public inbox for linux-xfs@vger.kernel.org
 help / color / mirror / Atom feed
From: Eric Sandeen <sandeen@sandeen.net>
To: Eric Sandeen <sandeen@redhat.com>
Cc: xfs-oss <xfs@oss.sgi.com>
Subject: [PATCH V2] xfstests: Test xfs_fsr / swapext management of di_forkoff w/ selinux
Date: Fri, 18 Oct 2013 11:23:14 -0500	[thread overview]
Message-ID: <52616072.6040808@sandeen.net> (raw)
In-Reply-To: <5260B62D.2010507@redhat.com>

In some cases selinux's creation of an xattr on the temporary
fd creates a local xattr, but the file we are trying to 
defragment has attrs in extent format, and the forkoff mismatch
will cause xfs_fsr to fail.  This test demonstrates it;  I
have old patches sent to the list long ago that should fix
it.  I'll resend them soon.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
---

V2: Address Eryu's review

diff --git a/tests/xfs/351 b/tests/xfs/351
new file mode 100755
index 0000000..13c7629
--- /dev/null
+++ b/tests/xfs/351
@@ -0,0 +1,88 @@
+#! /bin/bash
+# FS QA Test No. 351
+#
+# Test xfs_fsr / swapext management of di_forkoff w/ selinux
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2013 Red Hat, Inc.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+_require_scratch
+
+# real QA test starts here
+
+_supported_fs xfs
+_supported_os Linux
+
+getenforce | grep -q "Enforcing\|Permissive" || _notrun "SELinux not enabled"
+[ "$XFS_FSR_PROG" = "" ] && _notrun "xfs_fsr not found"
+
+rm -f $seqres.full
+
+_scratch_mkfs_xfs -i size=256 >> $seq.full 2>&1 || _fail "mkfs failed"
+
+# Manually mount to avoid fs-wide context set by default in xfstests
+mount $SCRATCH_DEV $SCRATCH_MNT
+
+touch $SCRATCH_MNT/$seq.test
+
+# Create an extents-format attribute on a file
+$XFS_IO_PROG -f -c "pwrite -S 0x63 0 4096" $SCRATCH_MNT/attrvals >> $seqres.full 2>&1
+cat $SCRATCH_MNT/attrvals | attr -s name $SCRATCH_MNT/$seq.test >> $seqres.full 2>&1
+
+# Fragment the file by writing backwards
+for I in `seq 6 -1 0`; do
+	dd if=/dev/zero of=$SCRATCH_MNT/$seq.test seek=$I bs=4k \
+	   oflag=direct count=1 conv=notrunc >> $seqres.full 2>&1
+done
+
+# See if xfs_fsr works.
+
+# The target file now has a non-local attribute, but the
+# fsr temp file gets assigned a local attribute on creation,
+# due to selinux.
+    
+# In this case, the large-ish selinux attr will create a forkoff
+# in the temp file smaller than the forkoff in the target file,
+# because the FMT_EXTENTS attr takes up less space.  If there is
+# no mechanism to grow the temp forkoff to match, we can end up
+# failing to swap these 2 inodes if the result is not enough
+# data space in the temp inode as a result.
+
+$XFS_FSR_PROG -v $SCRATCH_MNT/$seq.test | _filter_scratch
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/351.out b/tests/xfs/351.out
new file mode 100644
index 0000000..86cbe5d
--- /dev/null
+++ b/tests/xfs/351.out
@@ -0,0 +1,3 @@
+QA output created by 351
+SCRATCH_MNT/351.test
+extents before:6 after:1 DONE SCRATCH_MNT/351.test
diff --git a/tests/xfs/group b/tests/xfs/group
index acb92ac..da76770 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -180,4 +180,4 @@
 298 auto attr symlink quick
 299 auto quota
 350 auto dump quota
-
+351 auto fsr

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  parent reply	other threads:[~2013-10-18 16:23 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-18  4:16 [PATCH] xfstests: Test xfs_fsr / swapext management of di_forkoff w/ selinux Eric Sandeen
2013-10-18  4:48 ` Eryu Guan
2013-10-18  5:04   ` Eric Sandeen
2013-10-18 16:23 ` Eric Sandeen [this message]
2013-10-18 17:26   ` [PATCH V2] " Eryu Guan
2013-10-18 17:27     ` Eric Sandeen
2013-10-22 21:03   ` Rich Johnston

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52616072.6040808@sandeen.net \
    --to=sandeen@sandeen.net \
    --cc=sandeen@redhat.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox