From: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
To: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org,
"Darrick J . Wong" <djwong@kernel.org>,
Matthew Wilcox <willy@infradead.org>,
Christoph Hellwig <hch@infradead.org>,
Brian Foster <bfoster@redhat.com>,
Andreas Gruenbacher <agruenba@redhat.com>,
Aravinda Herle <araherle@in.ibm.com>
Subject: Re: [PATCHv11 8/8] iomap: Add per-block dirty state tracking to improve performance
Date: Thu, 06 Jul 2023 20:16:05 +0530 [thread overview]
Message-ID: <87jzvdjdxu.fsf@doe.com> (raw)
In-Reply-To: <bb0c58bf80dcdec96d7387bc439925fb14a5a496.1688188958.git.ritesh.list@gmail.com>
"Ritesh Harjani (IBM)" <ritesh.list@gmail.com> writes:
> @@ -1637,7 +1758,7 @@ iomap_writepage_map(struct iomap_writepage_ctx *wpc,
> struct writeback_control *wbc, struct inode *inode,
> struct folio *folio, u64 end_pos)
> {
> - struct iomap_folio_state *ifs = ifs_alloc(inode, folio, 0);
> + struct iomap_folio_state *ifs = folio->private;
> struct iomap_ioend *ioend, *next;
> unsigned len = i_blocksize(inode);
> unsigned nblocks = i_blocks_per_folio(inode, folio);
> @@ -1645,6 +1766,11 @@ iomap_writepage_map(struct iomap_writepage_ctx *wpc,
> int error = 0, count = 0, i;
> LIST_HEAD(submit_list);
>
> + if (!ifs && nblocks > 1) {
> + ifs = ifs_alloc(inode, folio, 0);
> + iomap_set_range_dirty(folio, 0, folio_size(folio));
> + }
> +
> WARN_ON_ONCE(ifs && atomic_read(&ifs->write_bytes_pending) != 0);
>
> /*
> @@ -1653,7 +1779,7 @@ iomap_writepage_map(struct iomap_writepage_ctx *wpc,
> * invalid, grab a new one.
> */
> for (i = 0; i < nblocks && pos < end_pos; i++, pos += len) {
> - if (ifs && !ifs_block_is_uptodate(ifs, i))
> + if (ifs && !ifs_block_is_dirty(folio, ifs, i))
> continue;
>
> error = wpc->ops->map_blocks(wpc, inode, pos);
> @@ -1697,6 +1823,7 @@ iomap_writepage_map(struct iomap_writepage_ctx *wpc,
> }
> }
>
> + iomap_clear_range_dirty(folio, 0, end_pos - folio_pos(folio));
> folio_start_writeback(folio);
> folio_unlock(folio);
>
I think we should fold below change with this patch.
end_pos is calculated in iomap_do_writepage() such that it is either
folio_pos(folio) + folio_size(folio), or if this value becomes more then
isize, than end_pos is made isize.
The current patch does not have a functional problem I guess. But in
some cases where truncate races with writeback, it will end up marking
more bits & later doesn't clear those. Hence I think we should correct
it using below diff.
I have added a WARN_ON_ONCE, but if you think it is obvious and not
required, feel free to drop it.
diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index 2fd9413838de..6c03e5842d44 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -1766,9 +1766,11 @@ iomap_writepage_map(struct iomap_writepage_ctx *wpc,
int error = 0, count = 0, i;
LIST_HEAD(submit_list);
+ WARN_ON_ONCE(end_pos <= pos);
+
if (!ifs && nblocks > 1) {
ifs = ifs_alloc(inode, folio, 0);
- iomap_set_range_dirty(folio, 0, folio_size(folio));
+ iomap_set_range_dirty(folio, 0, end_pos - pos);
}
WARN_ON_ONCE(ifs && atomic_read(&ifs->write_bytes_pending) != 0);
-ritesh
next prev parent reply other threads:[~2023-07-06 14:46 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-01 7:34 [PATCHv11 0/8] iomap: Add support for per-block dirty state to improve write performance Ritesh Harjani (IBM)
2023-07-01 7:34 ` [PATCHv11 1/8] iomap: Rename iomap_page to iomap_folio_state and others Ritesh Harjani (IBM)
2023-07-13 4:31 ` Darrick J. Wong
2023-07-01 7:34 ` [PATCHv11 2/8] iomap: Drop ifs argument from iomap_set_range_uptodate() Ritesh Harjani (IBM)
2023-07-13 4:31 ` Darrick J. Wong
2023-07-01 7:34 ` [PATCHv11 3/8] iomap: Add some uptodate state handling helpers for ifs state bitmap Ritesh Harjani (IBM)
2023-07-13 4:32 ` Darrick J. Wong
2023-07-01 7:34 ` [PATCHv11 4/8] iomap: Fix possible overflow condition in iomap_write_delalloc_scan Ritesh Harjani (IBM)
2023-07-13 4:33 ` Darrick J. Wong
2023-07-01 7:34 ` [PATCHv11 5/8] iomap: Use iomap_punch_t typedef Ritesh Harjani (IBM)
2023-07-13 4:33 ` Darrick J. Wong
2023-07-01 7:34 ` [PATCHv11 6/8] iomap: Refactor iomap_write_delalloc_punch() function out Ritesh Harjani (IBM)
2023-07-01 7:34 ` [PATCHv11 7/8] iomap: Allocate ifs in ->write_begin() early Ritesh Harjani (IBM)
2023-07-01 7:34 ` [PATCHv11 8/8] iomap: Add per-block dirty state tracking to improve performance Ritesh Harjani (IBM)
2023-07-06 14:46 ` Ritesh Harjani [this message]
2023-07-06 17:42 ` Matthew Wilcox
2023-07-06 22:16 ` Dave Chinner
2023-07-06 23:54 ` Matthew Wilcox
2023-07-10 18:19 ` Ritesh Harjani
2023-07-13 4:38 ` Darrick J. Wong
2023-07-13 5:27 ` Ritesh Harjani
2023-07-13 4:36 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87jzvdjdxu.fsf@doe.com \
--to=ritesh.list@gmail.com \
--cc=agruenba@redhat.com \
--cc=araherle@in.ibm.com \
--cc=bfoster@redhat.com \
--cc=djwong@kernel.org \
--cc=hch@infradead.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).