric Sandeen, Ext4 Developers List, xfs-oss On 5/2/2011 1:29 PM, Andreas Dilger wrote: > On 5/2/11 2:16 PM, Allison Henderson wrote: >> This patch adds punch hole tests to the fsx >> stress test. The test is performed through >> the fallocate call by randomly choosing to >> use the punch hole flag when running the >> fallocate test. Regions that have >> been punched out should contain zeros, so >> the expected file contents buffer is updated >> to contain zeros when a hole is punched out. >> >> Signed-off-by: Allison Henderson<achender@us.ibm.com> >> --- >> :100644 100644 32cd380... d424941... M ltp/Makefile >> :100644 100644 fe072d3... 4f54ef6... M ltp/fsx.c >> ltp/Makefile | 2 +- >> ltp/fsx.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++--------- >> 2 files changed, 62 insertions(+), 13 deletions(-) >> >> diff --git a/ltp/Makefile b/ltp/Makefile >> index 32cd380..d424941 100644 >> --- a/ltp/Makefile >> +++ b/ltp/Makefile >> @@ -27,7 +27,7 @@ LCFLAGS += -DAIO >> LLDLIBS += -laio -lpthread >> endif >> >> -ifeq ($(HAVE_FALLOCATE), true) >> +ifeq ($(HAVE_FALLOCATE), yes) >> > >> LCFLAGS += -DFALLOCATE >> endif >> >> diff --git a/ltp/fsx.c b/ltp/fsx.c >> index fe072d3..4f54ef6 100644 >> --- a/ltp/fsx.c >> +++ b/ltp/fsx.c >> @@ -207,7 +207,8 @@ logdump(void) >> { >> int i, count, down; >> struct log_entry *lp; >> - char *falloc_type[3] = {"PAST_EOF", "EXTENDING", "INTERIOR"}; >> + char *falloc_type[4] = {"PAST_EOF", "EXTENDING", "INTERIOR", >> + "PUNCH_HOLE"}; >> >> prt("LOG DUMP (%d total operations):\n", logcount); >> if (logcount< LOGSIZE) { >> @@ -791,7 +792,11 @@ dofallocate(unsigned offset, unsigned length) >> { >> unsigned end_offset; >> int keep_size; >> - >> + int max_offset = 0; >> + int max_len = 0; >> + int punch_hole = 0; >> + int mode = 0; >> + char *op_name; >> if (length == 0) { >> if (!quiet&& testcalls> simulatedopcount) >> prt("skipping zero length fallocate\n"); >> @@ -799,11 +804,31 @@ dofallocate(unsigned offset, unsigned length) >> return; >> } >> >> +#ifdef FALLOC_FL_PUNCH_HOLE >> + punch_hole = random() % 2; >> + /* Keep size must be set for punch hole */ >> + if (punch_hole) { >> + keep_size = 1; >> + mode = FALLOC_FL_PUNCH_HOLE; >> + } else >> + keep_size = random() % 2; >> +#else >> keep_size = random() % 2; >> +#endif >> + >> + if (keep_size) >> + mode |= FALLOC_FL_KEEP_SIZE; >> + >> + if (punch_hole&& file_size<= (loff_t)offset) { >> + if (!quiet&& testcalls> simulatedopcount) >> + prt("skipping hole punch off the end of the file\n"); >> + log4(OP_SKIPPED, OP_FALLOCATE, offset, length); >> + return; >> + } > > Isn't a hole punch off the end of the file is just a truncate? I think that is a valid test case, since punch(newsize, ~0ULL) should be identical to truncate(newsize). In that case, "keep_size" would affect whether the file size is left alone, or it is now "newsize", so I don't think it should always be set to run with keep_size = 1 for FALLOC_FL_PUNCH_HOLE operations. Hi there, Well actually punch hole requires that the keep size flag be set when using the punch hole flag, so it's not quite the same as truncate. The punch hole operation does not modify the length of the file, it only changes whether or not the specified blocks are allocated. So a hole that extends off the end of the file would cause the last few blocks of the file to be released, but the length of the file would not shrink. The above code snippet though is checking to see if the entire hole is off the edge of the file. For example, the file is 3 blocks in length, but we are trying to punch out blocks 5 though 7. This operation would have no effect, so we skip it here. Allison Henderson > >> end_offset = keep_size ? 0 : offset + length; >> >> - if (end_offset> biggest) { >> + if ((end_offset> biggest)&& !punch_hole) { >> biggest = end_offset; >> if (!quiet&& testcalls> simulatedopcount) >> prt("fallocating to largest ever: 0x%x\n", end_offset); >> @@ -811,13 +836,15 @@ dofallocate(unsigned offset, unsigned length) >> >> /* >> * last arg: >> - * 1: allocate past EOF >> - * 2: extending prealloc >> - * 3: interior prealloc >> + * 0: allocate past EOF >> + * 1: extending prealloc >> + * 2: interior prealloc >> + * 3: punch hole >> */ >> - log4(OP_FALLOCATE, offset, length, (end_offset> file_size) ? (keep_size ? 1 : 2) : 3); >> + log4(OP_FALLOCATE, offset, length, punch_hole ? 3 : >> + (end_offset> file_size) ? (keep_size ? 0 : 1) : 2); >> >> - if (end_offset> file_size) { >> + if (((loff_t)end_offset> file_size)&& !punch_hole) { >> memset(good_buf + file_size, '\0', end_offset - file_size); >> file_size = end_offset; >> } >> @@ -827,13 +854,35 @@ dofallocate(unsigned offset, unsigned length) >> >> if ((progressinterval&& testcalls % progressinterval == 0) || >> (debug&& (monitorstart == -1 || monitorend == -1 || >> - end_offset<= monitorend))) >> - prt("%lu falloc\tfrom 0x%x to 0x%x\n", testcalls, offset, length); >> - if (fallocate(fd, keep_size ? FALLOC_FL_KEEP_SIZE : 0, (loff_t)offset, (loff_t)length) == -1) { >> - prt("fallocate: %x to %x\n", offset, length); >> + end_offset<= monitorend))) { >> +#ifdef FALLOC_FL_PUNCH_HOLE >> + op_name = (mode& FALLOC_FL_PUNCH_HOLE) ? >> + "punch hole" : "falloc"; >> +#else >> + op_name = "falloc"; >> +#endif >> + prt("%lu %s\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls, >> + op_name, offset, offset+length, length); >> + } >> + if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) { >> +#ifdef FALLOC_FL_PUNCH_HOLE >> + op_name = (mode& FALLOC_FL_PUNCH_HOLE) ? >> + "punch hole" : "fallocate"; >> +#else >> + op_name = "fallocate"; >> +#endif >> + >> + prt("%s: %x to %x\n", op_name, offset, length); >> prterr("dofallocate: fallocate"); >> report_failure(161); >> } >> + >> + if (punch_hole) { >> + max_offset = offset< file_size ? offset : file_size; >> + max_len = max_offset + length<= file_size ? length : >> + file_size - max_offset; >> + memset(good_buf + max_offset, '\0', max_len); >> + } >> } >> #else >> void > > > Cheers, Andreas > > > > > _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-05-02 22:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <4DBF02FF.608@linux.vnet.ibm.com>
2011-05-02 19:23 ` [XFS Punch Hole 1/1] XFS Add Punch Hole Testing to FSX Eric Sandeen
2011-05-02 19:35 ` Eric Sandeen
2011-05-02 20:29 ` Andreas Dilger
2011-05-02 22:39 ` Allison Henderson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox