From: Allison Henderson <allison.henderson@oracle.com>
To: Brian Foster <bfoster@redhat.com>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [PATCH v17 08/11] xfs: Hoist xfs_attr_leaf_addname
Date: Fri, 23 Apr 2021 20:26:37 -0700 [thread overview]
Message-ID: <5f31cc3b-cd3b-8b48-a784-ab47965ca522@oracle.com> (raw)
In-Reply-To: <YIL+hEnaC7PG1tri@bfoster>
On 4/23/21 10:06 AM, Brian Foster wrote:
> On Fri, Apr 16, 2021 at 02:20:42AM -0700, Allison Henderson wrote:
>> This patch hoists xfs_attr_leaf_addname into the calling function. The
>> goal being to get all the code that will require state management into
>> the same scope. This isn't particularly aesthetic right away, but it is a
>> preliminary step to merging in the state machine code.
>>
>> Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
>> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
>> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
>> ---
>> fs/xfs/libxfs/xfs_attr.c | 209 ++++++++++++++++++++++-------------------------
>> fs/xfs/xfs_trace.h | 1 -
>> 2 files changed, 96 insertions(+), 114 deletions(-)
>>
>> diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c
>> index 80212d2..5740127 100644
>> --- a/fs/xfs/libxfs/xfs_attr.c
>> +++ b/fs/xfs/libxfs/xfs_attr.c
> ...
>> @@ -287,10 +288,101 @@ xfs_attr_set_args(
>> }
>>
>> if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) {
> ...
>> return error;
>>
>> + xfs_attr3_leaf_remove(bp, args);
>> +
>> + /*
>> + * If the result is small enough, shrink it all into the inode.
>> + */
>> + forkoff = xfs_attr_shortform_allfit(bp, dp);
>> + if (forkoff)
>> + error = xfs_attr3_leaf_to_shortform(bp, args, forkoff);
>> + /* bp is gone due to xfs_da_shrink_inode */
>> +
>> + return error;
>> +node:
>
> With the understanding that this mid function return thing goes away
> before the end of the series:
>
> Reviewed-by: Brian Foster <bfoster@redhat.com>
Great, thank you!
Allison
>
>> /*
>> * Promote the attribute list to the Btree format.
>> */
>> @@ -727,115 +819,6 @@ xfs_attr_leaf_try_add(
>> return retval;
>> }
>>
>> -
>> -/*
>> - * Add a name to the leaf attribute list structure
>> - *
>> - * This leaf block cannot have a "remote" value, we only call this routine
>> - * if bmap_one_block() says there is only one block (ie: no remote blks).
>> - */
>> -STATIC int
>> -xfs_attr_leaf_addname(
>> - struct xfs_da_args *args)
>> -{
>> - int error, forkoff;
>> - struct xfs_buf *bp = NULL;
>> - struct xfs_inode *dp = args->dp;
>> -
>> - trace_xfs_attr_leaf_addname(args);
>> -
>> - error = xfs_attr_leaf_try_add(args, bp);
>> - if (error)
>> - return error;
>> -
>> - /*
>> - * Commit the transaction that added the attr name so that
>> - * later routines can manage their own transactions.
>> - */
>> - error = xfs_trans_roll_inode(&args->trans, dp);
>> - if (error)
>> - return error;
>> -
>> - /*
>> - * If there was an out-of-line value, allocate the blocks we
>> - * identified for its storage and copy the value. This is done
>> - * after we create the attribute so that we don't overflow the
>> - * maximum size of a transaction and/or hit a deadlock.
>> - */
>> - if (args->rmtblkno > 0) {
>> - error = xfs_attr_rmtval_set(args);
>> - if (error)
>> - return error;
>> - }
>> -
>> - if (!(args->op_flags & XFS_DA_OP_RENAME)) {
>> - /*
>> - * Added a "remote" value, just clear the incomplete flag.
>> - */
>> - if (args->rmtblkno > 0)
>> - error = xfs_attr3_leaf_clearflag(args);
>> -
>> - return error;
>> - }
>> -
>> - /*
>> - * If this is an atomic rename operation, we must "flip" the incomplete
>> - * flags on the "new" and "old" attribute/value pairs so that one
>> - * disappears and one appears atomically. Then we must remove the "old"
>> - * attribute/value pair.
>> - *
>> - * In a separate transaction, set the incomplete flag on the "old" attr
>> - * and clear the incomplete flag on the "new" attr.
>> - */
>> -
>> - error = xfs_attr3_leaf_flipflags(args);
>> - if (error)
>> - return error;
>> - /*
>> - * Commit the flag value change and start the next trans in series.
>> - */
>> - error = xfs_trans_roll_inode(&args->trans, args->dp);
>> - if (error)
>> - return error;
>> -
>> - /*
>> - * Dismantle the "old" attribute/value pair by removing a "remote" value
>> - * (if it exists).
>> - */
>> - xfs_attr_restore_rmt_blk(args);
>> -
>> - if (args->rmtblkno) {
>> - error = xfs_attr_rmtval_invalidate(args);
>> - if (error)
>> - return error;
>> -
>> - error = xfs_attr_rmtval_remove(args);
>> - if (error)
>> - return error;
>> - }
>> -
>> - /*
>> - * Read in the block containing the "old" attr, then remove the "old"
>> - * attr from that block (neat, huh!)
>> - */
>> - error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno,
>> - &bp);
>> - if (error)
>> - return error;
>> -
>> - xfs_attr3_leaf_remove(bp, args);
>> -
>> - /*
>> - * If the result is small enough, shrink it all into the inode.
>> - */
>> - forkoff = xfs_attr_shortform_allfit(bp, dp);
>> - if (forkoff)
>> - error = xfs_attr3_leaf_to_shortform(bp, args, forkoff);
>> - /* bp is gone due to xfs_da_shrink_inode */
>> -
>> - return error;
>> -}
>> -
>> /*
>> * Return EEXIST if attr is found, or ENOATTR if not
>> */
>> diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
>> index 808ae33..3c1c830 100644
>> --- a/fs/xfs/xfs_trace.h
>> +++ b/fs/xfs/xfs_trace.h
>> @@ -1914,7 +1914,6 @@ DEFINE_ATTR_EVENT(xfs_attr_leaf_add);
>> DEFINE_ATTR_EVENT(xfs_attr_leaf_add_old);
>> DEFINE_ATTR_EVENT(xfs_attr_leaf_add_new);
>> DEFINE_ATTR_EVENT(xfs_attr_leaf_add_work);
>> -DEFINE_ATTR_EVENT(xfs_attr_leaf_addname);
>> DEFINE_ATTR_EVENT(xfs_attr_leaf_create);
>> DEFINE_ATTR_EVENT(xfs_attr_leaf_compact);
>> DEFINE_ATTR_EVENT(xfs_attr_leaf_get);
>> --
>> 2.7.4
>>
>
next prev parent reply other threads:[~2021-04-24 3:26 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-16 9:20 [PATCH v17 00/11] xfs: Delay Ready Attributes Allison Henderson
2021-04-16 9:20 ` [PATCH v17 01/11] xfs: Reverse apply 72b97ea40d Allison Henderson
2021-04-16 9:20 ` [PATCH v17 02/11] xfs: Add xfs_attr_node_remove_cleanup Allison Henderson
2021-04-16 9:20 ` [PATCH v17 03/11] xfs: Hoist xfs_attr_set_shortform Allison Henderson
2021-04-16 9:20 ` [PATCH v17 04/11] xfs: Add helper xfs_attr_set_fmt Allison Henderson
2021-04-16 9:20 ` [PATCH v17 05/11] xfs: Separate xfs_attr_node_addname and xfs_attr_node_addname_clear_incomplete Allison Henderson
2021-04-19 5:15 ` Chandan Babu R
2021-04-19 18:32 ` Allison Henderson
2021-04-20 12:14 ` Chandan Babu R
2021-04-20 17:41 ` Allison Henderson
2021-04-16 9:20 ` [PATCH v17 06/11] xfs: Add helper xfs_attr_node_addname_find_attr Allison Henderson
2021-04-16 9:20 ` [PATCH v17 07/11] xfs: Hoist xfs_attr_node_addname Allison Henderson
2021-04-19 5:31 ` Chandan Babu R
2021-04-19 18:32 ` Allison Henderson
2021-04-16 9:20 ` [PATCH v17 08/11] xfs: Hoist xfs_attr_leaf_addname Allison Henderson
2021-04-23 17:06 ` Brian Foster
2021-04-24 3:26 ` Allison Henderson [this message]
2021-04-16 9:20 ` [PATCH v17 09/11] xfs: Hoist node transaction handling Allison Henderson
2021-04-16 9:20 ` [PATCH v17 10/11] xfs: Add delay ready attr remove routines Allison Henderson
2021-04-19 6:53 ` Chandan Babu R
2021-04-19 18:32 ` Allison Henderson
2021-04-23 17:06 ` Brian Foster
2021-04-24 3:27 ` Allison Henderson
2021-04-24 15:56 ` Darrick J. Wong
2021-04-26 11:49 ` Brian Foster
2021-04-26 16:52 ` Allison Henderson
2021-04-16 9:20 ` [PATCH v17 11/11] xfs: Add delay ready attr set routines Allison Henderson
2021-04-23 19:08 ` Brian Foster
2021-04-24 3:27 ` Allison Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5f31cc3b-cd3b-8b48-a784-ab47965ca522@oracle.com \
--to=allison.henderson@oracle.com \
--cc=bfoster@redhat.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox