From: Andrey Albershteyn <aalbersh@redhat.com>
To: "Darrick J. Wong" <djwong@kernel.org>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [PATCH v2 4/5] xfs_quota: utilize XFS_GETNEXTQUOTA for ranged calls in report/dump
Date: Thu, 28 Apr 2022 10:39:30 +0200 [thread overview]
Message-ID: <YmpSwlJZ2Zb/dFKc@aalbersh.remote.csb> (raw)
In-Reply-To: <20220425163300.GJ17025@magnolia>
On Mon, Apr 25, 2022 at 09:33:00AM -0700, Darrick J. Wong wrote:
> On Wed, Apr 20, 2022 at 04:45:07PM +0200, Andrey Albershteyn wrote:
> > The implementation based on XFS_GETQUOTA call for each ID in range,
> > specified with -L/-U, is quite slow for wider ranges.
> >
> > If kernel supports XFS_GETNEXTQUOTA, report_*_mount/dump_any_file
> > will use that to obtain quota list for the mount. XFS_GETNEXTQUOTA
> > returns quota of the requested ID and next ID with non-empty quota.
> >
> > Otherwise, XFS_GETQUOTA will be used for each user/group/project ID
> > known from password/group/project database.
> >
> > Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
> > Reviewed-by: Christoph Hellwig <hch@lst.de>
> > ---
> > quota/report.c | 116 +++++++++++++++----------------------------------
> > 1 file changed, 35 insertions(+), 81 deletions(-)
> >
> > diff --git a/quota/report.c b/quota/report.c
> > index 8ca154f0..65d931f3 100644
> > --- a/quota/report.c
> > +++ b/quota/report.c
> > @@ -135,7 +135,7 @@ dump_limits_any_type(
> > {
> > fs_path_t *mount;
> > struct fs_disk_quota d;
> > - uint id = 0, oid;
> > + uint id = lower, oid, flags = 0;
> >
> > if ((mount = fs_table_lookup(dir, FS_MOUNT_POINT)) == NULL) {
> > exitcode = 1;
> > @@ -144,27 +144,17 @@ dump_limits_any_type(
> > return;
> > }
> >
> > - /* Range was specified; query everything in it */
> > - if (upper) {
> > - for (id = lower; id <= upper; id++) {
> > - get_dquot(&d, id, &oid, type, mount->fs_name, 0);
> > - dump_file(fp, &d, mount->fs_name);
> > - }
> > - return;
> > - }
> > -
> > - /* Use GETNEXTQUOTA if it's available */
> > - if (get_dquot(&d, id, &oid, type, mount->fs_name, GETNEXTQUOTA_FLAG)) {
> > + while (get_dquot(&d, id, &oid, type,
> > + mount->fs_name, flags | GETNEXTQUOTA_FLAG) &&
> > + !(upper && (d.d_id > upper))) {
> > dump_file(fp, &d, mount->fs_name);
> > id = oid + 1;
>
> Just out of curiosity, could this be "id = d.d_id + 1", and then you
> don't have to pass around &oid at all?
yeah I think it can be removed (haven't noticed that it's not needed
anymore), I will resend it together with fix to another your comment
>
> --D
>
> > - while (get_dquot(&d, id, &oid, type, mount->fs_name,
> > - GETNEXTQUOTA_FLAG)) {
> > - dump_file(fp, &d, mount->fs_name);
> > - id = oid + 1;
> > - }
> > - return;
> > + flags |= GETNEXTQUOTA_FLAG;
> > }
> >
> > + if (flags & GETNEXTQUOTA_FLAG)
> > + return;
> > +
> > /* Otherwise fall back to iterating over each uid/gid/prjid */
> > switch (type) {
> > case XFS_GROUP_QUOTA: {
> > @@ -472,31 +462,19 @@ report_user_mount(
> > {
> > struct passwd *u;
> > struct fs_disk_quota d;
> > - uint id = 0, oid;
> > + uint id = lower, oid;
> >
> > - if (upper) { /* identifier range specified */
> > - for (id = lower; id <= upper; id++) {
> > - if (get_dquot(&d, id, NULL, XFS_USER_QUOTA,
> > - mount->fs_name, flags)) {
> > - report_mount(fp, &d, NULL, form, XFS_USER_QUOTA,
> > - mount, flags);
> > - flags |= NO_HEADER_FLAG;
> > - }
> > - }
> > - } else if (get_dquot(&d, id, &oid, XFS_USER_QUOTA, mount->fs_name,
> > - flags|GETNEXTQUOTA_FLAG)) {
> > - report_mount(fp, &d, NULL, form, XFS_USER_QUOTA, mount,
> > - flags|GETNEXTQUOTA_FLAG);
> > + while (get_dquot(&d, id, &oid, XFS_USER_QUOTA,
> > + mount->fs_name, flags | GETNEXTQUOTA_FLAG) &&
> > + !(upper && (d.d_id > upper))) {
> > + report_mount(fp, &d, NULL, form, XFS_USER_QUOTA, mount, flags);
> > id = oid + 1;
> > flags |= GETNEXTQUOTA_FLAG;
> > flags |= NO_HEADER_FLAG;
> > - while (get_dquot(&d, id, &oid, XFS_USER_QUOTA, mount->fs_name,
> > - flags)) {
> > - report_mount(fp, &d, NULL, form, XFS_USER_QUOTA,
> > - mount, flags);
> > - id = oid + 1;
> > - }
> > - } else {
> > + }
> > +
> > + /* No GETNEXTQUOTA support, iterate over all from password file */
> > + if (!(flags & GETNEXTQUOTA_FLAG)) {
> > setpwent();
> > while ((u = getpwent()) != NULL) {
> > if (get_dquot(&d, u->pw_uid, NULL, XFS_USER_QUOTA,
> > @@ -524,31 +502,19 @@ report_group_mount(
> > {
> > struct group *g;
> > struct fs_disk_quota d;
> > - uint id = 0, oid;
> > + uint id = lower, oid;
> >
> > - if (upper) { /* identifier range specified */
> > - for (id = lower; id <= upper; id++) {
> > - if (get_dquot(&d, id, NULL, XFS_GROUP_QUOTA,
> > - mount->fs_name, flags)) {
> > - report_mount(fp, &d, NULL, form,
> > - XFS_GROUP_QUOTA, mount, flags);
> > - flags |= NO_HEADER_FLAG;
> > - }
> > - }
> > - } else if (get_dquot(&d, id, &oid, XFS_GROUP_QUOTA,
> > - mount->fs_name, flags|GETNEXTQUOTA_FLAG)) {
> > - report_mount(fp, &d, NULL, form, XFS_GROUP_QUOTA, mount,
> > - flags|GETNEXTQUOTA_FLAG);
> > + while (get_dquot(&d, id, &oid, XFS_GROUP_QUOTA,
> > + mount->fs_name, flags | GETNEXTQUOTA_FLAG) &&
> > + !(upper && (oid > upper))) {
> > + report_mount(fp, &d, NULL, form, XFS_GROUP_QUOTA, mount, flags);
> > id = oid + 1;
> > flags |= GETNEXTQUOTA_FLAG;
> > flags |= NO_HEADER_FLAG;
> > - while (get_dquot(&d, id, &oid, XFS_GROUP_QUOTA,
> > - mount->fs_name, flags)) {
> > - report_mount(fp, &d, NULL, form, XFS_GROUP_QUOTA, mount,
> > - flags);
> > - id = oid + 1;
> > - }
> > - } else {
> > + }
> > +
> > + /* No GETNEXTQUOTA support, iterate over all from password file */
> > + if (!(flags & GETNEXTQUOTA_FLAG)) {
> > setgrent();
> > while ((g = getgrent()) != NULL) {
> > if (get_dquot(&d, g->gr_gid, NULL, XFS_GROUP_QUOTA,
> > @@ -575,31 +541,19 @@ report_project_mount(
> > {
> > fs_project_t *p;
> > struct fs_disk_quota d;
> > - uint id = 0, oid;
> > + uint id = lower, oid;
> >
> > - if (upper) { /* identifier range specified */
> > - for (id = lower; id <= upper; id++) {
> > - if (get_dquot(&d, id, NULL, XFS_PROJ_QUOTA,
> > - mount->fs_name, flags)) {
> > - report_mount(fp, &d, NULL, form, XFS_PROJ_QUOTA,
> > - mount, flags);
> > - flags |= NO_HEADER_FLAG;
> > - }
> > - }
> > - } else if (get_dquot(&d, id, &oid, XFS_PROJ_QUOTA,
> > - mount->fs_name, flags|GETNEXTQUOTA_FLAG)) {
> > - report_mount(fp, &d, NULL, form, XFS_PROJ_QUOTA, mount,
> > - flags|GETNEXTQUOTA_FLAG);
> > + while (get_dquot(&d, id, &oid, XFS_PROJ_QUOTA,
> > + mount->fs_name, flags | GETNEXTQUOTA_FLAG) &&
> > + !(upper && (d.d_id > upper))) {
> > + report_mount(fp, &d, NULL, form, XFS_PROJ_QUOTA, mount, flags);
> > id = oid + 1;
> > flags |= GETNEXTQUOTA_FLAG;
> > flags |= NO_HEADER_FLAG;
> > - while (get_dquot(&d, id, &oid, XFS_PROJ_QUOTA,
> > - mount->fs_name, flags)) {
> > - report_mount(fp, &d, NULL, form, XFS_PROJ_QUOTA, mount,
> > - flags);
> > - id = oid + 1;
> > - }
> > - } else {
> > + }
> > +
> > + /* No GETNEXTQUOTA support, iterate over all */
> > + if (!(flags & GETNEXTQUOTA_FLAG)) {
> > if (!getprprid(0)) {
> > /*
> > * Print default project quota, even if projid 0
> > --
> > 2.27.0
> >
>
--
- Andrey
next prev parent reply other threads:[~2022-04-28 8:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-20 14:45 [PATCH v2 0/5] xfsprogs: optimize -L/-U range calls for xfs_quota's dump/report Andrey Albershteyn
2022-04-20 14:45 ` [PATCH v2 1/5] xfs_quota: separate quota info acquisition into get_dquot() Andrey Albershteyn
2022-04-25 16:22 ` Darrick J. Wong
2022-04-20 14:45 ` [PATCH v2 2/5] xfs_quota: separate get_dquot() and dump_file() Andrey Albershteyn
2022-04-24 5:29 ` Christoph Hellwig
2022-04-25 16:28 ` Darrick J. Wong
2022-04-28 12:43 ` Andrey Albershteyn
2022-04-20 14:45 ` [PATCH v2 3/5] xfs_quota: separate get_dquot() and report_mount() Andrey Albershteyn
2022-04-24 5:29 ` Christoph Hellwig
2022-04-25 16:29 ` Darrick J. Wong
2022-04-20 14:45 ` [PATCH v2 4/5] xfs_quota: utilize XFS_GETNEXTQUOTA for ranged calls in report/dump Andrey Albershteyn
2022-04-25 16:33 ` Darrick J. Wong
2022-04-28 8:39 ` Andrey Albershteyn [this message]
2022-04-20 14:45 ` [PATCH v2 5/5] xfs_quota: apply -L/-U range limits in uid/gid/pid loops Andrey Albershteyn
2022-04-24 5:29 ` Christoph Hellwig
2022-04-25 16:33 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YmpSwlJZ2Zb/dFKc@aalbersh.remote.csb \
--to=aalbersh@redhat.com \
--cc=djwong@kernel.org \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox