From: Jeff Liu <jeff.liu@oracle.com>
To: xfs@oss.sgi.com
Cc: Christoph Hellwig <hch@infradead.org>, Ben Myers <bpm@sgi.com>,
Mark Tinguely <tinguely@sgi.com>,
Chris Mason <chris.mason@oracle.com>
Subject: [PATCH] Introduce SEEK_DATA/SEEK_HOLE support v9
Date: Thu, 10 May 2012 21:29:17 +0800 [thread overview]
Message-ID: <4FABC2AD.2030609@oracle.com> (raw)
Hello,
This is the revised patch according to Mark's comments.
Is it possible to get it to accept if there are no other issues,
so that I can continue to work on the unwritten part based on that.
Thanks,
-Jeff
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
---
fs/xfs/xfs_file.c | 143 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 142 insertions(+), 1 deletions(-)
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index 54a67dd..b6ddc6f 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -1007,8 +1007,149 @@ xfs_vm_page_mkwrite(
return block_page_mkwrite(vma, vmf, xfs_get_blocks);
}
+STATIC loff_t
+xfs_seek_data(
+ struct file *file,
+ loff_t start,
+ u32 type)
+{
+ struct inode *inode = file->f_mapping->host;
+ struct xfs_inode *ip = XFS_I(inode);
+ struct xfs_mount *mp = ip->i_mount;
+ struct xfs_bmbt_irec map[2];
+ int nmap = 2;
+ loff_t uninitialized_var(offset);
+ xfs_fsize_t isize;
+ xfs_fileoff_t fsbno;
+ xfs_filblks_t end;
+ uint lock;
+ int error;
+
+ lock = xfs_ilock_map_shared(ip);
+
+ isize = i_size_read(inode);
+ if (start >= isize) {
+ error = ENXIO;
+ goto out_unlock;
+ }
+
+ fsbno = XFS_B_TO_FSBT(mp, start);
+
+ /*
+ * Try to read extents from the first block indicated
+ * by fsbno to the end block of the file.
+ */
+ end = XFS_B_TO_FSB(mp, isize);
+
+ error = xfs_bmapi_read(ip, fsbno, end - fsbno, map, &nmap,
+ XFS_BMAPI_ENTIRE);
+ if (error)
+ goto out_unlock;
+
+ /*
+ * Treat unwritten extent as data extent since it might
+ * contains dirty data in page cache.
+ */
+ if (map[0].br_startblock != HOLESTARTBLOCK) {
+ offset = max_t(loff_t, start,
+ XFS_FSB_TO_B(mp, map[0].br_startoff));
+ } else {
+ if (nmap == 1) {
+ error = ENXIO;
+ goto out_unlock;
+ }
+
+ offset = max_t(loff_t, start,
+ XFS_FSB_TO_B(mp, map[1].br_startoff));
+ }
+
+ if (offset != file->f_pos)
+ file->f_pos = offset;
+
+out_unlock:
+ xfs_iunlock_map_shared(ip, lock);
+
+ if (error)
+ return -error;
+ return offset;
+}
+
+STATIC loff_t
+xfs_seek_hole(
+ struct file *file,
+ loff_t start,
+ u32 type)
+{
+ struct inode *inode = file->f_mapping->host;
+ struct xfs_inode *ip = XFS_I(inode);
+ struct xfs_mount *mp = ip->i_mount;
+ loff_t uninitialized_var(offset);
+ loff_t holeoff;
+ xfs_fsize_t isize;
+ xfs_fileoff_t fsbno;
+ uint lock;
+ int error;
+
+ if (XFS_FORCED_SHUTDOWN(mp))
+ return -XFS_ERROR(EIO);
+
+ lock = xfs_ilock_map_shared(ip);
+
+ isize = i_size_read(inode);
+ if (start >= isize) {
+ error = ENXIO;
+ goto out_unlock;
+ }
+
+ fsbno = XFS_B_TO_FSBT(mp, start);
+ error = xfs_bmap_first_unused(NULL, ip, 1, &fsbno, XFS_DATA_FORK);
+ if (error)
+ goto out_unlock;
+
+ holeoff = XFS_FSB_TO_B(mp, fsbno);
+ if (holeoff <= start)
+ offset = start;
+ else {
+ /*
+ * xfs_bmap_first_unused() could return a value bigger than
+ * isize if there are no more holes past the supplied offset.
+ */
+ offset = min_t(loff_t, holeoff, isize);
+ }
+
+ if (offset != file->f_pos)
+ file->f_pos = offset;
+
+out_unlock:
+ xfs_iunlock_map_shared(ip, lock);
+
+ if (error)
+ return -error;
+ return offset;
+}
+
+STATIC loff_t
+xfs_file_llseek(
+ struct file *file,
+ loff_t offset,
+ int origin)
+{
+ switch (origin) {
+ case SEEK_END:
+ case SEEK_CUR:
+ case SEEK_SET:
+ return generic_file_llseek(file, offset, origin);
+ case SEEK_DATA:
+ return xfs_seek_data(file, offset, origin);
+ case SEEK_HOLE:
+ return xfs_seek_hole(file, offset, origin);
+ default:
+ return -EINVAL;
+ }
+}
+
const struct file_operations xfs_file_operations = {
- .llseek = generic_file_llseek,
+ .llseek = xfs_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = xfs_file_aio_read,
--
1.7.9
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next reply other threads:[~2012-05-10 13:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-10 13:29 Jeff Liu [this message]
2012-05-10 19:51 ` [PATCH] Introduce SEEK_DATA/SEEK_HOLE support v9 Mark Tinguely
2012-05-10 20:08 ` Ben Myers
2012-05-10 20:07 ` Mark Tinguely
2012-05-10 20:28 ` Mark Tinguely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FABC2AD.2030609@oracle.com \
--to=jeff.liu@oracle.com \
--cc=bpm@sgi.com \
--cc=chris.mason@oracle.com \
--cc=hch@infradead.org \
--cc=tinguely@sgi.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox