From: Stan Hoeppner <stan@hardwarefreak.com>
To: xfs@oss.sgi.com
Subject: Re: XFS: Abysmal write performance because of excessive seeking (allocation groups to blame?)
Date: Sat, 14 Apr 2012 02:32:24 -0500 [thread overview]
Message-ID: <4F892808.2040003@hardwarefreak.com> (raw)
In-Reply-To: <CAAxjCEw-WZ9AtEJTZ6eS9+mjm+yh=e_19aJqxUN-ABRp8r3ZyQ@mail.gmail.com>
On 4/13/2012 2:36 PM, Stefan Ring wrote:
>> Let's rerun it with files cached (the machine has 16 GB RAM, so
>> every single file must be cached):
>>
>> # time tar xf test.tar
>>
>> real 0m50.842s
>> user 0m0.809s
>> sys 0m13.767s
>
> That’s about the same time I’m getting on a fresh (non-fragmented)
> file system with the RAID 6 volume.
>
> Interestingly, the P400’s successor, the P410 does recognize a setting
> that the P400 lacks, which is called elevatorsort. It sounds like this
> could make all the difference. Unfortunately, the P400 doesn’t have
> it. I don’t have a P410 with more than 2 drives to test this, but some
> effect should definitely be measurable.
>
> Since this finding has piqued my interest again, I’m willing to invest
> a little more time, but I’m completely occupied for the next few days,
> so it will have to wait a while.
What configuration are you running right now Stefan? You said you went
back to XFS due to the EXT4 lockups, but I can't recall what RAID config
you put underneath it this time.
--
Stan
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2012-04-14 7:32 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-05 18:10 XFS: Abysmal write performance because of excessive seeking (allocation groups to blame?) Stefan Ring
2012-04-05 19:56 ` Peter Grandi
2012-04-05 22:41 ` Peter Grandi
2012-04-06 14:36 ` Peter Grandi
2012-04-06 15:37 ` Stefan Ring
2012-04-07 13:33 ` Peter Grandi
2012-04-05 21:37 ` Christoph Hellwig
2012-04-06 1:09 ` Peter Grandi
2012-04-06 8:25 ` Stefan Ring
2012-04-07 18:57 ` Martin Steigerwald
2012-04-10 14:02 ` Stefan Ring
2012-04-10 14:32 ` Joe Landman
2012-04-10 15:56 ` Stefan Ring
2012-04-10 18:13 ` Martin Steigerwald
2012-04-10 20:44 ` Stan Hoeppner
2012-04-10 21:00 ` Stefan Ring
2012-04-05 22:32 ` Roger Willcocks
2012-04-06 7:11 ` Stefan Ring
2012-04-06 8:24 ` Stefan Ring
2012-04-05 23:07 ` Peter Grandi
2012-04-06 0:13 ` Peter Grandi
2012-04-06 7:27 ` Stefan Ring
2012-04-06 23:28 ` Stan Hoeppner
2012-04-07 7:27 ` Stefan Ring
2012-04-07 8:53 ` Emmanuel Florac
2012-04-07 14:57 ` Stan Hoeppner
2012-04-09 11:02 ` Stefan Ring
2012-04-09 12:48 ` Emmanuel Florac
2012-04-09 12:53 ` Stefan Ring
2012-04-09 13:03 ` Emmanuel Florac
2012-04-09 23:38 ` Stan Hoeppner
2012-04-10 6:11 ` Stefan Ring
2012-04-10 20:29 ` Stan Hoeppner
2012-04-10 20:43 ` Stefan Ring
2012-04-10 21:29 ` Stan Hoeppner
2012-04-09 0:19 ` Dave Chinner
2012-04-09 11:39 ` Emmanuel Florac
2012-04-09 21:47 ` Dave Chinner
2012-04-07 8:49 ` Emmanuel Florac
2012-04-08 20:33 ` Stan Hoeppner
2012-04-08 21:45 ` Emmanuel Florac
2012-04-09 5:27 ` Stan Hoeppner
2012-04-09 12:45 ` Emmanuel Florac
2012-04-13 19:36 ` Stefan Ring
2012-04-14 7:32 ` Stan Hoeppner [this message]
2012-04-14 11:30 ` Stefan Ring
2012-04-09 14:21 ` Geoffrey Wehrman
2012-04-10 19:30 ` Stan Hoeppner
2012-04-11 22:19 ` Geoffrey Wehrman
2012-04-07 16:50 ` Peter Grandi
2012-04-07 17:10 ` Joe Landman
2012-04-08 21:42 ` Stan Hoeppner
2012-04-09 5:13 ` Stan Hoeppner
2012-04-09 11:52 ` Stefan Ring
2012-04-10 7:34 ` Stan Hoeppner
2012-04-10 13:59 ` Stefan Ring
2012-04-09 9:23 ` Stefan Ring
2012-04-09 23:06 ` Stan Hoeppner
2012-04-06 0:53 ` Peter Grandi
2012-04-06 7:32 ` Stefan Ring
2012-04-06 5:53 ` Stefan Ring
2012-04-06 15:35 ` Peter Grandi
2012-04-10 14:05 ` Stefan Ring
2012-04-07 19:11 ` Peter Grandi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F892808.2040003@hardwarefreak.com \
--to=stan@hardwarefreak.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox