From: Stan Hoeppner <stan@hardwarefreak.com>
To: xfs@oss.sgi.com
Subject: Re: Questions about XFS
Date: Wed, 12 Jun 2013 07:12:34 -0500 [thread overview]
Message-ID: <51B865B2.5030208@hardwarefreak.com> (raw)
In-Reply-To: <1371025611.7096.10.camel@acme>
On 6/12/2013 3:26 AM, Roger Oberholtzer wrote:
...
> I have an application that is streaming data to an XFS disk at a
> sustained 25 MB/sec. This is well below what the hardware supports. The
> application does fopen/fwrite/fclose (no active flushing or syncing).
Buffered IO.
> I see that as my application writes data (the only process writing the
> only open file on the disk), the system cache grows and grows. Here is
> the unusual part: periodically, writes take some number of seconds to
> complete, rather than the typical <50 msecs). The increased time seems
> to correspond to the increasing size of the page cache.
Standard Linux buffered IO behavior. Note this is not XFS specific.
> If I do:
>
> echo 1 > /proc/sys/vm/drop_caches
Dumps the page cache forcing your buffered writes to disk.
> while the application is runnung, then the writes do not occasionally
> take longer. Until the cache grows again, and I do the echo again.
Which seems a bit laborious.
> I am sure I must be misinterpreting what I see.
Nope. The Linux virtual memory system has behaved this way for quite
some time. You can teak how long IOs stay in cache. See dirty_* at
https://www.kernel.org/doc/Documentation/sysctl/vm.txt
Given the streaming nature you describe, have you looked at possibly
using O_DIRECT?
--
Stan
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-06-12 12:12 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-11 9:56 Questions about XFS Steve Bergman
2013-06-11 13:10 ` Emmanuel Florac
2013-06-11 13:35 ` Stefan Ring
2013-06-11 13:52 ` Ric Wheeler
2013-06-11 13:59 ` Ric Wheeler
2013-06-11 16:12 ` Steve Bergman
2013-06-11 17:19 ` Ric Wheeler
2013-06-11 17:27 ` Stefan Ring
2013-06-11 17:31 ` Ric Wheeler
2013-06-11 17:41 ` Stefan Ring
2013-06-11 18:03 ` Eric Sandeen
2013-06-11 19:30 ` Steve Bergman
2013-06-11 21:03 ` Dave Chinner
2013-06-11 21:43 ` Steve Bergman
2013-06-11 17:59 ` Ben Myers
2013-06-11 17:28 ` Eric Sandeen
2013-06-11 19:17 ` Steve Bergman
2013-06-11 21:47 ` Dave Chinner
2013-07-22 14:59 ` Steve Bergman
2013-07-22 15:16 ` Steve Bergman
2013-06-12 8:26 ` Roger Oberholtzer
2013-06-12 10:34 ` Ric Wheeler
2013-06-12 13:52 ` Roger Oberholtzer
2013-06-12 12:12 ` Stan Hoeppner [this message]
2013-06-12 13:48 ` Roger Oberholtzer
2013-06-13 0:48 ` Dave Chinner
2013-06-11 19:35 ` Ben Myers
2013-06-11 19:55 ` Steve Bergman
2013-06-11 20:08 ` Ben Myers
2013-06-11 21:57 ` Matthias Schniedermeyer
2013-06-11 22:18 ` Steve Bergman
-- strict thread matches above, loose matches on Subject: below --
2013-10-25 14:28 harryxiyou
2013-10-25 14:42 ` Emmanuel Florac
2013-10-25 14:57 ` Eric Sandeen
2013-10-25 16:24 ` harryxiyou
2013-10-25 16:44 ` harryxiyou
2013-10-26 10:41 ` Stan Hoeppner
2013-10-27 3:29 ` Eric Sandeen
2013-10-25 16:13 ` harryxiyou
2013-10-25 16:16 ` Eric Sandeen
2007-03-13 13:40 clflush
2007-03-13 15:36 ` Klaus Strebel
2007-03-13 15:53 ` Stein M. Hugubakken
2007-03-13 15:55 ` Eric Sandeen
2007-03-14 16:33 ` Stewart Smith
2007-03-15 4:26 ` Taisuke Yamada
2007-03-15 9:07 ` clflush
2007-03-15 14:41 ` Geir A. Myrestrand
2007-03-16 10:36 ` Martin Steigerwald
2007-03-17 0:47 ` Jason White
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B865B2.5030208@hardwarefreak.com \
--to=stan@hardwarefreak.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox