public inbox for linux-xfs@vger.kernel.org
 help / color / mirror / Atom feed
From: Eric Sandeen <sandeen@redhat.com>
To: Dave Chinner <david@fromorbit.com>
Cc: xfs-oss <xfs@oss.sgi.com>
Subject: Re: [PATCH] xfs: fix remote symlinks on V5/CRC filesystems
Date: Mon, 15 Jun 2015 17:35:27 -0500	[thread overview]
Message-ID: <557F532F.9060505@redhat.com> (raw)
In-Reply-To: <20150615222157.GD10224@dastard>

On 6/15/15 5:21 PM, Dave Chinner wrote:
> On Mon, Jun 15, 2015 at 05:13:50PM -0500, Eric Sandeen wrote:
>> If we create a CRC filesystem, mount it, and create a symlink with
>> a path long enough that it can't live in the inode, we get a very
>> strange result upon remount:
>>
>> # ls -l mnt
>> total 4
>> lrwxrwxrwx. 1 root root 929 Jun 15 16:58 link -> XSLM
>>
>> XSLM is the V5 symlink block header magic (which happens to be
>> followed by a NUL, so the string looks terminated).
>>
>> xfs_readlink_bmap() advanced cur_chunk by the size of the header
>> for CRC filesystems, but never actually used that pointer; it
>> kept reading from bp->b_addr, which is the start of the block,
>> rather than the start of the symlink data after the header.
>>
>> Looks like this problem goes back to v3.10.
>>
>> Fixing this gets us reading the proper link target, again.
>>
>> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
>> Cc: stable@vger.kernel.org
>> ---
>>
>> diff --git a/fs/xfs/xfs_symlink.c b/fs/xfs/xfs_symlink.c
>> index 3df411e..40c0765 100644
>> --- a/fs/xfs/xfs_symlink.c
>> +++ b/fs/xfs/xfs_symlink.c
>> @@ -104,7 +104,7 @@ xfs_readlink_bmap(
>>  			cur_chunk += sizeof(struct xfs_dsymlink_hdr);
>>  		}
>>  
>> -		memcpy(link + offset, bp->b_addr, byte_cnt);
>> +		memcpy(link + offset, cur_chunk, byte_cnt);
>>  
>>  		pathlen -= byte_cnt;
>>  		offset += byte_cnt;
> 
> Looks like the correct fix, so:
> 
> Reviewed-by: Dave Chinner <dchinner@redhat.com>
> 
> However, it raises a more disturbing question: how did we not trip
> over this until now? I though we had long symlink test coverage in
> xfstests but clearly we haven't - do you have a test that closes
> this verification hole?

It was a smaller part of a larger test harness I was using with xfs_metadump,
which was trying to create every type of on-disk metadata.  However, even with
that I only stumbled on it, because I was only verifying that the results were
uncorrupted and consistent with the original, not actually verifying that
what I created was still there (on the original!)

So, I don't have a test specific to this, no, but could certainly write one;
I suppose a quick targeted fstest for just this bug would be ok, although
a test w/ broader scope might make sense too.

-Eric


_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  reply	other threads:[~2015-06-15 22:35 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-15 22:13 [PATCH] xfs: fix remote symlinks on V5/CRC filesystems Eric Sandeen
2015-06-15 22:21 ` Dave Chinner
2015-06-15 22:35   ` Eric Sandeen [this message]
2015-06-15 22:47     ` Dave Chinner
2015-06-15 22:49       ` Eric Sandeen
2015-06-15 23:16         ` Dave Chinner
2015-06-16  1:26           ` Eric Sandeen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=557F532F.9060505@redhat.com \
    --to=sandeen@redhat.com \
    --cc=david@fromorbit.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox