From: "Darrick J. Wong" <djwong@kernel.org>
To: Hironori Shiina <shiina.hironori@gmail.com>
Cc: fstests@vger.kernel.org, linux-xfs@vger.kernel.org,
Hironori Shiina <shiina.hironori@fujitsu.com>
Subject: Re: [PATCH v2] xfs: Test bulkstat special query for root inode
Date: Thu, 22 Dec 2022 10:10:27 -0800 [thread overview]
Message-ID: <Y6SdkwtvvMfvkakG@magnolia> (raw)
In-Reply-To: <20221221223805.148788-1-shiina.hironori@fujitsu.com>
On Wed, Dec 21, 2022 at 05:38:05PM -0500, Hironori Shiina wrote:
> This is a test for the fix:
> bf3cb3944792 xfs: allow single bulkstat of special inodes
> This fix added a feature to query the root inode number of a filesystem.
> This test creates a file with a lower inode number than the root and run
> a query for the root inode.
>
> Signed-off-by: Hironori Shiina <shiina.hironori@fujitsu.com>
Looks good to me,
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
--D
> ---
> tests/xfs/557 | 63 +++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/557.out | 2 ++
> 2 files changed, 65 insertions(+)
> create mode 100644 tests/xfs/557
> create mode 100644 tests/xfs/557.out
>
> diff --git a/tests/xfs/557 b/tests/xfs/557
> new file mode 100644
> index 00000000..608ce13c
> --- /dev/null
> +++ b/tests/xfs/557
> @@ -0,0 +1,63 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2022 Fujitsu Limited. All Rights Reserved.
> +#
> +# FS QA Test No. 557
> +#
> +# This is a test for:
> +# bf3cb3944792 (xfs: allow single bulkstat of special inodes)
> +# Create a filesystem which contains an inode with a lower number
> +# than the root inode. Then verify that XFS_BULK_IREQ_SPECIAL_ROOT gets
> +# the correct root inode number.
> +#
> +. ./common/preamble
> +_begin_fstest auto quick
> +
> +_supported_fs xfs
> +_require_xfs_io_command "falloc"
> +_require_xfs_io_command "bulkstat_single"
> +_require_scratch
> +
> +_fixed_by_kernel_commit XXXXXXXXXXXX \
> + "xfs: get root inode correctly at bulkstat"
> +
> +# A large stripe unit will put the root inode out quite far
> +# due to alignment, leaving free blocks ahead of it.
> +_scratch_mkfs_xfs -d sunit=1024,swidth=1024 > $seqres.full 2>&1 || _fail "mkfs failed"
> +
> +# Mounting /without/ a stripe should allow inodes to be allocated
> +# in lower free blocks, without the stripe alignment.
> +_scratch_mount -o sunit=0,swidth=0
> +
> +root_inum=$(stat -c %i $SCRATCH_MNT)
> +
> +# Consume space after the root inode so that the blocks before
> +# root look "close" for the next inode chunk allocation
> +$XFS_IO_PROG -f -c "falloc 0 16m" $SCRATCH_MNT/fillfile
> +
> +# And make a bunch of inodes until we (hopefully) get one lower
> +# than root, in a new inode chunk.
> +echo "root_inum: $root_inum" >> $seqres.full
> +for i in $(seq 0 4096) ; do
> + fname=$SCRATCH_MNT/$(printf "FILE_%03d" $i)
> + touch $fname
> + inum=$(stat -c "%i" $fname)
> + [[ $inum -lt $root_inum ]] && break
> +done
> +
> +echo "created: $inum" >> $seqres.full
> +
> +[[ $inum -lt $root_inum ]] || _notrun "Could not set up test"
> +
> +# Get root ino with XFS_BULK_IREQ_SPECIAL_ROOT
> +bulkstat_root_inum=$($XFS_IO_PROG -c 'bulkstat_single root' $SCRATCH_MNT | grep bs_ino | awk '{print $3;}')
> +echo "bulkstat_root_inum: $bulkstat_root_inum" >> $seqres.full
> +if [ $root_inum -ne $bulkstat_root_inum ]; then
> + echo "root ino mismatch: expected:${root_inum}, actual:${bulkstat_root_inum}"
> +fi
> +
> +echo "Silence is golden"
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/557.out b/tests/xfs/557.out
> new file mode 100644
> index 00000000..1f1ae1d4
> --- /dev/null
> +++ b/tests/xfs/557.out
> @@ -0,0 +1,2 @@
> +QA output created by 557
> +Silence is golden
> --
> 2.38.1
>
prev parent reply other threads:[~2022-12-22 18:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-21 16:18 [PATCH] xfs: Test bulkstat special query for root inode Hironori Shiina
2022-12-21 16:29 ` Darrick J. Wong
2022-12-21 22:38 ` [PATCH v2] " Hironori Shiina
2022-12-22 18:10 ` Darrick J. Wong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y6SdkwtvvMfvkakG@magnolia \
--to=djwong@kernel.org \
--cc=fstests@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
--cc=shiina.hironori@fujitsu.com \
--cc=shiina.hironori@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox