From: Eric Sandeen <sandeen@sandeen.net>
To: sat <takeuchi_satoru@jp.fujitsu.com>
Cc: Rich Johnston <rjohnston@sgi.com>, xfs mailing list <xfs@oss.sgi.com>
Subject: Re: [PATCH] xfstests: fix to build src/realpath and the correct the existence of target devices
Date: Mon, 19 Nov 2012 22:06:02 -0600 [thread overview]
Message-ID: <50AB01AA.5060706@sandeen.net> (raw)
In-Reply-To: <50A9A6FE.1080106@jp.fujitsu.com>
On 11/18/12 9:26 PM, sat wrote:
> Hi Rich, Eric
>
> (2012/10/27 1:46), Rich Johnston wrote:
>> On 06/08/2010 03:03 PM, Eric Sandeen wrote:
>>> If you try running xfstests on lvm volumes which are symlinks,
>>> it'll fail to run several tests because our _require_scratch
>>> framework ultimately uses lstat not stat, and does not think
>>> the lvm device (which is usually a symlink to a dm-X device)
>>> is a block device. Sigh.
>>>
>>> Last try at this - just resolve any symlinked devicenames
>>> into their realpath(3) in common.config.
>>>
>>> This actually seems to work.
>>>
>>> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
>>>
>>> ---
>>>
>>>
>>> diff --git a/common.config b/common.config
>>> index 926846b..e5b2483 100644
>>> --- a/common.config
>>> +++ b/common.config
>>
>> Looks good
>>
>> Reviewed-by: Rich Johnston <rjohnston@sgi.com>
>>
>> Eric,
>>
>> This patch has been committed to git://oss.sgi.com/xfs/cmds/xfstests, master branch, commit ID d5ea873f.
>
> From: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
>
> Commit d5ea873f is not the same as the the following original Eric's patch.
>
> http://oss.sgi.com/archives/xfs/2010-06/msg00080.html
>
> It does not modify src/Makefile and realpath is never compiled.
Yep, whoops. Merge error . . .?
> In addition, `[ -L $TEST_DEV ]' and `[ -L $SCRATCH_DEV ]' always returns 0
> if $TEST_DEV or $SCRATCH_DEV are not defined.
Well, I don't think ./check will get very far with an undefined TEST_DEV or
SCRATCH_DEV, but better this way, thanks.
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
> Cc: Eric Sandeen <sandeen@sandeen.net>
> Cc: Rich Johnston <rjohnston@sgi.com>
> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
>
> ---
> common.config | 4 ++--
> src/Makefile | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/common.config b/common.config
> index 585b150..3240ee9 100644
> --- a/common.config
> +++ b/common.config
> @@ -221,11 +221,11 @@ else
> fi
>
> # Scripts just don't deal well with symlinked devices
> -if [ -L $TEST_DEV ]; then
> +if [ -L "$TEST_DEV" ]; then
> TEST_DEV=`src/realpath $TEST_DEV`
> fi
>
> -if [ -L $SCRATCH_DEV ]; then
> +if [ -L "$SCRATCH_DEV" ]; then
> SCRATCH_DEV=`src/realpath $SCRATCH_DEV`
> fi
>
> diff --git a/src/Makefile b/src/Makefile
> index f7362a2..9f7281d 100644
> --- a/src/Makefile
> +++ b/src/Makefile
> @@ -11,7 +11,7 @@ TARGETS = dirstress fill fill2 getpagesize holes lstat64 \
> devzero feature alloc fault fstest t_access_root \
> godown resvtest writemod makeextents itrash rename \
> multi_open_unlink dmiperf unwritten_sync genhashnames t_holes \
> - t_mmap_writev
> + t_mmap_writev realpath
>
> LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
> preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
>
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2012-11-20 4:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-08 20:03 [PATCH] xfstests: resolve symlinked devices to real paths Eric Sandeen
2012-10-26 16:46 ` Rich Johnston
2012-11-19 3:26 ` [PATCH] xfstests: fix to build src/realpath and the correct the existence of target devices sat
2012-11-19 3:55 ` Wanlong Gao
2012-11-20 4:06 ` Eric Sandeen [this message]
2012-11-20 4:30 ` sat
2012-11-20 5:28 ` Eric Sandeen
2012-11-20 13:53 ` Rich Johnston
2012-11-20 14:05 ` Eric Sandeen
[not found] <20121121135123.092349449@sgi.com>
2012-11-21 13:51 ` rjohnston
2012-11-21 14:31 ` Rich Johnston
2012-11-23 12:37 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50AB01AA.5060706@sandeen.net \
--to=sandeen@sandeen.net \
--cc=rjohnston@sgi.com \
--cc=takeuchi_satoru@jp.fujitsu.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox