[PATCH v3 1/2] xfs: Remove XFS_MOUNT_RETERR

[Jeff Liu <jeff.liu@oracle.com>]

From: Jie Liu <jeff.liu@oracle.com>

XFS_MOUNT_RETERR is going to be set at xfs_parseargs() if
mp->m_dalign is enabled, so any time we enter "if (mp->m_dalign)"
branch in xfs_update_alignment(), XFS_MOUNT_RETERR is set and so
we always be emitting a warning and returning an error.

Hence, we can remove it and get rid of a couple of redundant
check up against it at xfs_upate_alignment().

Thanks Dave Chinner for the suggestions of simplify the code
in xfs_parseargs().

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Mark Tinguely <tinguely@sgi.com>
---
 fs/xfs/xfs_mount.c |   37 +++++++++++--------------------------
 fs/xfs/xfs_mount.h |    2 --
 fs/xfs/xfs_super.c |   11 +++--------
 3 files changed, 14 insertions(+), 36 deletions(-)

diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 3806088..95bd4b5 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -872,42 +872,27 @@ xfs_update_alignment(xfs_mount_t *mp)
 		 */
 		if ((BBTOB(mp->m_dalign) & mp->m_blockmask) ||
 		    (BBTOB(mp->m_swidth) & mp->m_blockmask)) {
-			if (mp->m_flags & XFS_MOUNT_RETERR) {
-				xfs_warn(mp, "alignment check failed: "
-					 "(sunit/swidth vs. blocksize)");
-				return XFS_ERROR(EINVAL);
-			}
-			mp->m_dalign = mp->m_swidth = 0;
+			xfs_warn(mp,
+		"alignment check failed: sunit/swidth vs. blocksize(%d)",
+				sbp->sb_blocksize);
+			return XFS_ERROR(EINVAL);
 		} else {
 			/*
 			 * Convert the stripe unit and width to FSBs.
 			 */
 			mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign);
 			if (mp->m_dalign && (sbp->sb_agblocks % mp->m_dalign)) {
-				if (mp->m_flags & XFS_MOUNT_RETERR) {
-					xfs_warn(mp, "alignment check failed: "
-						 "(sunit/swidth vs. ag size)");
-					return XFS_ERROR(EINVAL);
-				}
 				xfs_warn(mp,
-		"stripe alignment turned off: sunit(%d)/swidth(%d) "
-		"incompatible with agsize(%d)",
-					mp->m_dalign, mp->m_swidth,
-					sbp->sb_agblocks);
-
-				mp->m_dalign = 0;
-				mp->m_swidth = 0;
+			"alignment check failed: sunit/swidth vs. agsize(%d)",
+					 sbp->sb_agblocks);
+				return XFS_ERROR(EINVAL);
 			} else if (mp->m_dalign) {
 				mp->m_swidth = XFS_BB_TO_FSBT(mp, mp->m_swidth);
 			} else {
-				if (mp->m_flags & XFS_MOUNT_RETERR) {
-					xfs_warn(mp, "alignment check failed: "
-						"sunit(%d) less than bsize(%d)",
-						mp->m_dalign,
-						mp->m_blockmask +1);
-					return XFS_ERROR(EINVAL);
-				}
-				mp->m_swidth = 0;
+				xfs_warn(mp,
+			"alignment check failed: sunit(%d) less than bsize(%d)",
+					 mp->m_dalign, sbp->sb_blocksize);
+				return XFS_ERROR(EINVAL);
 			}
 		}
 
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index b68e56b..ace092a7 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -228,8 +228,6 @@ typedef struct xfs_mount {
 						   operations, typically for
 						   disk errors in metadata */
 #define XFS_MOUNT_DISCARD	(1ULL << 5)	/* discard unused blocks */
-#define XFS_MOUNT_RETERR	(1ULL << 6)     /* return alignment errors to
-						   user */
 #define XFS_MOUNT_NOALIGN	(1ULL << 7)	/* turn off stripe alignment
 						   allocations */
 #define XFS_MOUNT_ATTR2		(1ULL << 8)	/* allow use of attr2 format */
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index ea341ce..7bf1389 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -439,20 +439,15 @@ xfs_parseargs(
 	}
 
 done:
-	if (!(mp->m_flags & XFS_MOUNT_NOALIGN)) {
+	if (dsunit && !(mp->m_flags & XFS_MOUNT_NOALIGN)) {
 		/*
 		 * At this point the superblock has not been read
 		 * in, therefore we do not know the block size.
 		 * Before the mount call ends we will convert
 		 * these to FSBs.
 		 */
-		if (dsunit) {
-			mp->m_dalign = dsunit;
-			mp->m_flags |= XFS_MOUNT_RETERR;
-		}
-
-		if (dswidth)
-			mp->m_swidth = dswidth;
+		mp->m_dalign = dsunit;
+		mp->m_swidth = dswidth;
 	}
 
 	if (mp->m_logbufs != -1 &&
-- 
1.7.9.5

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs