From: Andy Bennett <andyjpb@ashurst.eu.org>
To: xfs@oss.sgi.com
Subject: XFS Recovery Behaviour
Date: Thu, 02 Aug 2012 01:12:41 +0100 [thread overview]
Message-ID: <5019C5F9.1080302@ashurst.eu.org> (raw)
Hi,
This post isn't going to be too detailed as I ended up in a recovery
situation and was focused on checking the integrity of my files rather
than recording every step as I went.
I thought it was worth reporting as the file system seemed to recover in
an odd way.
I am not expecting any assistance as I was able to recover all my data.
I am using an XFS partition for storing my digital camera photos. I have
2 cards, card-1 and card-2. On any day when I injest the contents of the
cards I make directories import-YYYY-MM-DD/card-{1,2}/
I have a script that creates the directories and performs the injesting.
I had previously (2012/07/04) injested import-2012-07-04/card-1/
On 2012-07-28 I went into import-2012-07-04/ and created a thumbnail
gallery with my thumbnail script. This involved creating a directory
import-2012-07-05/gal-card-1 and populating it with files. The directory
entry for import-2012-07-04 was now dirty.
Simultaneously, I began a fresh injest session into
import-2012-07-28/card-2/.
Whilst these two jobs were running I suffered a hard power failure as I
unplugged the thing (it's a laptop) not realising that my battery was
flat. :-(
When I rebooted I noticed that import-2012-07-04 was showing up somewhat
thusly in 'ls -la':
-----
?????????? ? ? ? ?? ??? ? ??:?? import-2012-07-04
-----
I could not 'cd' into it nor could I 'cat' it.
I thought the directory was lost and resolved to restore it from backups
when I returned home.
I didn't pay much attention at the time to the contents of
import-2012-07-28/
Over the course of the day I injested a few more things into
import-2012-07-28/
When I returned home I looked into restoring the backups. To my
surprise, import-2012-07-04/ was showing up as a valid directory again.
Even more surprisingly it contained a (somewhat corrupt) card-2/
directory that should have been in import-2012-07-28/. It did not
contain the card-1/ directory.
There is anecdotal evidence that import-2012-07-28/card-2/ was no longer
present.
I recovered import-2012-07-04/card-1/ from an xfsdump.
I recovered import-2012-07-28/card-2/ because I hadn't gotten around to
verifying the injest so didn't format the card before I reused it. It
wasn't full so I added more shots to it and injested it again later in
the day.
Today, I deleted import-2012-07-04/card-2/ after much to-ing and
fro-ing. It was a subset of import-2012-07-28/card-2b/ (an injest of the
same card later in the day, albeit with extra files) and some of the
overlapping files were corrupt or empty in 2012-07-04/card-2/. (My
injest script records checksums and I used a visual verification of the
images I was concerned about.)
The corrupt & missing files were the ones towards the end of the injest:
they had high numbered filenames, so would have been the ones in flight
at the time of the power failure.
I'm running XFS on Debian Testing (Wheezy)
-----
$ dpkg -l |grep xfs | grep -v x11
ii xfsdump 3.0.6 Administrative utilities for the XFS filesystem
ii xfslibs-dev 3.1.7+b1 XFS filesystem-specific static libraries and
headers
ii xfsprogs 3.1.7+b1 Utilities for managing the XFS filesystem
-----
-----
$ uname -a
Linux lago 3.2.0-3-amd64 #1 SMP Thu Jun 28 09:07:26 UTC 2012 x86_64
GNU/Linux
-----
I have "defaults" under "options" in /etc/fstab.
I'm using Debian defaults on a Lenovo Thinkpad X200 laptop.
I didn't expect to see the import-2012-07-04/ directory again and I
certainly didn't expect to see it populated with the card-2/ subdirectory.
Regards,
@ndy
--
andyjpb@ashurst.eu.org
http://www.ashurst.eu.org/
0x7EBA75FF
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next reply other threads:[~2012-08-02 0:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-02 0:12 Andy Bennett [this message]
2012-08-02 0:23 ` XFS Recovery Behaviour Andy Bennett
2012-08-02 17:42 ` Geoffrey Wehrman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5019C5F9.1080302@ashurst.eu.org \
--to=andyjpb@ashurst.eu.org \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox