From: Leo Davis <leo1783@yahoo.com>
To: Emmanuel Florac <eflorac@intellique.com>
Cc: xfs@oss.sgi.com
Subject: Re: bad primary superblock - bad magic number !!!
Date: Thu, 13 May 2010 01:38:25 -0700 (PDT) [thread overview]
Message-ID: <606770.71420.qm@web112907.mail.gq1.yahoo.com> (raw)
In-Reply-To: <20100512142902.47d1022a@harpe.intellique.com>
[-- Attachment #1.1: Type: text/plain, Size: 3054 bytes --]
>Uh, you should try the other way around to avoid breaking the
>filesystem :
>dd if=/dev/cciss/c0d2 of=/dev/null bs=131072
>If no error occurs it should be OK.
i did that on all 4 luns
#dd if=/dev/cciss/c0d2 of=/dev/null bs=131072
796+1 records in
796+1 records out
#dd if=/dev/cciss/c0d0 of=/dev/null bs=131072
796+1 records in
796+1 records out
# dd if=/dev/cciss/c0d1 of=/dev/null bs=131072
68675509+1 records in
68675509+1 records out
## dd if=/dev/cciss/c0d3 of=/dev/null bs=131072
68675509+1 records in
68675509+1 records out
I also had a serial cable attached to my P800 controller to capture any traces..this is what that picked up:
/dev/cciss/c0d0: [05/12 13:38:28]Int13 BIOS unit 0x81 = CISS LUN 0x0000004000000
000
/dev/cciss/c0d0: [05/12 13:38:28]Int13 BIOS unit 0x82 = CISS LUN 0x0100004000000
000
/dev/cciss/c0d0: [05/12 13:38:28]Int13 BIOS unit 0x83 = CISS LUN 0x0200004000000
000
/dev/cciss/c0d0: [05/12 13:38:28]Int13 BIOS unit 0x84 = CISS LUN 0x0300004000000
000
/dev/cciss/c0d0: [05/13 09:13:03]PR=030fefb8h D245 Op=1c PLErr=04 IopErr=30 S=00
STag=0x018d Has/dev/cciss/c0d0: hAddr=0x00e59c6c PLLog=0x31190000
/dev/cciss/c0d0: [05/13 09:21:04]Ctlr SCSI Request, Illegal CDB Opcode=0x3c
/dev/cciss/c0d0: [05/13 09:21:08]BadReq:CDB0-15=260008000000A200A000000000000000
,LUN=00000000L00/dev/cciss/c0d0: 000000H
/dev/cciss/c0d0: [05/13 09:21:08]BadReq:CDB0-15=260009000000A200A000000000000000
,LUN=00000000L00/dev/cciss/c0d0: 000000H
/dev/cciss/c0d0: [05/13 09:21:08]BadReq:CDB0-15=26000A000000A200A000000000000000
,LUN=00000000L00/dev/cciss/c0d0: 000000H
/dev/cciss/c0d0: [05/13 09:21:08]BadReq:CDB0-15=26000B000000A200A000000000000000
,LUN=00000000L00/dev/cciss/c0d0: 000000H
/dev/cciss/c0d0: [05/13 09:21:08]BadReq:CDB0-15=26000C000000A200A000000000000000
..the spew continues..
Any thoughts here?
________________________________
From: Emmanuel Florac <eflorac@intellique.com>
To: Leo Davis <leo1783@yahoo.com>
Cc: xfs@oss.sgi.com
Sent: Wed, May 12, 2010 1:29:02 PM
Subject: Re: bad primary superblock - bad magic number !!!
Le Wed, 12 May 2010 02:19:16 -0700 (PDT)
Leo Davis <leo1783@yahoo.com> écrivait:
> havent had much success with testing the hard drives, tried mhdd &
> seatools with no luck yet.
What do you mean? Does the tools report any problem with the drives?
> So is I do a - dd if=/dev/random of=dev/cciss/c0d2 , that should fail
> and therby confirm that the drive or array has issues...do i make any
> sense here?
Uh, you should try the other way around to avoid breaking the
filesystem :
dd if=/dev/cciss/c0d2 of=/dev/null bs=131072
If no error occurs it should be OK.
--
------------------------------------------------------------------------
Emmanuel Florac | Direction technique
| Intellique
| <eflorac@intellique.com>
| +33 1 78 94 84 02
------------------------------------------------------------------------
[-- Attachment #1.2: Type: text/html, Size: 4401 bytes --]
[-- Attachment #2: Type: text/plain, Size: 121 bytes --]
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2010-05-13 8:42 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-10 14:54 bad primary superblock - bad magic number !!! stress_buster
2010-05-10 15:42 ` Eric Sandeen
2010-05-10 18:11 ` Leo Davis
2010-05-10 20:22 ` Emmanuel Florac
2010-05-12 9:19 ` Leo Davis
2010-05-12 12:29 ` Emmanuel Florac
2010-05-12 12:45 ` Leo Davis
2010-05-13 8:38 ` Leo Davis [this message]
2010-05-13 9:41 ` Emmanuel Florac
2010-05-13 11:00 ` Leo Davis
2010-05-13 14:03 ` Emmanuel Florac
2010-05-13 17:23 ` Stan Hoeppner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=606770.71420.qm@web112907.mail.gq1.yahoo.com \
--to=leo1783@yahoo.com \
--cc=eflorac@intellique.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox