From: Jeff Liu <jeff.liu@oracle.com>
To: "xfs@oss.sgi.com" <xfs@oss.sgi.com>
Subject: [PATCH 1/4] xfs: wake up cil->xc_commit_wait while removing ctx from cil->xc_committing
Date: Tue, 24 Dec 2013 20:48:18 +0800 [thread overview]
Message-ID: <52B98292.5040002@oracle.com> (raw)
From: Jie Liu <jeff.liu@oracle.com>
I can easily to hit a hang up while running fsstress and shutting down
XFS on SSD via the tests below:
for ((i=0;i<10;i++))
do
echo "[$i] Fire up..."
mount /dev/sda7 /xfs
fsstress -d /xfs -n 1000 -p 100 >/dev/null 2>&1 &
sleep 10
godown /xfs
wait
killall -q fsstress
umount /xfs
echo "[$i] Done...."
echo
done
which yielding a backtrace as below:
[ 246.268987] INFO: task fsstress:3347 blocked for more than 120 seconds.
[ 246.268992] Tainted: PF O 3.13.0-rc2+ #4
[ 246.268994] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 246.268996] fsstress D ffff88026f254440 0 3347 3284
<snip>
[ 246.269013] Call Trace:
[ 246.269022] [<ffffffff816f3829>] schedule+0x29/0x70
[ 246.269054] [<ffffffffa0c4546b>] xlog_cil_force_lsn+0x1cb/0x220 [xfs]
[ 246.269059] [<ffffffff81097210>] ? wake_up_state+0x20/0x20
[ 246.269064] [<ffffffff811e9110>] ? do_fsync+0x80/0x80
[ 246.269087] [<ffffffffa0c43881>] _xfs_log_force+0x61/0x270 [xfs]
[ 246.269091] [<ffffffff8128b490>] ? jbd2_log_wait_commit+0x110/0x180
[ 246.269095] [<ffffffff810a83f0>] ? prepare_to_wait_event+0x100/0x100
[ 246.269098] [<ffffffff811e9110>] ? do_fsync+0x80/0x80
[ 246.269120] [<ffffffffa0c43ab6>] xfs_log_force+0x26/0x80 [xfs]
[ 246.269139] [<ffffffffa0bea31d>] xfs_fs_sync_fs+0x2d/0x50 [xfs]
[ 246.269143] [<ffffffff811e9130>] sync_fs_one_sb+0x20/0x30
[ 246.269147] [<ffffffff811bd5d2>] iterate_supers+0xb2/0x110
[ 246.269150] [<ffffffff811e9262>] sys_sync+0x62/0xa0
[ 246.269156] [<ffffffff816ffd6d>] system_call_fastpath+0x1a/0x1f
[ 266.335154] XFS (sda7): xfs_log_force: error 5 returned.
[ 296.400515] XFS (sda7): xfs_log_force: error 5 returned.
In xlog_cil_force_lsn(), if the task finds a previous sequence still in
committing, it need to wait until all those previously sequence commits
to complete, i.e, blocked on cil->xc_commit_wait wait queue. In normal
situations, the ctx with a previous sequence will eventually commit and
wake up tasks on cil->xc_commit_wait after getting a vaild commit_lsn
(see xlog_cil_push()). However, if something wrong during commit, e.g,
XLOG_STATE_IOERROR is detected, it will be aborted and the ctx will be
just removed from the cil->xc_committing list but we did not wake up
the waiting tasks in this case. Hence, there is a race condition will
happen as below:
Task1 Task2
list_add(&ctx->committing, &cil->xc_committing);
xlog_wait(&cil->xc_commit_wait..)
schedule()...
Aborting!! list_del(&ctx->committing);
wake_up_all(&cil->xc_commit_wait); <-- MISSING!
As a result, we should handle this situation in xlog_cil_committed().
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
---
fs/xfs/xfs_log_cil.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
index 5eb51fc..8c7e9c7 100644
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -406,6 +406,8 @@ xlog_cil_committed(
spin_lock(&ctx->cil->xc_push_lock);
list_del(&ctx->committing);
+ if (abort)
+ wake_up_all(&ctx->cil->xc_commit_wait);
spin_unlock(&ctx->cil->xc_push_lock);
xlog_cil_free_logvec(ctx->lv_chain);
--
1.8.3.2
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next reply other threads:[~2013-12-24 12:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-24 12:48 Jeff Liu [this message]
2013-12-30 15:20 ` [PATCH 1/4] xfs: wake up cil->xc_commit_wait while removing ctx from cil->xc_committing Mark Tinguely
2014-01-01 14:38 ` Jeff Liu
2014-01-02 0:45 ` Dave Chinner
2014-01-03 10:25 ` Jeff Liu
2014-01-03 13:17 ` Jeff Liu
2014-01-03 15:30 ` Mark Tinguely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52B98292.5040002@oracle.com \
--to=jeff.liu@oracle.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).