From: "Rémi Cailletaud" <remi.cailletaud@3sr-grenoble.fr>
To: xfs@oss.sgi.com
Subject: problem after growing
Date: Wed, 13 Feb 2013 18:04:11 +0100 [thread overview]
Message-ID: <511BC78B.6070205@3sr-grenoble.fr> (raw)
Hi,
I face a strange and scary issue. I just grow a xfs filesystem (44To),
and no way to mount it anymore :
XFS: device supports only 4096 byte sectors (not 512)
# xfs_check /dev/vg0/tomo-201111
ERROR: The filesystem has valuable metadata changes in a log which needs to
be replayed. Mount the filesystem to replay the log, and unmount it before
re-running xfs_check. If you are unable to mount the filesystem, then use
the xfs_repair -L option to destroy the log and attempt a repair.
Note that destroying the log may cause corruption -- please attempt a mount
of the filesystem before doing this.
# xfs_repair -L /dev/vg0/tomo-201111
xfs_repair: warning - cannot set blocksize 512 on block device
/dev/vg0/tomo-201111: Argument invalide
Phase 1 - find and verify superblock...
superblock read failed, offset 1099511623680, size 2048, ag 1, rval -1
fatal error -- Invalid argument
Conf is as follow :
LVM : 3pv - 1vg
the lv containing the xfs system is on several extents :
tomo-201111 vg0 -wi-ao 1 linear 15,34t /dev/sda:5276160-9298322
tomo-201111 vg0 -wi-ao 1 linear 18,66t /dev/sdb:0-4890732
tomo-201111 vg0 -wi-ao 1 linear 8,81t /dev/sdb:6987885-9298322
tomo-201111 vg0 -wi-ao 1 linear 1,19t /dev/sdc:2883584-3194585
before growing fs, I lvextend the vg, and a new extents on /dev/sdc was
used. I cant think it caused this issue... I saw there can be problem
with underlying device (an ARECA 1880). With xfs_db, I found this strange :
"logsectsize = 0"
# xfs_db -c "sb 0" -c "p" /dev/vg0/tomo-201111
magicnum = 0x58465342
blocksize = 4096
dblocks = 10468982745
rblocks = 0
rextents = 0
uuid = 09793bea-952b-44fa-be71-02f59e69b41b
logstart = 1342177284
rootino = 128
rbmino = 129
rsumino = 130
rextsize = 1
agblocks = 268435455
agcount = 39
rbmblocks = 0
logblocks = 521728
versionnum = 0xb4b4
sectsize = 512
inodesize = 256
inopblock = 16
fname = "\000\000\000\000\000\000\000\000\000\000\000\000"
blocklog = 12
sectlog = 9
inodelog = 8
inopblog = 4
agblklog = 28
rextslog = 0
inprogress = 0
imax_pct = 5
icount = 6233280
ifree = 26
fdblocks = 1218766953
frextents = 0
uquotino = 0
gquotino = 0
qflags = 0
flags = 0
shared_vn = 0
inoalignmt = 2
unit = 0
width = 0
dirblklog = 0
logsectlog = 0
logsectsize = 0
logsunit = 1
features2 = 0xa
bad_features2 = 0xa
Any idea ?
Cheers,
rémi
--
Rémi Cailletaud - IE CNRS
3SR - Laboratoire Sols, Solides, Structures - Risques
BP53, 38041 Grenoble CEDEX 0
FRANCE
remi.cailletaud@3sr-grenoble.fr
Tél: +33 (0)4 76 82 52 78
Fax: +33 (0)4 76 82 70 43
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next reply other threads:[~2013-02-13 17:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-13 17:04 Rémi Cailletaud [this message]
2013-02-13 17:20 ` problem after growing Eric Sandeen
2013-02-13 17:27 ` Rémi Cailletaud
2013-02-13 17:39 ` Eric Sandeen
2013-02-13 17:44 ` Rémi Cailletaud
2013-02-13 17:52 ` Eric Sandeen
2013-02-13 18:09 ` Rémi Cailletaud
2013-02-13 19:50 ` Eric Sandeen
2013-02-13 20:12 ` Eric Sandeen
2013-02-13 21:18 ` Rémi Cailletaud
2013-02-13 21:38 ` Eric Sandeen
2013-02-14 8:21 ` Rémi Cailletaud
2013-02-14 9:39 ` Rémi Cailletaud
[not found] ` <511CFC06.2030103@3sr-grenoble.fr>
[not found] ` <511CFCBD.504@sandeen.net>
2013-02-14 16:37 ` Rémi Cailletaud
2013-02-14 18:34 ` Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=511BC78B.6070205@3sr-grenoble.fr \
--to=remi.cailletaud@3sr-grenoble.fr \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox