From: Eryu Guan <guan@eryu.me>
To: "Darrick J. Wong" <djwong@kernel.org>
Cc: guaneryu@gmail.com, linux-xfs@vger.kernel.org, fstests@vger.kernel.org
Subject: Re: [PATCH 2/8] common/xfs: refactor commands to select a particular xfs backing device
Date: Sun, 16 May 2021 23:49:55 +0800 [thread overview]
Message-ID: <YKE/I0HE+2MNSCCG@desktop> (raw)
In-Reply-To: <162078491108.3302755.3627499639796540923.stgit@magnolia>
On Tue, May 11, 2021 at 07:01:51PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
>
> Refactor all the places where we try to force new file data allocations
> to a specific xfs backing device so that we don't end up open-coding the
> same xfs_io command lines over and over.
>
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> ---
> common/populate | 2 +-
> common/xfs | 25 +++++++++++++++++++++++++
> tests/generic/223 | 3 ++-
> tests/generic/449 | 2 +-
> tests/xfs/004 | 2 +-
> tests/xfs/088 | 1 +
> tests/xfs/089 | 1 +
> tests/xfs/091 | 1 +
> tests/xfs/120 | 1 +
> tests/xfs/130 | 1 +
I think above updates should be in a separate patch.
Thanks,
Eryu
> tests/xfs/146 | 2 +-
> tests/xfs/147 | 2 +-
> tests/xfs/235 | 1 +
> tests/xfs/272 | 2 +-
> tests/xfs/318 | 2 +-
> tests/xfs/431 | 4 ++--
> tests/xfs/521 | 2 +-
> tests/xfs/528 | 2 +-
> tests/xfs/532 | 2 +-
> tests/xfs/533 | 2 +-
> tests/xfs/538 | 2 +-
> 21 files changed, 47 insertions(+), 15 deletions(-)
>
>
> diff --git a/common/populate b/common/populate
> index d484866a..e1704b10 100644
> --- a/common/populate
> +++ b/common/populate
> @@ -162,7 +162,7 @@ _scratch_xfs_populate() {
> # Clear the rtinherit flag on the root directory so that files are
> # always created on the data volume regardless of MKFS_OPTIONS. We can
> # set the realtime flag when needed.
> - $XFS_IO_PROG -c 'chattr -t' $SCRATCH_MNT
> + _scratch_xfs_force_bdev data $SCRATCH_MNT
>
> blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
> dblksz="$($XFS_INFO_PROG "${SCRATCH_MNT}" | grep naming.*bsize | sed -e 's/^.*bsize=//g' -e 's/\([0-9]*\).*$/\1/g')"
> diff --git a/common/xfs b/common/xfs
> index 5cd7b35c..49bd6c31 100644
> --- a/common/xfs
> +++ b/common/xfs
> @@ -194,6 +194,31 @@ _xfs_get_file_block_size()
> $XFS_INFO_PROG "$path" | grep realtime | sed -e 's/^.*extsz=\([0-9]*\).*$/\1/g'
> }
>
> +# Set or clear the realtime status of every supplied path. The first argument
> +# is either 'data' or 'realtime'. All other arguments should be paths to
> +# existing directories or empty regular files.
> +#
> +# For each directory, each file subsequently created will target the given
> +# device for file data allocations. For each empty regular file, each
> +# subsequent file data allocation will be on the given device.
> +_scratch_xfs_force_bdev()
> +{
> + local device="$1"
> + shift
> + local chattr_arg=""
> +
> + case "$device" in
> + "data") chattr_arg="-t";;
> + "realtime") chattr_arg="+t";;
> + *)
> + echo "${device}: Don't know what device this is?"
> + return 1
> + ;;
> + esac
> +
> + $XFS_IO_PROG -c "chattr $chattr_arg" "$@"
> +}
> +
> _xfs_get_fsxattr()
> {
> local field="$1"
> diff --git a/tests/generic/223 b/tests/generic/223
> index f6393293..0df84c2b 100755
> --- a/tests/generic/223
> +++ b/tests/generic/223
> @@ -46,7 +46,8 @@ for SUNIT_K in 8 16 32 64 128; do
> # This test checks for stripe alignments of space allocations on the
> # filesystem. Make sure all files get created on the main device,
> # which for XFS means no rt files.
> - test "$FSTYP" = "xfs" && $XFS_IO_PROG -c 'chattr -t' $SCRATCH_MNT
> + test "$FSTYP" = "xfs" && \
> + _scratch_xfs_force_bdev data $SCRATCH_MNT
>
> for SIZE_MULT in 1 2 8 64 256; do
> let SIZE=$SIZE_MULT*$SUNIT_BYTES
> diff --git a/tests/generic/449 b/tests/generic/449
> index 5fd15367..9035b705 100755
> --- a/tests/generic/449
> +++ b/tests/generic/449
> @@ -46,7 +46,7 @@ _scratch_mount || _fail "mount failed"
> # This is a test of xattr behavior when we run out of disk space for xattrs,
> # so make sure the pwrite goes to the data device and not the rt volume.
> test "$FSTYP" = "xfs" && \
> - $XFS_IO_PROG -c 'chattr -t' $SCRATCH_MNT
> + _scratch_xfs_force_bdev data $SCRATCH_MNT
>
> TFILE=$SCRATCH_MNT/testfile.$seq
>
> diff --git a/tests/xfs/004 b/tests/xfs/004
> index 7633071c..b3a00fb6 100755
> --- a/tests/xfs/004
> +++ b/tests/xfs/004
> @@ -31,7 +31,7 @@ _populate_scratch()
> # This test looks at specific behaviors of the xfs_db freesp command,
> # which reports on the contents of the free space btrees for the data
> # device. Don't let anything get created on the realtime volume.
> - $XFS_IO_PROG -c 'chattr -t' $SCRATCH_MNT
> + _scratch_xfs_force_bdev data $SCRATCH_MNT
> dd if=/dev/zero of=$SCRATCH_MNT/foo count=200 bs=4096 >/dev/null 2>&1 &
> dd if=/dev/zero of=$SCRATCH_MNT/goo count=400 bs=4096 >/dev/null 2>&1 &
> dd if=/dev/zero of=$SCRATCH_MNT/moo count=800 bs=4096 >/dev/null 2>&1 &
> diff --git a/tests/xfs/088 b/tests/xfs/088
> index fe621d0a..62360ca8 100755
> --- a/tests/xfs/088
> +++ b/tests/xfs/088
> @@ -48,6 +48,7 @@ _scratch_mkfs_xfs > /dev/null
> echo "+ mount fs image"
> _scratch_mount
> blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
> +_scratch_xfs_force_bdev data $SCRATCH_MNT
>
> echo "+ make some files"
> mkdir -p "${TESTDIR}"
> diff --git a/tests/xfs/089 b/tests/xfs/089
> index 3339ff63..79167a57 100755
> --- a/tests/xfs/089
> +++ b/tests/xfs/089
> @@ -48,6 +48,7 @@ _scratch_mkfs_xfs > /dev/null
> echo "+ mount fs image"
> _scratch_mount
> blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
> +_scratch_xfs_force_bdev data $SCRATCH_MNT
>
> echo "+ make some files"
> mkdir -p "${TESTDIR}"
> diff --git a/tests/xfs/091 b/tests/xfs/091
> index 9304849d..db6bb0b2 100755
> --- a/tests/xfs/091
> +++ b/tests/xfs/091
> @@ -48,6 +48,7 @@ _scratch_mkfs_xfs > /dev/null
> echo "+ mount fs image"
> _scratch_mount
> blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
> +_scratch_xfs_force_bdev data $SCRATCH_MNT
>
> echo "+ make some files"
> mkdir -p "${TESTDIR}"
> diff --git a/tests/xfs/120 b/tests/xfs/120
> index 59ac0433..9fcce9ee 100755
> --- a/tests/xfs/120
> +++ b/tests/xfs/120
> @@ -47,6 +47,7 @@ echo "+ mount fs image"
> _scratch_mount
> blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
> nr="$((blksz * 2 / 16))"
> +_scratch_xfs_force_bdev data $SCRATCH_MNT
>
> echo "+ make some files"
> $XFS_IO_PROG -f -c "pwrite -S 0x62 0 $((blksz * nr))" -c 'fsync' "${SCRATCH_MNT}/bigfile" >> $seqres.full
> diff --git a/tests/xfs/130 b/tests/xfs/130
> index 9fec009f..b4404c5d 100755
> --- a/tests/xfs/130
> +++ b/tests/xfs/130
> @@ -43,6 +43,7 @@ echo "+ mount fs image"
> _scratch_mount
> blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
> agcount="$(_xfs_mount_agcount $SCRATCH_MNT)"
> +_scratch_xfs_force_bdev data $SCRATCH_MNT
>
> echo "+ make some files"
> _pwrite_byte 0x62 0 $((blksz * 64)) "${SCRATCH_MNT}/file0" >> "$seqres.full"
> diff --git a/tests/xfs/146 b/tests/xfs/146
