From: Guillaume Anciaux <guillaume.anciaux@epfl.ch>
To: Dave Chinner <david@fromorbit.com>
Cc: linux-xfs@oss.sgi.com
Subject: Re: mount XFS partition fail after repair when uquota and gquota are used
Date: Tue, 19 Mar 2013 09:21:08 +0100 [thread overview]
Message-ID: <51481FF4.9060500@epfl.ch> (raw)
In-Reply-To: <20130318233353.GT6369@dastard>
[-- Attachment #1: Type: text/plain, Size: 4480 bytes --]
On 03/19/2013 12:33 AM, Dave Chinner wrote:
> On Mon, Mar 18, 2013 at 02:59:56AM -0700, anciaux wrote:
>> I have been struggling to repair a partition after a RAID disk set failure.
>>
>> Apparently the data is accessible with no problem since I can mount the
>> partition.
>>
>> The problem is ONLY when I use the uquota and gquota mount option (which I
>> was using freely before the disk failure).
>>
>> The syslog shows:
>>
>> Mar 18 09:35:50 storage kernel: [ 417.885430] XFS (sdb1): Internal error
>> xfs_iformat(1) at line 319 of file
> And the line before this in your log should tell you what inode was
> corrupt. Can you paste it?
>
> Cheers,
>
> Dave.
Some lines were missing. Here is the complete log:
Mar 18 09:35:50 storage kernel: [ 417.883817] XFS (sdb1): corrupt
dinode 3224608213, extent total = 1, nblocks = 0.
Mar 18 09:35:50 storage kernel: [ 417.883822] ffff880216304500: 49 4e
81 a4 01 02 00 01 00 00 03 f4 00 00 03 f5 IN..............
Mar 18 09:35:50 storage kernel: [ 417.883926] XFS (sdb1): Internal
error xfs_iformat(1) at line 319 of file
/build/buildd/linux-3.2.0/fs/xfs/xfs_inode.c. Caller 0xffffffffa0308502
Mar 18 09:35:50 storage kernel: [ 417.883928]
Mar 18 09:35:50 storage kernel: [ 417.884103] Pid: 2947, comm: mount
Tainted: P O 3.2.0-38-generic #61-Ubuntu
Mar 18 09:35:50 storage kernel: [ 417.884105] Call Trace:
Mar 18 09:35:50 storage kernel: [ 417.884137] [<ffffffffa02c26cf>]
xfs_error_report+0x3f/0x50 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884155] [<ffffffffa0308502>] ?
xfs_iread+0x172/0x1c0 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884166] [<ffffffffa02c273e>]
xfs_corruption_error+0x5e/0x90 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884183] [<ffffffffa030826c>]
xfs_iformat+0x42c/0x550 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884200] [<ffffffffa0308502>] ?
xfs_iread+0x172/0x1c0 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884217] [<ffffffffa0308502>]
xfs_iread+0x172/0x1c0 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884223] [<ffffffff81193612>] ?
inode_init_always+0x102/0x1c0
Mar 18 09:35:50 storage kernel: [ 417.884235] [<ffffffffa02c71e4>]
xfs_iget_cache_miss+0x64/0x230 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884247] [<ffffffffa02c74d9>]
xfs_iget+0x129/0x1b0 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884250] [<ffffffff81193e9a>] ?
evict+0x12a/0x1c0
Mar 18 09:35:50 storage kernel: [ 417.884269] [<ffffffffa0323c46>]
xfs_qm_dqusage_adjust+0x86/0x2a0 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884300] [<ffffffffa02bfda1>] ?
xfs_buf_rele+0x51/0x130 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884314] [<ffffffffa02ccf83>]
xfs_bulkstat+0x413/0x800 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884338] [<ffffffffa0323bc0>] ?
xfs_qm_quotacheck_dqadjust+0x190/0x190 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884358] [<ffffffffa02d66d5>] ?
kmem_free+0x35/0x40 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884382] [<ffffffffa03246b5>]
xfs_qm_quotacheck+0xe5/0x1c0 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884406] [<ffffffffa031de3c>] ?
xfs_qm_dqdestroy+0x1c/0x30 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884430] [<ffffffffa0324a94>]
xfs_qm_mount_quotas+0x124/0x1b0 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884452] [<ffffffffa0310990>]
xfs_mountfs+0x5f0/0x690 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884470] [<ffffffffa02ce322>] ?
xfs_mru_cache_create+0x162/0x190 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884490] [<ffffffffa02d053e>]
xfs_fs_fill_super+0x1de/0x290 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884499] [<ffffffff8117c366>]
mount_bdev+0x1c6/0x210
Mar 18 09:35:50 storage kernel: [ 417.884518] [<ffffffffa02d0360>] ?
xfs_parseargs+0xbc0/0xbc0 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884537] [<ffffffffa02ce665>]
xfs_fs_mount+0x15/0x20 [xfs]
Mar 18 09:35:50 storage kernel: [ 417.884547] [<ffffffff8117cef3>]
mount_fs+0x43/0x1b0
Mar 18 09:35:50 storage kernel: [ 417.884555] [<ffffffff8119783a>]
vfs_kern_mount+0x6a/0xc0
Mar 18 09:35:50 storage kernel: [ 417.884564] [<ffffffff81198d44>]
do_kern_mount+0x54/0x110
Mar 18 09:35:50 storage kernel: [ 417.884573] [<ffffffff8119a8a4>]
do_mount+0x1a4/0x260
Mar 18 09:35:50 storage kernel: [ 417.884581] [<ffffffff8119ad80>]
sys_mount+0x90/0xe0
Mar 18 09:35:50 storage kernel: [ 417.884591] [<ffffffff81665982>]
system_call_fastpath+0x16/0x1b
Mar 18 09:35:50 storage kernel: [ 417.884596] XFS (sdb1): Corruption
detected. Unmount and run xfs_repair
[-- Attachment #2: guillaume_anciaux.vcf --]
[-- Type: text/x-vcard, Size: 233 bytes --]
begin:vcard
fn:Guillaume Anciaux
n:Anciaux;Guillaume
org:EPFL/ENAC/IS/LSMS
adr:;;Station 18, GC A2 494;Lausanne;Vaud;1015;Switzerland
email;internet:guillaume.anciaux@epfl.ch
title:Ph.D
url:http://lsms.epfl.ch
version:2.1
end:vcard
[-- Attachment #3: Type: text/plain, Size: 121 bytes --]
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
prev parent reply other threads:[~2013-03-19 8:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-18 9:59 mount XFS partition fail after repair when uquota and gquota are used anciaux
2013-03-18 16:47 ` Ben Myers
2013-03-18 19:51 ` Guillaume Anciaux
2013-03-18 21:36 ` Ben Myers
[not found] ` <51478CAB.3020409@epfl.ch>
2013-03-19 14:15 ` Guillaume Anciaux
2013-03-18 21:47 ` Keith Keller
2013-03-18 23:33 ` Dave Chinner
2013-03-19 8:21 ` Guillaume Anciaux [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51481FF4.9060500@epfl.ch \
--to=guillaume.anciaux@epfl.ch \
--cc=david@fromorbit.com \
--cc=linux-xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox