[PATCH v3 2/2] xfstests: introduce 280 for SEEK_DATA/SEEK_HOLE copy test

Jeff Liu
2012-02-19T14:52:03Z

Introduce 280 for SEEK_DATA/SEEK_HOLE copy tests.

Thanks Dave's suggestions for V2. :)

Changes to v3:
--------------
* Using xfs_io(8) to create sparse file, seek_copy_test was modified to only do extents copy accordingly.
* Redirect xfs_io(8) output to 280.full.
* Supplied two test cases for now. The first test case is focus on copy a sparse file with written data and hole extents.
The 2nd test case is focus on copy a sparse file with written, unwritten data as well as hole extents.
I would continue to improve this tests when implementing the unwritten extents probe routine.

Signed-off-by: Jie Liu <jeff.liu@oracle.com>

---
280 | 114 +++++++++++++++++++++++
280.full | 70 ++++++++++++++
280.out | 1 +
group | 1 +
src/Makefile | 3 +-
src/seek_copy_test.c | 252 ++++++++++++++++++++++++++++++++++++++++++++++++++
6 files changed, 440 insertions(+), 1 deletions(-)
create mode 100755 280
create mode 100644 280.full
create mode 100644 280.out
create mode 100644 src/seek_copy_test.c

diff --git a/280 b/280
new file mode 100755
index 0000000..0cbe5fe
--- /dev/null
+++ b/280
@@ -0,0 +1,114 @@
+#! /bin/bash
+# FS QA Test No. 280
+#
+# SEEK_DATA/SEEK_HOLE copy tests.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2011 Oracle Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+#-----------------------------------------------------------------------
+#
+# creator
+owner=jeff.liu@oracle.com
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+
+src=$TEST_DIR/seek_copy_testfile
+dest=$TEST_DIR/seek_copy_testfile.dest
+
+[ -x $here/src/seek_copy_test ] || _notrun "seek_copy_test not built"
+
+_cleanup()
+{
+ rm -f $src $dest
+}
+
+# seek_copy_test_01: tests file with holes and written data extents.
+# verify results:
+# 1. file size is identical.
+# 2. perform cmp(1) to compare SRC and DEST file byte by byte.
+test01()
+{
+ rm -f $src $dest
+
+ write_cmd="-c \"truncate 100m\""
+ for i in $(seq 0 5 100); do
+ offset=$(($i * $((1 << 20))))
+ write_cmd="$write_cmd -c \"pwrite $offset 1m\""
+ done
+
+ echo "*** test01() create sparse file ***" >>$seq.full
+ eval ${XFS_IO_PROG} -F -f "${write_cmd}" $src >>$seq.full 2>&1 ||
+ _fail "create sparse file failed!"
+ echo "*** test01() create sparse file done ***" >>$seq.full
+ echo >>$seq.full
+
+ $here/src/seek_copy_test $src $dest
+
+ test $(stat --printf "%s" $src) = $(stat --printf "%s" $dest) ||
+ _fail "TEST01: file size check failed"
+
+ cmp $src $dest || _fail "TEST01: file bytes check failed"
+}
+
+# seek_copy_test_02 - tests file with holes, written and unwritten extents.
+# verify results:
+# 1. file size is identical.
+# 2. perform cmp(1) to compare SRC and DEST file byte by byte.
+test02()
+{
+ rm -rf $src $dest
+
+ write_cmd="-c \"truncate 200m\""
+ for i in $(seq 0 10 100); do
+ offset=$(($((6 << 20)) + $i * $((1 << 20))))
+ write_cmd="$write_cmd -c \"falloc $offset 3m\" -c \"pwrite $offset 1m\""
+ done
+
+ echo "*** test02() create sparse file ***" >>$seq.full
+ eval ${XFS_IO_PROG} -F -f "${write_cmd}" $src >>$seq.full 2>&1 ||
+ _fail "create sparse file failed!"
+ echo "*** test02() create sparse file done ***" >>$seq.full
+ echo >>$seq.full
+
+ $here/src/seek_copy_test $src $dest
+
+ test $(stat --printf "%s" $src) = $(stat --printf "%s" $dest) ||
+ _fail "TEST02: file size check failed"
+
+ cmp $src $dest || _fail "TEST02: file bytes check failed"
+}
+
+rm -f $seq.full
+
+test01
+test02
+
+status=0
+exit
diff --git a/280.full b/280.full
new file mode 100644
index 0000000..a3aa779
--- /dev/null
+++ b/280.full
@@ -0,0 +1,70 @@
+*** test01() create sparse file ***
+wrote 1048576/1048576 bytes at offset 0
+1 MiB, 256 ops; 0.0000 sec (22.298 MiB/sec and 5708.1698 ops/sec)
+wrote 1048576/1048576 bytes at offset 5242880
+1 MiB, 256 ops; 0.0000 sec (25.217 MiB/sec and 6455.5175 ops/sec)
+wrote 1048576/1048576 bytes at offset 10485760
+1 MiB, 256 ops; 0.0000 sec (26.036 MiB/sec and 6665.2781 ops/sec)
+wrote 1048576/1048576 bytes at offset 15728640
+1 MiB, 256 ops; 0.0000 sec (26.073 MiB/sec and 6674.6624 ops/sec)
+wrote 1048576/1048576 bytes at offset 20971520
+1 MiB, 256 ops; 0.0000 sec (25.654 MiB/sec and 6567.4705 ops/sec)
+wrote 1048576/1048576 bytes at offset 26214400
+1 MiB, 256 ops; 0.0000 sec (26.350 MiB/sec and 6745.5403 ops/sec)
+wrote 1048576/1048576 bytes at offset 31457280
+1 MiB, 256 ops; 0.0000 sec (25.826 MiB/sec and 6611.3995 ops/sec)
+wrote 1048576/1048576 bytes at offset 36700160
+1 MiB, 256 ops; 0.0000 sec (23.480 MiB/sec and 6010.8007 ops/sec)
+wrote 1048576/1048576 bytes at offset 41943040
+1 MiB, 256 ops; 0.0000 sec (26.208 MiB/sec and 6709.2987 ops/sec)
+wrote 1048576/1048576 bytes at offset 47185920
+1 MiB, 256 ops; 0.0000 sec (25.471 MiB/sec and 6520.6317 ops/sec)
+wrote 1048576/1048576 bytes at offset 52428800
+1 MiB, 256 ops; 0.0000 sec (26.266 MiB/sec and 6724.1017 ops/sec)
+wrote 1048576/1048576 bytes at offset 57671680
+1 MiB, 256 ops; 0.0000 sec (25.765 MiB/sec and 6595.7282 ops/sec)
+wrote 1048576/1048576 bytes at offset 62914560
+1 MiB, 256 ops; 0.0000 sec (25.364 MiB/sec and 6493.1771 ops/sec)
+wrote 1048576/1048576 bytes at offset 68157440
+1 MiB, 256 ops; 0.0000 sec (25.169 MiB/sec and 6443.1692 ops/sec)
+wrote 1048576/1048576 bytes at offset 73400320
+1 MiB, 256 ops; 0.0000 sec (25.815 MiB/sec and 6608.6687 ops/sec)
+wrote 1048576/1048576 bytes at offset 78643200
+1 MiB, 256 ops; 0.0000 sec (25.353 MiB/sec and 6490.3785 ops/sec)
+wrote 1048576/1048576 bytes at offset 83886080
+1 MiB, 256 ops; 0.0000 sec (24.223 MiB/sec and 6201.0997 ops/sec)
+wrote 1048576/1048576 bytes at offset 89128960
+1 MiB, 256 ops; 0.0000 sec (26.048 MiB/sec and 6668.2295 ops/sec)
+wrote 1048576/1048576 bytes at offset 94371840
+1 MiB, 256 ops; 0.0000 sec (26.072 MiB/sec and 6674.3143 ops/sec)
+wrote 1048576/1048576 bytes at offset 99614720
+1 MiB, 256 ops; 0.0000 sec (25.773 MiB/sec and 6597.7681 ops/sec)
+wrote 1048576/1048576 bytes at offset 104857600
+1 MiB, 256 ops; 0.0000 sec (13.849 MiB/sec and 3545.4117 ops/sec)
+*** test01() create sparse file done ***
+
+*** test02() create sparse file ***
+wrote 1048576/1048576 bytes at offset 6291456
+1 MiB, 256 ops; 0.0000 sec (27.116 MiB/sec and 6941.8081 ops/sec)
+wrote 1048576/1048576 bytes at offset 16777216
+1 MiB, 256 ops; 0.0000 sec (26.946 MiB/sec and 6898.2242 ops/sec)
+wrote 1048576/1048576 bytes at offset 27262976
+1 MiB, 256 ops; 0.0000 sec (23.951 MiB/sec and 6131.4428 ops/sec)
+wrote 1048576/1048576 bytes at offset 37748736
+1 MiB, 256 ops; 0.0000 sec (26.213 MiB/sec and 6710.5298 ops/sec)
+wrote 1048576/1048576 bytes at offset 48234496
+1 MiB, 256 ops; 0.0000 sec (25.801 MiB/sec and 6605.0880 ops/sec)
+wrote 1048576/1048576 bytes at offset 58720256
+1 MiB, 256 ops; 0.0000 sec (26.990 MiB/sec and 6909.3952 ops/sec)
+wrote 1048576/1048576 bytes at offset 69206016
+1 MiB, 256 ops; 0.0000 sec (26.738 MiB/sec and 6844.9198 ops/sec)
+wrote 1048576/1048576 bytes at offset 79691776
+1 MiB, 256 ops; 0.0000 sec (26.389 MiB/sec and 6755.5086 ops/sec)
+wrote 1048576/1048576 bytes at offset 90177536
+1 MiB, 256 ops; 0.0000 sec (25.212 MiB/sec and 6454.2154 ops/sec)
+wrote 1048576/1048576 bytes at offset 100663296
+1 MiB, 256 ops; 0.0000 sec (27.028 MiB/sec and 6919.1059 ops/sec)
+wrote 1048576/1048576 bytes at offset 111149056
+1 MiB, 256 ops; 0.0000 sec (20.882 MiB/sec and 5345.8069 ops/sec)
+*** test02() create sparse file done ***
+
diff --git a/280.out b/280.out
new file mode 100644
index 0000000..fb29270
--- /dev/null
+++ b/280.out
@@ -0,0 +1 @@
+QA output created by 280
diff --git a/group b/group
index 02c6743..5d197ee 100644
--- a/group
+++ b/group
@@ -390,3 +390,4 @@ deprecated
274 auto rw
275 auto rw
279 auto rw
+280 other
diff --git a/src/Makefile b/src/Makefile
index 1c6e717..d269e91 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -17,7 +17,8 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
locktest unwritten_mmap bulkstat_unlink_test t_stripealign \
bulkstat_unlink_test_modified t_dir_offset t_futimens t_immutable \
- stale_handle pwrite_mmap_blocked fstrim t_dir_offset2 seek_sanity_test
+ stale_handle pwrite_mmap_blocked fstrim t_dir_offset2 seek_sanity_test \
+ seek_copy_test

SUBDIRS =

diff --git a/src/seek_copy_test.c b/src/seek_copy_test.c
new file mode 100644
index 0000000..6536194
--- /dev/null
+++ b/src/seek_copy_test.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2011 Oracle. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+#define _XOPEN_SOURCE 500
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <ctype.h>
+#include <errno.h>
+#include <limits.h>
+
+#ifndef SEEK_DATA
+#define SEEK_DATA 3
+#define SEEK_HOLE 4
+#endif
+
+#define BUF_SIZE 4096
+#ifndef MIN
+#define MIN(a,b) ((a)<(b)?(a):(b))
+#endif
+
+static void
+error(const char *fmt, ...)
+{
+ char buf[256];
+ va_list args;
+ va_start(args, fmt);
+ vsprintf(buf, fmt, args);
+ va_end(args);
+
+ fprintf(stderr, "ERROR: [%s:%d] %s:%s\n", __func__, __LINE__,
+ buf, strerror(errno));
+}
+
+static size_t
+full_write(int fd, const void *buf, size_t count)
+{
+ size_t total = 0;
+ const char *ptr = (const char *) buf;
+
+ while (count > 0) {
+ ssize_t n = write(fd, ptr, count);
+ if (n < 0) {
+ if (errno == EINTR)
+ continue;
+ error("failed as %s", strerror(errno));
+ break;
+ }
+
+ if (n == 0) {
+ error("%zu bytes transferred. Aborting.",
+ total);
+ break;
+ }
+
+ total += n;
+ ptr += n;
+ count -= n;
+ }
+
+ return total;
+}
+
+/*
+ * Copy a data extent from source file to dest file.
+ * @data_off: data offset
+ * @hole_off: hole offset
+ * The length of this extent is (hole_off - data_off).
+ */
+static int
+do_extent_copy(int src_fd, int dest_fd, off_t data_off, off_t hole_off)
+{
+ uint64_t len = (uint64_t)(hole_off - data_off);
+ char buf[BUF_SIZE];
+ int ret;
+
+ /* Seek to data_off for data reading */
+ ret = lseek(src_fd, data_off, SEEK_SET);
+ if (ret < 0) {
+ error("seek source file to %llu failed as %s",
+ (uint64_t)data_off, strerror(errno));
+ return ret;
+ }
+
+ /* Seek to data_off for data writing, make holes as well */
+ ret = lseek(dest_fd, data_off, SEEK_SET);
+ if (ret < 0) {
+ error("seek dest file to %llu failed as %s",
+ (uint64_t)data_off, strerror(errno));
+ return ret;
+ }
+
+ while (len > 0) {
+ memset(buf, 0, sizeof(buf));
+ ssize_t nr_read = read(src_fd, buf, BUF_SIZE);
+ if (nr_read < 0) {
+ if (errno == EINTR)
+ continue;
+ error("read source file extent failed as %s",
+ strerror(errno));
+ ret = -1;
+ break;
+ }
+
+ if (nr_read == 0) {
+ error("reached EOF");
+ break;
+ }
+
+ if (full_write(dest_fd, buf, nr_read) != nr_read) {
+ error("write data to dest file failed as %s",
+ strerror(errno));
+ ret = -1;
+ break;
+ }
+
+ len -= nr_read;
+ }
+
+ return ret;
+}
+
+/*
+ * If lseek(2) failed and the errno is set to ENXIO, for
+ * SEEK_DATA there are no more data regions past the supplied
+ * offset. For SEEK_HOLE, there are no more holes past the
+ * supplied offset. Set scan->hit_final_extent to true for
+ * either case.
+ */
+static int
+copy_extents(int src_fd, int dest_fd, off_t src_total_size)
+{
+ int ret = 0;
+ unsigned int i = 0;
+ off_t seek_start = 0;
+ off_t dest_pos = 0;
+ off_t data_pos, hole_pos;
+
+ do {
+ data_pos = lseek(src_fd, seek_start, SEEK_DATA);
+ if (data_pos < 0) {
+ if (errno == ENXIO)
+ ret = 0;
+ else {
+ error("SEEK_DATA failed due to %s",
+ strerror(errno));
+ ret = -1;
+ }
+ break;
+ }
+
+ hole_pos = lseek(src_fd, data_pos, SEEK_HOLE);
+ if (hole_pos < 0) {
+ if (errno == ENXIO)
+ ret = 0;
+ else {
+ error("SEEK_HOLE failed due to %s\n",
+ strerror(errno));
+ ret = -1;
+ }
+ break;
+ }
+
+ /* do extent copy */
+ ret = do_extent_copy(src_fd, dest_fd, data_pos, hole_pos);
+ if (ret < 0) {
+ error("copy extent failed");
+ break;
+ }
+
+ dest_pos += (hole_pos - data_pos);
+ ++i;
+ seek_start = hole_pos;
+ } while (seek_start < src_total_size);
+
+ if (dest_pos < src_total_size) {
+ ret = ftruncate(dest_fd, src_total_size);
+ if (ret < 0) {
+ error("truncate dest file to %lld bytes failed as %s",
+ (long long)src_total_size, strerror(errno));
+ }
+ }
+
+ return ret;
+}
+
+int
+main(int argc, char **argv)
+{
+ int ret = 0;
+ int src_fd;
+ int dest_fd;
+ struct stat st;
+ size_t src_total_size;
+
+ if (argc != 3) {
+ fprintf(stdout, "Usage: %s source dest\n", argv[0]);
+ return 1;
+ }
+
+ src_fd = open(argv[1], O_RDONLY, 0644);
+ if (src_fd < 0) {
+ error("create %s failed", argv[1]);
+ return -1;
+ }
+
+ dest_fd = open(argv[2], O_RDWR|O_CREAT|O_EXCL, 0644);
+ if (dest_fd < 0) {
+ error("create %s failed", argv[2]);
+ ret = -errno;
+ goto close_src_fd;
+ }
+
+ ret = fstat(src_fd, &st);
+ if (ret < 0) {
+ error("get file %s staticis failed", argv[1]);
+ ret = -errno;
+ goto close_dest_fd;
+ }
+
+ src_total_size = st.st_size;
+ ret = copy_extents(src_fd, dest_fd, src_total_size);
+ if (ret < 0)
+ error("extents copy failed");
+
+close_dest_fd:
+ close(dest_fd);
+close_src_fd:
+ close(src_fd);
+
+ return ret;
+}
--
1.7.9

_______________________________________________
xfs mailing list
xfs@oss.sgi.com