> index 8f85024d..a62b8429 100755
> --- a/tests/xfs/146
> +++ b/tests/xfs/146
> @@ -78,7 +78,7 @@ _scratch_mkfs -r size=$rtsize >> $seqres.full
> _scratch_mount >> $seqres.full
>
> # Make sure the root directory has rtinherit set so our test file will too
> -$XFS_IO_PROG -c 'chattr +t' $SCRATCH_MNT
> +_scratch_xfs_force_bdev realtime $SCRATCH_MNT
>
> # Allocate some stuff at the start, to force the first falloc of the ouch file
> # to happen somewhere in the middle of the rt volume
> diff --git a/tests/xfs/147 b/tests/xfs/147
> index da962f96..0071f5c3 100755
> --- a/tests/xfs/147
> +++ b/tests/xfs/147
> @@ -50,7 +50,7 @@ rextblks=$((rextsize / blksz))
> echo "blksz $blksz rextsize $rextsize rextblks $rextblks" >> $seqres.full
>
> # Make sure the root directory has rtinherit set so our test file will too
> -$XFS_IO_PROG -c 'chattr +t' $SCRATCH_MNT
> +_scratch_xfs_force_bdev realtime $SCRATCH_MNT
>
> sz=$((rextsize * 100))
> range="$((blksz * 3)) $blksz"
> diff --git a/tests/xfs/235 b/tests/xfs/235
> index 1ed19424..553a3bc8 100755
> --- a/tests/xfs/235
> +++ b/tests/xfs/235
> @@ -41,6 +41,7 @@ echo "+ mount fs image"
> _scratch_mount
> blksz=$(stat -f -c '%s' ${SCRATCH_MNT})
> agcount=$(_xfs_mount_agcount $SCRATCH_MNT)
> +_scratch_xfs_force_bdev data $SCRATCH_MNT
>
> echo "+ make some files"
> _pwrite_byte 0x62 0 $((blksz * 64)) ${SCRATCH_MNT}/file0 >> $seqres.full
> diff --git a/tests/xfs/272 b/tests/xfs/272
> index 6c0fede5..2848848d 100755
> --- a/tests/xfs/272
> +++ b/tests/xfs/272
> @@ -38,7 +38,7 @@ _scratch_mkfs > "$seqres.full" 2>&1
> _scratch_mount
>
> # Make sure everything is on the data device
> -$XFS_IO_PROG -c 'chattr -t' $SCRATCH_MNT
> +_scratch_xfs_force_bdev data $SCRATCH_MNT
>
> _pwrite_byte 0x80 0 737373 $SCRATCH_MNT/urk >> $seqres.full
> sync
> diff --git a/tests/xfs/318 b/tests/xfs/318
> index 07375b1f..823f3e6c 100755
> --- a/tests/xfs/318
> +++ b/tests/xfs/318
> @@ -44,7 +44,7 @@ _scratch_mount >> $seqres.full
>
> # This test depends on specific behaviors of the data device, so create all
> # files on it.
> -$XFS_IO_PROG -c 'chattr -t' $SCRATCH_MNT
> +_scratch_xfs_force_bdev data $SCRATCH_MNT
>
> echo "Create files"
> touch $SCRATCH_MNT/file1
> diff --git a/tests/xfs/431 b/tests/xfs/431
> index e67906dc..dd634ed6 100755
> --- a/tests/xfs/431
> +++ b/tests/xfs/431
> @@ -47,7 +47,7 @@ _scratch_mount
>
> # Set realtime inherit flag on scratch mount, suppress output
> # as this may simply error out on future kernels
> -$XFS_IO_PROG -c 'chattr +t' $SCRATCH_MNT &> /dev/null
> +_scratch_xfs_force_bdev realtime $SCRATCH_MNT &> /dev/null
>
> # Check if 't' is actually set, as xfs_io returns 0 even when it fails to set
> # an attribute. And erroring out here is fine, this would be desired behavior
> @@ -60,7 +60,7 @@ if $XFS_IO_PROG -c 'lsattr' $SCRATCH_MNT | grep -q 't'; then
> # Remove the testfile and rt inherit flag after we are done or
> # xfs_repair will fail.
> rm -f $SCRATCH_MNT/testfile
> - $XFS_IO_PROG -c 'chattr -t' $SCRATCH_MNT | tee -a $seqres.full 2>&1
> + _scratch_xfs_force_bdev data $SCRATCH_MNT | tee -a $seqres.full 2>&1
> fi
>
> # success, all done
> diff --git a/tests/xfs/521 b/tests/xfs/521
> index b8026d45..64155662 100755
> --- a/tests/xfs/521
> +++ b/tests/xfs/521
> @@ -55,7 +55,7 @@ testdir=$SCRATCH_MNT/test-$seq
> mkdir $testdir
>
> echo "Check rt volume stats"
> -$XFS_IO_PROG -c 'chattr +t' $testdir
> +_scratch_xfs_force_bdev realtime $testdir
> $XFS_INFO_PROG $SCRATCH_MNT >> $seqres.full
> before=$(stat -f -c '%b' $testdir)
>
> diff --git a/tests/xfs/528 b/tests/xfs/528
> index 7f98c5b8..4db4f513 100755
> --- a/tests/xfs/528
> +++ b/tests/xfs/528
> @@ -77,7 +77,7 @@ test_ops() {
> _notrun "Could not mount rextsize=$rextsize with synthetic rt volume"
>
> # Force all files to be realtime files
> - $XFS_IO_PROG -c 'chattr +t' $SCRATCH_MNT
> + _scratch_xfs_force_bdev realtime $SCRATCH_MNT
>
> log "Test regular write, rextsize=$rextsize"
> mk_file $SCRATCH_MNT/write $rextsize
> diff --git a/tests/xfs/532 b/tests/xfs/532
> index 560af586..1749d6ac 100755
> --- a/tests/xfs/532
> +++ b/tests/xfs/532
> @@ -47,7 +47,7 @@ _scratch_mount >> $seqres.full
>
> # Disable realtime inherit flag (if any) on root directory so that space on data
> # device gets fragmented rather than realtime device.
> -$XFS_IO_PROG -c 'chattr -t' $SCRATCH_MNT
> +_scratch_xfs_force_bdev data $SCRATCH_MNT
>
> bsize=$(_get_block_size $SCRATCH_MNT)
>
> diff --git a/tests/xfs/533 b/tests/xfs/533
> index dd4cb4c4..b73097e1 100755
> --- a/tests/xfs/533
> +++ b/tests/xfs/533
> @@ -58,7 +58,7 @@ _scratch_mount >> $seqres.full
>
> # Disable realtime inherit flag (if any) on root directory so that space on data
> # device gets fragmented rather than realtime device.
> -$XFS_IO_PROG -c 'chattr -t' $SCRATCH_MNT
> +_scratch_xfs_force_bdev data $SCRATCH_MNT
>
> echo "Consume free space"
> fillerdir=$SCRATCH_MNT/fillerdir
> diff --git a/tests/xfs/538 b/tests/xfs/538
> index 97273b88..deb43d7c 100755
> --- a/tests/xfs/538
> +++ b/tests/xfs/538
> @@ -44,7 +44,7 @@ _scratch_mount >> $seqres.full
>
> # Disable realtime inherit flag (if any) on root directory so that space on data
> # device gets fragmented rather than realtime device.
> -$XFS_IO_PROG -c 'chattr -t' $SCRATCH_MNT
> +_scratch_xfs_force_bdev data $SCRATCH_MNT
>
> bsize=$(_get_file_block_size $SCRATCH_MNT)
>
>
next prev parent reply other threads:[~2021-05-16 15:50 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-12 2:01 [PATCHSET 0/8] fstests: miscellaneous fixes Darrick J. Wong
2021-05-12 2:01 ` [PATCH 1/8] xfs/122: add entries for structures added to 5.13 Darrick J. Wong
2021-05-12 2:01 ` [PATCH 2/8] common/xfs: refactor commands to select a particular xfs backing device Darrick J. Wong
2021-05-16 15:49 ` Eryu Guan [this message]
2021-05-16 20:34 ` Darrick J. Wong
2021-05-19 3:03 ` Eryu Guan
2021-05-19 20:46 ` Darrick J. Wong
2021-05-12 2:01 ` [PATCH 3/8] xfs: fix old fuzz test invocations of xfs_repair Darrick J. Wong
2021-05-12 2:02 ` [PATCH 4/8] xfs/117: fix fragility in this fuzz test Darrick J. Wong
2021-05-12 2:02 ` [PATCH 5/8] common: always pass -f to $DUMP_COMPRESSOR Darrick J. Wong
2021-05-12 2:02 ` [PATCH 6/8] fsx/fsstress: round blocksize properly Darrick J. Wong
2021-05-12 2:02 ` [PATCH 7/8] fsx: fix backwards parameters in complaint about overly long copy Darrick J. Wong
2021-05-12 2:02 ` [PATCH 8/8] xfs/178: fix mkfs success test Darrick J. Wong
2021-05-16 15:54 ` Eryu Guan
2021-05-19 23:20 ` Darrick J. Wong
2021-05-16 15:58 ` [PATCHSET 0/8] fstests: miscellaneous fixes Eryu Guan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YKE/I0HE+2MNSCCG@desktop \
--to=guan@eryu.me \
--cc=djwong@kernel.org \
--cc=fstests@vger.kernel.org \
--cc=guaneryu@gmail.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox