From: James Dingwall <james.dingwall@zynstra.com>
To: xfs@oss.sgi.com
Subject: Re: Cleancache support in XFS
Date: Mon, 13 May 2013 09:59:34 +0100 [thread overview]
Message-ID: <5190AB76.5050108@zynstra.com> (raw)
In-Reply-To: <51810CED.4080003@zynstra.com>
[-- Attachment #1: Type: text/plain, Size: 2058 bytes --]
James Dingwall wrote:
> --- xfs_super.c 2013-04-29 10:28:22.000000000 +0100
> +++ xfs_super.cleancache.c 2013-05-01 13:22:44.367763564 +0100
> @@ -61,6 +61,7 @@
> #include <linux/kthread.h>
> #include <linux/freezer.h>
> #include <linux/parser.h>
> +#include <linux/cleancache.h>
>
> static const struct super_operations xfs_super_operations;
> static kmem_zone_t *xfs_ioend_zone;
> @@ -1489,6 +1490,8 @@
> goto out_unmount;
> }
>
> + cleancache_init_fs(sb);
> +
> return 0;
>
> out_filestream_unmount:
I have tested this patch with xfstests
(dd3b5268312e0518ae695e8ee2a618f13805c425) and the output is attached.
I had four reported failures with and without, one seems due to my
locale settings but I don't know what to make of the others. These were
the commands that I ran to prepare my system and execute the tests. If
it would be worth performing more runs or using a different group of
tests please suggest what it would be worth doing. I have also
published the patch in git at:
https://github.com/JKDingwall/linux.git xfs-enable-cleancache
Thanks,
James
# mkfs -t xfs /dev/xvdc1
meta-data=/dev/xvdc1 isize=256 agcount=4, agsize=1048512 blks
= sectsz=512 attr=2, projid32bit=0
data = bsize=4096 blocks=4194048, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
# mkdir /tmp/test
# mkdir /tmp/scratch
# TEST_DEV="/dev/xvdc1" ; export TEST_DEV
# TEST_DIR="/tmp/test" ; export TEST_DIR
# SCRATCH_DEV="/dev/xvdd1" ; export SCRATCH_DEV
# SCRATCH_MNT="/tmp/scratch" ; export SCRATCH_MNT
# mount /dev/xvdc1 /tmp/test
# ./check -xfs -g rw # run 1 - 3.9.0 with cleancache patch
# ./check -xfs -g rw # run 3 - 3.9.1 no patch
[-- Attachment #2: xfstests.1.out.gz --]
[-- Type: application/gzip, Size: 1777 bytes --]
[-- Attachment #3: xfstests.3.out.gz --]
[-- Type: application/gzip, Size: 1887 bytes --]
[-- Attachment #4: Type: text/plain, Size: 121 bytes --]
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-05-13 8:59 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-01 12:39 Cleancache support in XFS James Dingwall
2013-05-01 16:20 ` Ben Myers
2013-05-01 22:30 ` Dave Chinner
2013-05-02 8:24 ` James Dingwall
2013-05-22 19:28 ` Konrad Rzeszutek Wilk
2013-05-24 7:30 ` James Dingwall
2013-06-07 17:08 ` Konrad Rzeszutek Wilk
2013-07-19 7:18 ` James Dingwall
2013-07-22 15:48 ` Konrad Rzeszutek Wilk
2013-07-23 7:23 ` James Dingwall
2013-07-23 8:27 ` Dave Chinner
2013-07-23 8:53 ` James Dingwall
2013-11-21 13:35 ` James Dingwall
2013-11-21 16:07 ` Ben Myers
2013-11-21 22:12 ` Dave Chinner
2013-11-26 16:35 ` Konrad Rzeszutek Wilk
2013-11-26 16:35 ` Konrad Rzeszutek Wilk
2013-05-13 8:59 ` James Dingwall [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-04-30 17:31 Alexey Vlasov
2012-04-30 19:12 ` Christoph Hellwig
2012-05-02 8:02 ` Alexey Vlasov
2012-05-05 23:40 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5190AB76.5050108@zynstra.com \
--to=james.dingwall@zynstra.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox