From: Dmitry Monakhov <dmonakhov@openvz.org>
To: Rich Johnston <rjohnston@sgi.com>
Cc: linux-fsdevel@vger.kernel.org, linux-ext4@vger.kernel.org,
dchinner@redhat.com, xfs@oss.sgi.com
Subject: Re: [PATCH 09/10] xfstest: add defragmentation stress tests for ext4
Date: Sat, 02 Mar 2013 05:30:43 +0400 [thread overview]
Message-ID: <878v66h9ks.fsf@openvz.org> (raw)
In-Reply-To: <51310046.5090306@sgi.com>
On Fri, 1 Mar 2013 13:23:50 -0600, Rich Johnston <rjohnston@sgi.com> wrote:
> On 02/20/2013 04:42 AM, Dmitry Monakhov wrote:
> > Perform various regression tests for ext4defrag subsystem
> >
> > 299'th Test1: Defragment file while other task does direct AIO
> > 300'th Test2: Perform defragmentation on file under buffered AIO
> > while third task does direct AIO to donor file
> > 301'th Test3: Two defrag tasks use common donor file.
> > 302'th Test4: Stress defragmentation. Several threads pefrorm
> typo perform
>
> > fragmentation at random position use inplace=1 will
> > allocate and free blocks inside defrag event improve
> > load pressure.
> >
> > This tests are considered dengerous because 300'th and 301'th are known
> typo dangerous
>
> > to trigger OOPS on recent kernels see:https://gist.github.com/dmonakhov/4770294
> >
> > Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
> > ---
> > 299 | 126 +++++++++++++++++++++++++++++++++++++++++++++++
> > 299.out | 4 ++
> > 300 | 143 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> > 300.out | 4 ++
> > 301 | 153 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > 301.out | 4 ++
> > 302 | 130 ++++++++++++++++++++++++++++++++++++++++++++++++
> > 302.out | 4 ++
> > common.defrag | 4 +-
> > group | 6 ++-
> > 10 files changed, 575 insertions(+), 3 deletions(-)
> > create mode 100755 299
> > create mode 100644 299.out
> > create mode 100755 300
> > create mode 100644 300.out
> > create mode 100755 301
> > create mode 100644 301.out
> > create mode 100755 302
> > create mode 100644 302.out
> >
> > diff --git a/299 b/299
> > new file mode 100755
> > index 0000000..4a7a98c
> > --- /dev/null
> > +++ b/299
> > @@ -0,0 +1,126 @@
> > +#! /bin/bash
> > +# FSQA Test No. 299
> > +#
> > +# Ext4 defragmentation stress test
> > +# Defragment file while other task does direct io
> > +#-----------------------------------------------------------------------
> > +# (c) 2013 Dmitry Monakhov
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation.
> > +#
> > +# This program is distributed in the hope that it would be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write the Free Software Foundation,
> > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> > +#
> > +#-----------------------------------------------------------------------
> > +#
> > +# creator
> > +owner=dmonakhov@openvz.org
> > +
> > +seq=`basename $0`
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
> > +
> > +# get standard environment, filters and checks
> > +. ./common.rc
> > +. ./common.filter
> > +. ./common.defrag
> > +
> > +# real QA test starts here
> > +_supported_os Linux
> > +_supported_fs ext4
> > +_need_to_be_root
> > +_require_scratch
> > +_require_defrag
> > +
> I think you meant to set NUM_JOBS here like you did in [Patch 08/10],
> something like:
>
> +NUM_JOBS=$((4*LOAD_FACTOR))
Indeed. I've forget to update patch.
>
> otherwise you get
>
> ### [not run] /usr/local/bin/fio too old
>
> > +BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
> > +# We need space for 2 files (test file, and donor one)
> > +# reserve 30% in order to avoid ENOSPC
> > +FILE_SIZE=$((BLK_DEV_SIZE * (512 / (2 + 1))))
> > +
> > +cat >$tmp-$seq.fio <<EOF
> > +# Common e4defrag regression tests
> > +[global]
> > +ioengine=ioe_e4defrag
> > +iodepth=1
> > +directory=${SCRATCH_MNT}
> > +filesize=${FILE_SIZE}
> > +size=999G
> > +buffered=0
> > +fadvise_hint=0
> > +group_reporting
> > +
> > +#################################
> > +# Test1
> > +# Defragment file while other task does direct io
> > +
> > +# Continious sequential defrag activity
> > +[defrag-4k]
> > +ioengine=e4defrag
> > +iodepth=1
> > +bs=128k
> > +donorname=test1.def
> > +filename=test1
> > +inplace=0
> > +rw=write
> > +numjobs=${NUM_JOBS}
> > +runtime=30*${TIME_FACTOR}
> > +time_based
> > +
> > +# Verifier
> > +[aio-dio-verifier]
> > +ioengine=libaio
> > +iodepth=128*${LOAD_FACTOR}
> > +numjobs=1
> > +verify=crc32c-intel
> > +verify_fatal=1
> > +verify_dump=1
> > +verify_backlog=1024
> > +verify_async=1
> > +verifysort=1
> > +direct=1
> > +bs=64k
> > +rw=randwrite
> > +filename=test1
> > +runtime=30*${TIME_FACTOR}
> > +time_based
> > +EOF
> > +
> > +_workout()
> > +{
> > + echo ""
> > + echo " Start defragment activity "
> git does not like trailing whitespace ^
> (same for the other 3 tests)
> > + echo ""
> > + cat $tmp-$seq.fio >> $seq.full
> > + run_check $FIO_PROG $tmp-$seq.fio
> > +}
> > +
> > +_require_fio $tmp-$seq.fio
> > +
> > +_scratch_mkfs >> $seq.full 2>&1
> > +_scratch_mount
> > +
> > +if ! _workout; then
> > + umount $SCRATCH_DEV 2>/dev/null
> > + exit
> > +fi
> > +
> > +if ! _scratch_unmount; then
> > + echo "failed to umount"
> > + status=1
> > + exit
> > +fi
> > +_check_scratch_fs
> > +status=$?
> > +exit diff --git a/299.out b/299.out new file mode 100644 index 0000000..b215a3f
> > diff --git a/299.out b/299.out
> > new file mode 100644
> > index 0000000..c2b0b4c
> > --- /dev/null
> > +++ b/299.out
> > @@ -0,0 +1,4 @@
> > +QA output created by 299
> > +
> > + Start defragment activity
> remove trailing whitespace ^
> (same for the other 3 tests)
>
> Let me know if you agree with these changes and I will make them at
> commit time.
Yes, please do.
>
> Thanks
> --Rich
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-03-02 1:30 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-20 10:42 [PATCH 00/10] xfstests: Stress tests improments v5 Dmitry Monakhov
2013-02-20 10:42 ` [PATCH 01/10] xfstests: add fio requirement V2 Dmitry Monakhov
2013-03-01 15:43 ` Rich Johnston
2013-02-20 10:42 ` [PATCH 02/10] xfstest: add configurable load factors Dmitry Monakhov
2013-03-01 15:43 ` Rich Johnston
2013-02-20 10:42 ` [PATCH 03/10] xfstests: hardcode fops for determinable fsstests runs Dmitry Monakhov
2013-03-01 15:43 ` Rich Johnston
2013-02-20 10:42 ` [PATCH 04/10] xfstets: fsstress add replace file operation Dmitry Monakhov
2013-03-01 15:43 ` Rich Johnston
2013-02-20 10:42 ` [PATCH 05/10] xfstest: allow fsstress to use load factor where appropriate Dmitry Monakhov
2013-03-01 15:43 ` Rich Johnston
2013-02-20 10:42 ` [PATCH 06/10] xfstest: move run_check to common.rc Dmitry Monakhov
2013-03-01 15:44 ` Rich Johnston
2013-02-20 10:42 ` [PATCH 07/10] xfstest: add fallocate/truncate vs AIO/DIO stress test Dmitry Monakhov
2013-03-01 17:49 ` Rich Johnston
2013-02-20 10:42 ` [PATCH 08/10] xfstest: add fallocate/punch_hole " Dmitry Monakhov
2013-03-01 17:50 ` Rich Johnston
2013-02-20 10:42 ` [PATCH 09/10] xfstest: add defragmentation stress tests for ext4 Dmitry Monakhov
2013-03-01 19:23 ` Rich Johnston
2013-03-02 1:30 ` Dmitry Monakhov [this message]
2013-03-04 23:19 ` Rich Johnston
2013-03-03 16:43 ` Zheng Liu
2013-03-03 17:23 ` Zheng Liu
2013-02-20 10:42 ` [PATCH 10/10] xfstests: add disk failure simulation test Dmitry Monakhov
2013-03-01 20:11 ` Rich Johnston
2013-03-02 1:49 ` Dmitry Monakhov
2013-03-04 23:44 ` Rich Johnston
2013-02-25 15:45 ` [PATCH 00/10] xfstests: Stress tests improments v5 Theodore Ts'o
2013-02-25 21:28 ` Ben Myers
2013-02-25 22:09 ` Dave Chinner
2013-02-25 23:00 ` Ben Myers
2013-03-01 20:23 ` Rich Johnston
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=878v66h9ks.fsf@openvz.org \
--to=dmonakhov@openvz.org \
--cc=dchinner@redhat.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=rjohnston@sgi.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox